OHAUS STARTER 300 Instruction Manual - Introduction
2
1
Introduction
Thank you for purchasing this high quality OHAUS meter. Please read the manual completely
before using the STARTER 300 portable pH meter to avoid incorrect operation.
The STARTER 300 has an excellent price/performance ratio and is designed with many useful
features including a table top stand, a labeling area, an electrode clip and a wrist strap. Other
accessories such as electrodes, pH buffer power set are also available from OHAUS.
You will find much helpful functionality in these meters. A few of the many existing features are:
Ergonomic, multifunctional design for ambidextrous measurements or table top use
Integrated table top stand for counter use and semi-permanent installations
Integrated labeling design for quick product identification
IP54 protection against dust and water
Ohaus’ renowned user friendly software
1.1
Safety measures
Measures for your protection
Never work in an environment subject to explosion hazards! The housing of
the instrument is not gas tight (explosion hazard due to spark formation,
corrosion caused by the ingress of gases)
When using chemicals and solvents, comply with the instructions of the
producer and the general lab safety rules
Measures for operational safety
Do not unscrew the two halves of the housing
Dry off any liquid spills immediately! The instrument is not watertight
Exclude the following environmental influences:
-
Powerful vibrations
-
Direct sunlight
-
Atmospheric humidity greater than 80%
-
Corrosive gases present
-
Temperatures below 5 °C and above 40 °C
-
Powerful electric or magnetic fields