1. DL manuals
  2. Octava
  3. Amplifier
  4. HDDA34-V1.3
  5. Installation manual

Octava HDDA34-V1.3 Installation manual

Summary of HDDA34-V1.3

  • Page 1

    Description specifications model hdda34-v1.3 optical audio outputs 1 hdmi inputs 3 hdmi outputs 4 version 1.3 hdcp yes in/out connectors 19 pin hdmi female type-a rs-232 control port 1 display selection remote, manual, smart scan video resolution 480 p, 720 i/p, 1080 i/p video data rate 6.75 gbps de...

  • Page 2

    Table of contents 1. Application diagram 2. Installation 3. Smart scan tm 4. Configuring smart scan tm 5. Description 6. Features 7. Remote control guide 8. Disabling / enabling ir remote control receiver 1.

  • Page 3

    Application diagram installation: 1) connect the monitors to the hdmi out ports. 2) connect the hdmi sources to the hdmi in ports. 3) connect the toslink output to your audio receiver. 4) connect the dc power adapter. Smart scan tm : octava’s hdmi switch with smart scan tm saves you the hassle of fu...

  • Page 4

    Configuring smart scan: in the event that you wish to disable the smart scan feature please follow these steps: 1) turn on your hdtv and at least 1 hd source. Make sure led is on. 2) press the manual pushbutton on the front of the unit for ~ 5 seconds until the led flashes. You can turn the smart sc...

  • Page 5

    Rs232 controls: the octava 3x4 hdmi distribution amp can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol for controlling the hdda34. 1. Baud rate=9600 2. Data bits=8 3. Parity check=none 4. Stop bits=1 5. Flow control=none ascii hdmi i...

  • Page 6

    Infrared detector pressing +/- increments/decrements to the next available source. 6 infrared jack 5 front panel control button: led indication: remote control guide: octava’s remote control uses discrete code so can be easily integrated with most universal remote controls such as logitech’s harmony...