DL manuals
OHAUS
Scales
Valor 1000
Instruction Manual

OHAUS Valor 1000 Instruction Manual - 1000 Series

Other manuals for Valor 1000: Service Manual, Instruction Manual, Instruction Manual

Page of 14

Download

Print this page

Bookmark us

EN-10 OHAUS Valor

1000 Series

6. TECHNICAL DATA

The technical data is valid under the following ambient conditions:

Ambient temperature: 0°C to 40°C, Maximum Relative humidity: 80% for

temperatures up to 31°1C, decreasing linearity to 50% relative humidity at 40°C.

Height above sea level: Up to 2000m. Operability is assured at ambient

temperatures between 0°C and 40°C Power: AC adapter : 9 or12 VDC, Protection:

Protected against dust and water, Pollution degree: 2 , Installation category: Class

III, EMC: See Declaration of Conformity

6.1 Specifications

TABLE 6-1. Specifications.

Single Display Models

V11P3

V11P6

V11P15

V11P30

Dual Display Models

V11P3T/

V11P3TG*

V11P6T/

V11P6TG*

V11P15T/

V11P15TG*

V11P30T/

V11P30TG*

Capacity (kg)

Readability (g)

0.5

Repeatability (g)

Linearity (g)

Weighing Units*

Kilograms, Pounds, Grams, Ounces

App Modes

Weigh, Accumulate, Checkweigh

Tare range

To capacity by subtraction

Stabilization Time

≤3 seconds

Power requirements

9 VDC 500 mA AC adapter (supplied)

Internal rechargeable sealed lead acid battery

Calibration

Digital with external weight

Battery Life

80/100 hours (with/without backlight on)

Display Type

6-digit 7-segment LCD with blue backlight

Display Size

20 mm / 0.8 in digits

Pan Size

250 x 180 mm. / 9.9 x 7.1in.

Dimensions

255w x 305d x 115h mm / 10w x 12d x 4.5h in

Net Weight

3.2 kg / 7 lb

Shipping Weight

4.0 kg / 8.8 lb

* V11PxTG models have only Kilogram and Gram units enabled

« ‹ Prev 8 9 10 11 12 13 14 Next › »

Summary of Valor 1000

Page 1
Valor™ 1000 series instruction manual 99 washington street melrose, ma 02176 phone 781-665-1400 toll free 1-800-517-8431 visit us at www.Testequipmentdepot.Com.
Page 3: Ohaus Valor
Ohaus valor tm 1000 series en-1 1. Introduction this manual contains installation, operation and maintenance instructions for the ohaus valor tm 1000 series scales. Please read the manual completely before using the scale. 1.1 safety precautions please follow these safety precautions: • verify ac ad...
Page 4: 1000 Series
En-2 ohaus valor tm 1000 series table 1-1. Controls item description 1 low battery indicator 2 battery charge indicator 3 level bubble 4 center of zero, net, stability sum icons 5 7-segment, 6 digit backlit lcd w/ units of measure enunciators 6 over, under , accept check weigh indicators 7 control b...
Page 5: Ohaus Valor
Ohaus valor tm 1000 series en-3 2. Installation 2.1 package contents • valor 1000 scale • stainless steel pan • ac power adapter • instruction manual • warranty card 2.2 location use the scale on a firm, steady surface. Avoid locations with excessive air current, vibrations, heat sources, or rapid t...
Page 6: 1000 Series
En-4 ohaus valor tm 1000 series 2.3.1 battery power the scale can be operated on the internal rechargeable battery when ac power is not available. The scale will automatically switch to battery operation if there is a power failure or the power cord is removed. Before using the scale for the first t...
Page 7: Ohaus Valor
Ohaus valor tm 1000 series en-5 3. Operation 3.1 turning scale on/off to turn the scale on, flip the toggle switch below the right front keyboard. The scale performs a display test, momentarily displays software version, and then enters the active weighing mode. To turn the scale off, toggle same sw...
Page 8: 1000 Series
En-6 ohaus valor tm 1000 series 3.5 accumulate mode use this mode to store the weight and hi, lo, sum statistics from a series of samples. Press zero to set the display to zero. Place the sample on the pan, wait for stabilization. Press m+ to store the weight of the sample. Storage is confirmed by t...
Page 9: Ohaus Valor
Ohaus valor tm 1000 series en-7 4. Settings the scale allows the user to customize several settings including check weigh limits, backlight operation and calibration. 4.1 over and under limits press and hold select, and while still pressing select, press zero until [set--hl] is displayed. Press zero...
Page 10: 1000 Series
En-8 ohaus valor tm 1000 series 4.3 calibration span calibration: turn on the scale. When the display flashes all of the segments ("1~9"), simultaneously press and hold the zero and select key. When "999999" is displayed release both buttons. The display reads "cal ---" press zero key to display "a_...
Page 11: Ohaus Valor
Ohaus valor tm 1000 series en-9 5. Maintenance caution: before cleaning, turn off the scale, remove the ac adapter. 5.1 cleaning the housing may be cleaned with a cloth dampened with a mild detergent if necessary. Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or ...
Page 12: 1000 Series
En-10 ohaus valor tm 1000 series 6. Technical data the technical data is valid under the following ambient conditions: ambient temperature: 0°c to 40°c, maximum relative humidity: 80% for temperatures up to 31°1c, decreasing linearity to 50% relative humidity at 40°c. Height above sea level: up to 2...
Page 13: Ohaus Valor
Ohaus valor tm 1000 series en-11 6.2 compliance compliance to the following standards is indicated by the corresponding mark on the product. This product conforms to the emc directive 2004/108/ec and the low voltage directive 2006/95/ec. The complete declaration of conformity is available from ohaus...
Page 14: 1000 Series
En-12 ohaus valor tm 1000 series iso 9001 registration in 1994, ohaus corporation, usa, was awarded a certificate of registration to iso 9001 by bureau veritus quality international (bvqi), confirming that the ohaus quality management system is compliant with the iso 9001 standard’s requirements. On...