OCI OCIE48EH Installation & Operation Manual - Note:
Manual is about: Overhead
of
28
Bracket Assembly
Mount bracket Assembly, Wall Mounting:
Step one: Locate the (2) Heater Arm Mount Brackets and install them on
each end of the Heater using the (2) 1/4-20 X 1/2” SS Hex Bolts as shown
below.
7
NOTE:
Use only the mounting brackets provided by the manufacturer.
heater must be leveled only on a Horizontal Axis but can be angled to a
maximum of 30 degrees in reference to the floor. DO NOT mount the
heater on a vertical axis. DO NOT modify brackets. Such installation is
considered unsafe and improper and will automatically VOID the prod-
uct’s warranty.
MOUNTING
HEIGHT
8-9 ft.
COLD/
BREEZY
6 ft. X 6 ft.
MILD
8 ft. X 8 ft.
WELL
PROTECTED
10 ft. X 10 ft.
Desired heating area coverage