Octet Matrix Audio DE7/BA21-DW60 User Manual

Summary of DE7/BA21-DW60

  • Page 1

    Octet matrix audio de7/ba21-dw60 wireless speaker system user’s guide.

  • Page 2: Table Of Contents

    Page 2 copyright© 2011 octet matrix audio table of contents introduction ........................................................................................................ 3 features .............................................................................................................. ...

  • Page 3

    Page 3 copyright© 2011 octet matrix audio introduction thank you for purchasing one of the critically acclaimed octet matrix audio wireless speaker systems. Please read through the entire manual before attempting to install your wireless speaker system. Wireless setup & operation can sometimes be pr...

  • Page 4

    Page 4 copyright© 2011 octet matrix audio specifications digital wireless system transmission frequency 5.8 ghz transmission method pcm digital audio transmission data rate > 3 mbps audio sampling rate 44.1 khz audio bit depth 16 bit audio sampling method 128 times oversampling error correction 1/2 ...

  • Page 5

    Page 5 copyright© 2011 octet matrix audio digital wireless system transmission frequency 5.8 ghz transmission method pcm digital audio transmission data rate > 4 mbps audio sampling rate 48 khz audio bit depth 24 bit audio sampling method 128 times oversampling error correction 1/2 rate fec signal t...

  • Page 6

    Page 6 copyright© 2011 octet matrix audio digital wireless system transmission frequency 5.8 ghz transmission method pcm digital audio transmission data rate > 3 mbps audio sampling rate 44.1 khz audio bit depth 16 bit audio sampling method 128 times oversampling error correction 1/2 rate fec signal...

  • Page 7

    Page 7 copyright© 2011 octet matrix audio digital wireless system transmission frequency 5.8 ghz transmission method pcm digital audio transmission data rate > 4 mbps audio sampling rate 48 khz audio bit depth 24 bit audio sampling method 128 times oversampling error correction 1/2 rate fec signal t...

  • Page 8

    Page 8 copyright© 2011 octet matrix audio digital source blu-ray player, dvd player, cd player, or pc soundcard with hdmi, digital optical, or digital coaxial output receiver/amplifier ht receiver, audio amplifier without variable level rca outputs dwt4416 rca input dwt4416 speaker level input recei...

  • Page 9

    Page 9 copyright© 2011 octet matrix audio 1) choose source, based on output type, from group 1 or 2. 2) choose receiver/amplifier output from 1a, 1b, 2a, 2b, or 2c. 3) hook up receiver/amplifier output chosen in step 2 to the dwt4416 or dwt4824 input indicated. 4) follow the steps in wireless system...

  • Page 10

    Page 10 copyright© 2011 octet matrix audio correctly without audio dropouts or crackling. If the system does exhibit any of these problems, use the troubleshooting charts to resolve the issue before continuing. Component installation you are now ready to permanently mount the system components. If y...

  • Page 11

    Page 11 copyright© 2011 octet matrix audio dwt4416/dwt4824 transmitter mounting if you choose to mount the transmitter, print out this page. Make sure that page scaling in the print settings is set to “none”. Use a nail, screw tip, or other sharp object to mark the wall or other mounting surface by ...

  • Page 12

    Page 12 copyright© 2011 octet matrix audio wireless speaker placement/mounting the “l” or “r” appended to the end of the model number indicates which channel that speaker will receive from the transmitter. Octet matrix audio wireless speakers can be placed on speaker stands, bookshelves, or on any f...

  • Page 13

    Page 13 copyright© 2011 octet matrix audio 4) if the channels are reversed, check the wiring into the transmitter and re-route the wires if necessary. If the wiring to the transmitter is correct, check all other system wiring and fix any incorrect channel routing. 5) track 3 is a phase verification ...

  • Page 14

    Page 14 copyright© 2011 octet matrix audio problem possible cause solution the transmit light does not go on after dc power is applied to the transmitter. Faulty ac adapter or faulty power outlet. Check the power outlet and the ac adapter. If possible, check for 9 vdc out of the ac adapter. Faulty a...

  • Page 15

    Page 15 copyright© 2011 octet matrix audio advanced test procedures determination of highest output source 1) you should have a voltmeter or a computer with a soundcard* in order to determine which source has the highest output level for a given input signal. You do not need a calibrated measurement...

  • Page 16

    Page 16 copyright© 2011 octet matrix audio fcc statement fcc id pmjt1500 this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including in...