- DL manuals
- Octava
- Matrix Switcher
- HDMX42 PRO HD HOME Theater Series
- Installation Manual
Octava HDMX42 PRO HD HOME Theater Series Installation Manual
Summary of HDMX42 PRO HD HOME Theater Series
Page 1
1 installation guide model: hdmx42.
Page 2: Contents
2 contents application diagram ........................................................ 3 description ...................................................................... 3 features .......................................................................... 4 installation .............................
Page 3: Application Diagram
3 application diagram description: the octava 4x2 hdmi matrix switch allows you to display 4 hd sources on 2 hd displays! View any 16 combination of 4 sources on 2 displays for the ultimate hd viewing experience. Optical digital audio output is included for integration with your surround sound audio...
Page 4: Features:
4 features: watch any 4 hd programs simultaneously on 2 displays! 3d support , 1080p 4 hdmi inputs, 2 hdmi outputs. Optical audio output for integration with surround sound system 1 ru mountable edid management. Usb service port for customization needs supports high resolution video 480p, 720i/p, 10...
Page 5: Switch
5 infrared jack dc power input hdmi output (to tv) hdmi output (to tv) infrared receiver switch number 1 2 3 4 name edid switch edid switch edid switch programming/lock switch function edid mode select edid mode select edid mode select programming/lock down= edid programming mode up= locked led indi...
Page 6: Remote Control Guide:
6 pressing +/- increments/decrements to the next available input. Remote control guide: octava ’s remote control uses discrete code so can be easily integrated with most universal remote controls such as logitech’s harmony. Button function notes +, - increments/decrements to the next available sourc...
Page 7
7 basic quick start: use the remote control to select the display that you wish to control followed by the input (dvd, settop) that you wish to watch. For example: -pressing display b, “2” will switch input 2 to hdmi out b. -to connect display a to in1 and display b to in3 you simply follow this seq...
Page 8: Special Configuration:
8 special configuration: distribution amp mode: the hdmx42 can be configured to function as a distribution amp where out a and b displays the same source. To set the hdmx42 to distribution amp mode: 1) press a and b for 5 seconds. Both led will flash “0” matrix mode: to re-set the hdmx42 back to mat...
Page 9: Rs232 Control Commands:
9 rs232 control commands: the octava hd matrix can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol: rs-232 protocol baud rate 9600 data bits 8 parity check none stop bits 1 flow control none basic controls note: the commands are in hex...
Page 10: Switching Commands
10 switching commands note: the commands are in hex. No spaces between hex codes. Output a switching commands hex code select out a to input port 1 0x02 0x32 0x31 0x31 0x03 select out a to input port 2 0x02 0x32 0x31 0x32 0x03 select out a to input port 3 0x02 0x32 0x31 0x33 0x03 select out a to inp...
Page 11: Edid Configuration:
11 edid configuration: the matrix can be configured to 4 edid settings. It is recommended to keep the edid in the default factory mode 1. *custom edid mode can be downloaded via usb. Contact us for this feature. To change the edid settings, please see section “changing edid settings ” for programmin...
Page 12: Changing Edid Mode:
12 changing edid mode: it is recommended to keep the edid in the factory default mode1. If necessary, you may set to different edid mode by following these instructions. Step action notes 1 disconnect all sources and display from matrix 2 set switch 1,2,3,4 to down position as shown 3 set the edid t...
Page 13
13 6 press the “a” button on the front panel. Led will count from “01”- “99” while programming. 7 wait. Programming is complete when led indicates “11” 8 set the program/ lock switch #4 to lock position (up) 9 connect all video sources and displays to matrix and turn on 10 re-power the matrix..
Page 14: 1 Ru Rackmount :
14 1 ru rackmount : the octava 4x2 hd matrix switch can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Front panel ir recei...
Page 15
15 warranty octava warrants the equipment purchased to be free from defects in material and workmanship under normal use and service for a period of 1 year. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 1 year from the date of receipt. If octav...
Page 16: Description
16 description specifications model hdmx42 hdmi inputs 4 hdmi display outputs 2 optical audio output 1 display selection remote, manual, rs232 resolution 480p, 720 i/p, 1080 i/p video data rate 6.75 gbps vertical frequency scan rate 24 / 50 / 60 hz dimension 13.58 x 4.1 x 1.67 inch (344.9 x 104.2 x ...