Summary of C1243-0001
Page 1
User guide o-box wm set c1243-0001 user guide.
Page 2: Caution
Warning! If the sunshade is damaged or torn, do not touch the damaged surfaces. Dispose of safely. Ÿ do not attempt to move the camera by pulling the flags. Ÿ do not lift the o-box wm by the flags, the flag brackets or the o-grips. Ÿ do not overload the o-box wm as a carrying or rigging point. Ÿ ens...
Page 3: Contents
3 contents caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 the o-box wide mini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 specifications . . . . . . . . ...
Page 4: The O-Box Wide Mini
The o-box wide mini 4.
Page 5
Congratulations on the purchase of your new oconnor o-box wm set! We want you to get the most from your new o-box wm compact mattebox and therefore encourage you to read this user guide to familiarize yourself with its many features, some of which may be new to you. It also covers essential safety i...
Page 6: Specifications
O-box wm set (c1243-0001) o-box wm weight (incl. Top flag bracket, lws rod bracket) . . . . . . . . . . . . . . . . . . . . 0.7 kg (1.54 lbs) dimensions (hwd) . . . . . . . . . . . . . . . . . . . . . . . 210 x 242 x 84 mm (8.3 x 9.5 x 3.3 in.) height, incl. Bottom flag bracket . . . . . . . . . . ....
Page 7: In The Box
In the box filter frames 4"x 4" set of 2 o-box wm set c1243-0001 top or bottom flag filter frames 4"x 5.65" set of 2 o-box wide mini 7.
Page 8: Accessories
Side flags (wings) set of 2 c1243-1122 accessories clamp rings c1243-1123 c1243-1124 c1243-1125 c1243-1126 side flag brackets set of 2 c1243-1121 part no. Clamp ring size (for standard lenses) c1243-1123 c1243-1124 c1243-1125 c1243-1126 150 to 114 mm 150 to 110 mm 150 to 95 mm 150 to 80 mm studio ad...
Page 9: Accessories
Accessories reduction rings c1243-2171 c1243-2172 c1243-2173 bellows ring (donut) c1243-1117 part no. Reduction ring size (for use with bellows ring) c1243-2171 c1243-2172 c1243-2173 114 to 110 mm 114 to 95 mm 114 to 80 mm o-grips 3-system rod bridge c1244-1002 matching oconnor accessories: cine fol...
Page 10: Components
Components 10 top or bottom flag sunshade (mattebox) bellows ring or “donut” (optional) lock lever knurled flag screws (hollow) top or bottom bracket (with utility bar or “cheese stick”) fixing screw (for rotatable stage) lws rod bracket filter stages (front / rear) side flag (asymmetric) rear clamp...
Page 11
Assembly – assembling the filter frames slide the assembled filter frame two filter stages are available between the sunshade and the rear clamping interface: one fixed and one rotatable stage. Slowly push the filter frame down, until it audibly ‘clicks’ into place. If you can feel mechanical resist...
Page 12: Assembling The Flags
Assembling the flags 3 1 if required, turn the lock lever anti-clockwise to unlock the flag axle. Adjust the axle so the hollow knurled screws point upward. Turn the knurled screws anti-clockwise a few turns to slacken. Align the cutouts at the bottom of the flag with the screw threads, then push th...
Page 13: Assembling The Clamp Ring
1 2 choose a clamp ring to suit your camera lens. Turn the knurled screw anti-clockwise to widen the rear clamping interface. The clamp ring uses a collet design making it easier to compress. Squeeze the ring adapter slightly, then carefully fit it into the clamping interface. Fit the clamp ring ove...
Page 14
1 3 2 insert the front of the donut into the clamping interface and push in as far as the tooth profile. Turn the knurled screw clockwise, until it firmly holds the donut in the interface. Insert the reduction ring into the donut thread, then turn clockwise to fix in position. Finally, using the lws...
Page 15: Mounting Onto Camera Rods
Mounting onto camera rods the o-box wm can be fitted with a 15 mm or 19 mm studio adapter and a 3-system (o-grips) rod bridge to suit standard camera rods (see page 9) supporting lightweight to heavy accessory loads. Turning the lock levers clockwise secures the mattebox on the rods. For more inform...
Page 16: Cine Follow Focus
Cine follow focus for precision movement control the o-box wm can be partnered with the cine follow focus. 16.
Page 17
Adjusting the lws rod bracket 1 2 the o-box wm mattebox can be attached to a camera fitted with an oconnor follow focus with the camera rods mounted above or below the camera lens. The complete o-box wm mattebox assembly, including a suitable lens adapter, is then mounted flush on camera rods using ...
Page 18: O-Grips Handgrip System
O-grips handgrip system for more information consult the oconnor o-grips handgrip system user guide (publication part no. C1244-4980) supplied with the product or visit the oconnor website (see page 19). The o-box wm can be equipped with up to six o-grips (a), where the system setup includes a studi...
Page 19: Oconnor Offices Worldwide
Www.Ocon.Com – sales@ocon.Com headquarters 2701 n. Ontario st. Burbank, ca 91504 usa tel.: +1 818 847 8666 fax: +1 818 847 1205 usa 709 executive blvd valley cottage, ny 10989 usa tel.: +1 845 268 0100 fax: +1 845 268 0113 brazil vitec group brazil vitec brazil tecnologias ltda. Rua quintana, 950 – ...
Page 20
C1243-4980/1 o a v connor itec group brand ™.