Officezone Martin Yale 3800 AP Installation, Maintenance & Operating Instructions

1

1-800-543-5454 

(

801) 927-3026

Model 3800AP and 3800FC 

Installation, Maintenance, and Operating Instructions 

Model 3800 Specifications 

Feed Speed  

3800AP……………………………………...Variable to 15,800 sheets per hour 

3800FC…….……………………………......Variable to 12,000 s heets per hour 

Paper Length….…………………..…………3-1/2” min to 22” max 

Paper Width…….…………………..……….3-7/8” min to 18” max 

Paper Weight……………………….………16# bond to 150# card  

Continuous Feed Load Capacity…………...1-3/8” of paper 

Standard Accessories 

3800FC (2) 7-tooth per inch.  Perforating wheels.  (1) Slitting Wheel.  (3) Backup Hubs.  (2) 

Exit Straps. 

3800AP (1) 10-tooth per inch.  Perforating Wheel.  (2) Scoring Wheels.   (1) Stripper.  (4) 

Backup Hubs.  (2) Exit Straps. 

Electrical………………………………….115 V 60 Hz (220 V 50 Hz available) 

                                                                      3.5 amp Circuit Breaker 

Working Dimensions…………………..….36” x 27-1/2” x 13-1/4” 

Shipping Weight………..………………….87 lbs. 

Options…………………………….………960 Machine Stand, Perforating Wheels , Scoring 

Wheels, Slitting 

Introduction 

Thank you for selecting the Martin Yale Model 3800.  This unit has been designed for fast, easy 

operation and will give you years of trouble -free service. 

These instructions are applicable to both the 3800 AutoPerf (AP) and the 3800 Forms Cutter (FC).  

Operational and setup procedures are the same for each machine.  Since the standard accessories 

differ, not all accessory setup procedures will apply to each model.  The 3800AP is equipped with 

a 10-tooth slot typ e perforating wheel, two scoring wheels, a stripper and four backup hubs.  The 

3800FC is equipped with two 7-tooth slit type perforating wheels, one slitting wheel and three 

backup hubs. 

Office Zone

1-800-543-5454