Ocean Experience REGAL II Operation Manual - page 23
15
Main Engines
The captain and/or owner must read through the manual for the
main engines to find the proper specifications and intervals for
preventive maintenance.
All fluids must be checked and filled to proper levels as needed
before each cruise.
A visual inspection of the water pumps and belts must be done
before each cruise.
A visual inspection for leaks or cracked hoses must be done
before each cruise.
A visual inspection of Racor filters for water should be done
before each cruise.
A visual inspection of sea strainers should be done before each
cruise.
Oil changes and filters must be done according to the
manufacturer specifications.
Oil samples should be taken and sent out for testing whenever
oil change is done.
Fuel filters must be replaced according to the manufacture
specifications.
Racor fuel filters should be replaced when secondary fuel filters
are replaced as needed.
Zinc must be checked and replaced as needed every 120 days
(and at oil change intervals). This may vary due to boat location.
Air intake filters must be checked. Clean and/or replaced
according to manufacture specifications.
Fuel System
Check Racor filters before each cruise.
Filter fuel as needed if vessel sits for extended period (180
days).
Visual check system for leaks weekly.
Use of Bio Bon is recommended as per manufactures
specifications.
Steering System
The captain and/or owner must read through the manual for the
steering system to find the proper specifications and intervals for
preventive maintenance.
A visual check of the fluid level must be done before each
cruise.
A visual inspection of sea strainers should be done before each
cruise.
Control System
The captain and/or owner must read through the manual for the
control system to find the proper specifications and intervals for
preventive maintenance.
A visual check of the fluid level must be done before each
cruise.
Gear Box
The captain and/or owner must read through the manual for the
gear box to find the proper specifications and intervals for
preventive maintenance.
Fluid level check and visual inspection to be done before each
cruise.
Change oil and filter according to manufacture specifications.
Generator (s)
The captain and/or owner must read through the manual for the
generator to find the proper specifications and intervals for
preventive maintenance.
All fluids must be checked and filled to proper levels as needed
before each cruise.
A visual inspection of the water pumps and belts must be done
before each cruise.
A visual inspection for leaks or cracked hoses must be done
before each cruise.
A visual inspection of Racor filters for water should be done
before each cruise.
A visual inspection of sea strainers should be done before each
cruise.
Oil changes and filters must be done according to the
manufacture specifications.
Oil samples should be taken and sent out for testing whenever
oil change is done, per manufacture specifications.
Fuel filters must be replaced according to the manufacture
specifications.
Racor fuel filters should be replaced when secondary fuel filters
are replaced or as needed.
Zinc must be checked and replaced as needed every 120 days
or at oil change intervals. This may vary due to boat location.
Air intake filters must be checked. Clean and/or replaced
according to manufacture specifications.
A/C System
All filters removed, cleaned and replaced monthly.
All drain pans cleaned and checked for debris that might clog
drain line monthly.
All sea strainers should be checked Bi-weekly and cleaned as
needed.
Normal water flow should be noted, so change will be noticed.
Back flush raw water lines annually by manufacturer
specifications.
Electrical System
All battery fluid must be checked once a week and fluid added
as needed.
All battery terminals must be checked for tightness and
corrosion monthly.
All battery cells should be checked with a hydrometer and/or
load test every six months.
All battery chargers checked for proper operation weekly.