OHAUS 1119D Instructions - Care and Maintenance

CARE AND MAINTENANCE 

The following practices will ensure that your Heavy Duty Solution Balance will give 

years of satisfactory and trouble-free service. 

1.  When not in use, remove any load from the Scale Plate and place the Slotted 

Masses on the Mass Rack.  Slide one of the Poises away from ZERO, so that 

the Balance is not in equilibrium.  This will stop the Balance from oscillating 

and prevent unnecessary wear. 

2.  Use and store the Balance in places that are free from vibration, which can 

cause unnecessary wear. 

3.  Keep the Balance clean at all times, being particularly careful to not let dirt 

accumulate in the vicinity of the bearings.  Never use oil, or any lubricant, on 

the knives or bearings.  Lubrication will reduce the readability and accuracy of 

the Balance. 

4.  Occasionally, it will be necessary to clean accumulated debris from the Magnet 

Faces in the base of the Trig Loop Post Assembly.  Insert a piece of adhesive-

backed tape into the Magnet slot that the aluminum Damper Vane enters.  

Press the tape against the Magnet Face with a ruler or a similar thin strip.  Dirt 

or magnetic particles will adhere to the tape when it is removed and the 

Damper Vane will be able to oscillate freely. 

Ohaus Part No. 127-MO: 

ACCESSORIES 

Description 

Slotted attachment Mass Set 

1-10kg, 1-5kg, 2-2kg, 1-1kg 

Stainless Steel Scoop 

17.2 x 11 x 3.4 / 44 x 28 x 8.5 

SPECIFICATIONS

Ohaus Part No. 80250954: 

Model  Weighing 

Capacity 

Beam weighing 

range 

Readability 

Tare 

Platform type 

and size (in/cm) 

Dimensions 

WxHxD (in/cm) 

Carton size 

WxHxD (in/cm) 

Shipping wt 

(lb/kg) 

1119D 20kg 

1100g 

1g  2270g Stainless steel 

11/27.9 

34x11x11 / 

86.36x27.94x27.94 

36x12x10 / 

91.44x27.94x25.4 

44 / 19.9 

LIMITED WARRANTY 

Ohaus products are warranted against defects in materials and workmanship from the date of 

delivery through the duration of the warranty period. During the warranty period Ohaus will 

repair, or, at its option, replace any component(s) that proves to be defective at no charge, 

provided that the product is returned, freight prepaid, to Ohaus. 

This warranty does not apply if the product has been damaged by accident or misuse, 

exposed to radioactive or corrosive materials, has foreign material penetrating to the inside of 

the product, or as a result of service or modification by other than Ohaus. The warranty period 

shall begin at the date of installation, or three months from shipment to the buyer, whichever 

occurs first.  A properly completed Warranty Registration Card must be received by Ohaus 

within 30 days from date of purchase to initiate coverage under the warranty.  No other 

express or implied warranty is given by Ohaus Corporation. Ohaus Corporation shall not be 

liable for any consequential damages. 

As warranty legislation differs from state to state and country to country, please contact Ohaus 

or your local Ohaus dealer for further details.