OFFCARR FreeWheel Setup Manual - Step 4: Which Rear End?
of
12
STEP 4: Which Rear End?
(ALL footrest types need a rear end. )
1. Measure from the front tube/plate to the back of the footrest to determine depth.
WARNING: Clamping the FreeWheel onto your
footrest with the Rear End set too short can
damage the Rear End. Make sure to follow Step 3
below!
Short
Long
Footrest Depths up to 5 inches:
Use SHORT Rear End
Footrest Depths from 5 to 6-7/8 inches:
Use a LONG Rear End
Page 4
2. Using a hack saw cut your straight
shimthe same length as the footrest
depth.
3. Clamp FreeWheel on to footrest.
4. Using a 3/16” allen wrench adjust
the rear end by tightening bolt so the
rear end just touches the footrest
tube/plate.