Read and follow all safety rules and operating instructions before using this equipment 80tbs 80 lb broadcast spreader 6000775 - rev a 1/11.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. Follow all safety r...
Tools required for assembly: 7/16" wrench or socket • pliers • (x1) (x1) (x1) 28 (x1) (x1) 16 (x3) 7 (x3) 13 (x1) 2 carton contents.
Attach control drawbar loosely to spreader body with hardware as shown. Attach wire brace and brace clip to drawbar with hardware as shown. Tighten all hardware at this time. Install hitch pin as shown and secure with cotter pin. Make sure wire brace is below drawbar before attaching any hardware. 7...
Periodic maintenance: tighten fasteners as needed before each use • thoroughly wash spreader before storage • before using broadcast spreader: read all safety rules found on page 1. 1. Make sure the drop holes in the bottom of the hopper are fully open with the 2. Rate control handle set on #30. If ...
Broadcast spreader setting matrix look for earthway or ev-n-spred models on the bag for settings. If there is none listed, please use the comparison chart below as a guide to estimate your spreader setting. These settings are approximate and intended as a guide only. Variations in physical character...
Epi warrants this product free of defects in original workmanship and materials for a period of 5-years to the end user with the original purchase receipt for at home use. If used for business, the warranty is 90-days. If a manufacturing non-conformance is found, epi at its discretion will repair or...
7 repair parts.
8 notes.
Www.Ohiosteel.Com (800) 652-2321 designedandtestedin columbus,ohio manufacturedintheu.S.A.Fromdomestic andimportedcomponents model#80tbs.
