Oceanic ATOM 2.0 Operating Manual - page 72

72

SET TMT 2-3 USE information includes (Fig. 64):

>  Graphics TMT and 2-3 USE.

>  Set Point graphic SELF (or bud) flashing.

  Pressing and releasing the S button momentarily (

seconds) will toggle between SELF and bud.

  Pressing and releasing the A button momentarily (

seconds) will accept the setting and/or advance to SET

TMT 2 (or BUD 1) with ON or OFF flashing.

  Depressing the A and S buttons simultaneously for 2

seconds shall save the setting and revert back to the SET U

screen.

  Depressing and holding the M button for 2 seconds or if no

button is pressed for a period of 2 minutes operation will

revert to the NORM or GAUG SURF MAIN screen.

When set for SELF, TMT 2 and TMT 3 are associated with

Transmitters to be used by a diver using the ATOM for Gas

Switching.

When set for BUD, TMT 1 is associated with the user of the

ATOM and TMT 2 and TMT 3 are associated with Transmitters

to be used by other divers (Buddies) whose Pressure can be

checked by the user of the ATOM.

Fig. 64 - SET TMT 2-3 USE