Octet Matrix Audio DE5B-DW50 User Manual - page 5
Page 5
Copyright© 2011 Octet Matrix Audio
System Setup Flow Chart
1) Choose Source, based on output type, from group 1 or 2.
2) Choose receiver/amplifier output from 1a, 1b, 2a, 2b, or 2c.
3) Hook up receiver/amplifier output chosen in step 2 to the DWT4416 input indicated.
4) Follow the steps in System Testing.
Wireless System Testing
Follow the instructions here prior to calibrating the system. This will allow you to confirm
proper wireless operation with the components in their intended primary locations. If
problems are found in this step, follow the Troubleshooting Guide to resolve the issues
before continuing with installation. Please follow these instructions prior to drilling any holes
or permanently mounting any components.
Digital Source
Blu-ray player, DVD player,
CD player, or PC
soundcard
with HDMI, Digital Optical, or
Digital Coaxial output
Receiver/Amplifier
HT Receiver, Audio amplifier
without variable level RCA outputs
DWT4416 RCA
Input
DWT4416
Speaker Level
Input
Receiver/Amplifier
HT Receiver, Audio amplifier
with variable level RCA outputs
Analog Source
MP3 player, iPod, iPhone,
DVD player, CD player, or
PC soundcard
with stereo phono plug or RCA
analog output connectors
Receiver/Amplifier
HT Receiver, Audio amplifier
without variable level RCA outputs
DWT4416 RCA
Input
DWT4416
Speaker Level
Input
Receiver/Amplifier
HT Receiver, Audio amplifier
with variable level RCA outputs
OR
Do not connect
both inputs
OR
Go to
Wireless
System
Testing
Section
DWT4416 RCA
Input
1
2
1a
1b
2a
2b
Do not connect
both inputs
OR
2c