OHAUS DS Series Instruction Manual - Operation
6
OPERATION
OPERATION
OPERATION
OPERATION
OPERATION
Turning the Scale ON
Turning the Scale ON
Turning the Scale ON
Turning the Scale ON
Turning the Scale ON
With no load on the platform, switch
the scale ON by pressing the
ON/
OFF/RE-ZERO
button.
When first switched ON, all seg-
ments of the display should be on
as shown in the illustration. This
display check will be displayed brief-
ly, then zero will be displayed. When
zero is displayed, the balance is
ready for use.
Turning the Scale OFF
Turning the Scale OFF
Turning the Scale OFF
Turning the Scale OFF
Turning the Scale OFF
Press the
ON/OFF/RE-ZERO
but-
ton when zero is displayed.
OR
AC Adapter
Receptacle
AC Adapter
AC Adapter
AC Adapter
AC Adapter
AC Adapter
Connect the Power Adapter/
Charger to the receptacle on the
display unit. Plug the adapter into a
convenient AC outlet.