Odys Multi TV 700 Move Manual - Odys Multi Tv 700 Move
ODYS Multi TV 700 Move
6
EN
3 Quick Start Guide
3.1 DVB-T installation – channel search
First Installation
1.
Switch on your Multi TV 700 Move.
2.
Confirm the following query with “Yes” or “Ja” in order to start the channel
search..
3.
Press the „OK“ Key.
New Channel Search using the menu
1.
Switch on your Multi TV 700 Move.
2.
Press then menu key on the remote control.
3.
Select the Menu option „System“ using the
keys.
4.
Press the „OK“ Key in order to display the Menu.
5.
Select the Menu option „Channel Search“ (Sender suchen) using the
keys.
6.
Choose your desired search method for the channel search using the
keys.
7.
It is strongly recommended to choose the Option „Area scan“ (Country
Search).
8.
Press the „OK“ key to start the channel search.
9.
Using the „EXIT“ key you can return to the menu level.
Note
Whether and how many DVB-T channels can be received by Multi Pocket TV 350,
is strongly depending on the operational place, and the DVB-T signal strength in
this Area.
DVB-T radio in particular is very limited and not available in most locations
Please note that for using of DVB-T after each larger local changes, a new
channel search should be accomplished. Since the frequency of the Channels
may Vary from region to region.
3.2 Language Setting
1.
Switch on your Multi TV 700 Move.
2.
Press the menu key on the remote control.
3.
Select the Menu Entry “System” using the
keys.
4.
Press the Key “OK” to display the menu.
5.
Select the Menu „Configuration“ using the
keys.
6.
Press the „OK“ key to enter the menu.
7.
Select the Menu Entry „Display Setting“ option using the
keys.
8.
Move to „OSD Language“ using the
key.
9.
Highlight your desired language using
key in the language list.
10. Confirm the language selection “Deutsch” to select Deutsch as language for
the menu.
11. Confirm your choice with the key “OK”.
12. Use the „EXIT“ key to get back in the main menu.