1. DL manuals
  2. Octava
  3. Network Router
  4. HDMXA71 Pro HD Home Theater Series
  5. Installation Manual

Octava HDMXA71 Pro HD Home Theater Series Installation Manual

Other manuals for HDMXA71 Pro HD Home Theater Series: Installation Manual, Installation Manual

Summary of HDMXA71 Pro HD Home Theater Series

  • Page 1

    1 installation guide model: hdmxa71 rev.H.

  • Page 2: Safety Information:

    2 safety information: electrical safety  use only the power supplies and the ac power cord that were included with your product. Use of other power supplies could damage the product or cause shock, or other hazards  for indoor use only  avoid excessive humidity, or temperature extremes  do not p...

  • Page 3: Contents

    3 contents safety information........................................................... 2 application diagram........................................................ 4 installation....................................................................... 4 description.....................................

  • Page 4: Application Diagram

    4 *note 1: analog output supports only lpcm audio format. Unit does not decode dolby or dts. Note 2: you must set your ps3, or source to lpcm mode in order to use the analog audio output from hdmi. Note 3: aux input port allows connecting a 2nd analog audio source and "loop thru " to the analog audi...

  • Page 5: Description:

    5 description: the hdmxa71 video matrix switch enables video switching of 4 video sources to 2 displays up to 16 viewing combinations. The hdmxa71 also includes both analog and optical audio output for integration with an existing audio system. The optical audio output supports both pcm and bitstrea...

  • Page 6: Front View

    6 4. Wired ir input 7. Aux audio select 6. Input select 5. Infrared detector 2. Aux audio indicator 1. Power indicator 3. Output a/b indicator front view function 1 power indicator 2 aux audio input indicator led is illuminated if the aux input is selected ( loop thru mode) 3 output a/b indicator di...

  • Page 7: Back View

    7 1. Power input (5vdc) 6. Optical audio 2. Hdmi inputs 7. Rs232 3. Hdmi output b 3. Hdmi output a 5. Aux 7.1 audio in 4. Analog 7.1 out back view *note 1: analog output supports only lpcm audio format. Unit does not decode dolby or dts. Note 2: you must set your ps3, or source to lpcm mode in order...

  • Page 8: Remote Control Guide:

    8 pressing +/-increments/decrements to the next available input. Remote control guide: octava’s remote control uses discrete code so can be easily integrated with most universal remote controls such as logitech’s harmony. Button function notes +, - increments/decrements to the next available input 1...

  • Page 9

    9 basic quick start: use the remote control to select output a or b display that you wish to control followed by the input that you wish to watch. For example: -pressing display b, “2” will switch input 2 to out b. -to connect display a to in1 and display b to in3 you simply follow this sequence ste...

  • Page 10: Rs232 Control Commands:

    10 rs232 control commands: the octava hd hdmxa71 can be easily integrated with 3 rd party control systems via rs232 control. The following shows the control protocol: rs-232 protocol baud rate 9600 data bits 8 parity check none stop bits 1 flow control none controlling the hdmxa71 via rs232 can be d...

  • Page 11: Switching Commands

    11 switching commands note: the commands are in hex. No spaces between hex codes. “0x” denotes hex. No need to enter “0x” output a switching commands hex code select out a to input port 1 0x02 0x32 0x31 0x31 0x03 select out a to input port 2 0x02 0x32 0x31 0x32 0x03 select out a to input port 3 0x02...

  • Page 12: Edid Configuration:

    12 edid configuration: the hdmxa71 pre-programmed edid table is listed below (see default edid). In addition, alternative or customized edid can be downloaded via the usb port for optimum integration into your system. Video edid learn edid resolutions from connected devices. If both displays are con...

  • Page 13: 1 Ru Rack Mount :

    13 1 ru rack mount : the octava hdmxa71 can be installed in a 1 ru rack by simply installing the rack mounts included. Disabling /enabling front panel ir remote receiver: to disable the front panel ir remote receiver-insert the plastic plug into the ir jack as shown. Front panel ir receiver -disable...

  • Page 14

    14 warranty octava warrants the equipment purchased to be free from defects in material and workmanship under normal use and service for a period of 1 year. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 1 year from the date of receipt. If octav...

  • Page 15: Description Specifications

    15 description specifications model hdmxa71 hdmi inputs 4 hdmi outputs 2 optical toslink digital audio output 1 2ch pcm, bit stream analog audio output 1 ( 8ch.) supports only lpcm audio format. Unit does not decode dolby or dts. Aux analog audio input (for loop thru /bypass mode) 1 ( 8ch.) aux inpu...