Omx-da10xl.
Contents i contents 1 introduction 1 2 getting started 1 3 overview 1 4 using the omx-da10xl video audio distribution amplifier 3 4.1 connecting a omx-da10xl video audio distribution amplifier 3 4.2 increasing the outputs 4 5 technical specifications 6 figures figure 1: omx-da10xl video audio distri...
Introduction 1 1 introduction congratulations on purchasing your ocean matrix® omx-da10xl video audio distribution amplifier. This product comes with a power cord, and this instruction manual. It is ideal for: • audio video duplication studios • rental/staging, cctv, and home theater use 2 getting s...
Overview 2 equalization (eq.), as well as audio trimmer controls for left and right gain, with an enable / disable control button achieving the best performance means: • connecting only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, ...
Using the omx-da10xl video audio distribution amplifier 3 table 2: rear panel omx-da10xl video audio distribution amplifier features # feature function 1 video in bnc connector connects to the video source 2 video loop bnc connector for looping to increase output availability 3 term button pushing i...
Using the omx-da10xl video audio distribution amplifier 4 5. Release the bal/st button to select unbalanced stereo audio operation. 6. Adjust 1 the video trimmer controls 2 for output signal level and/or cable compensation equalization level, if required. 7. If audio control adjustment is required f...
Using the omx-da10xl video audio distribution amplifier 5 5. On the first and second omx-da10xl units, release the term button. On the third omx-da10xl unit, push in the term button to terminate the line to 75 Ω. 6. On each omx-da10xl unit: • connect the power cord to the mains electricity • release...
Technical specifications 6 5 technical specifications table 3 includes the technical specifications: table 3: technical specifications 1 of the omx-da10xl inputs: 1 composite video, 1 looping, 1vpp/75 Ω with termination switch on bnc connectors 2 audio, stereo or balanced mono, 2 looping, on rca con...
