Ohlins KA 736 Mounting Instructions

Page of 4

Download

Bookmark us

Shock absorber for Kawasaki Z650

KA 736

Mounting Instructions

otee!

Please note that there can be small differences

between your product and the images in

these instructions.

otee!

Please note that during storage and transport,

especially at high ambient temperature, some

of the oil and grease used for assembly may

leak and stain the packaging. This will not

cause damage to the product, wipe off the

excessive oil or grease with a cloth.

otee!

Before you install this product, check the kit

contents. If anything is missing, please contact

an Öhlins dealer.

arninge!

⚠

Before you install this product, read the Öhlins

Owner’s manual. This product is an important

part of the vehicle and the vehicle stability.

Kit Contents

Description

Part o

Pcs

Shock absorber

KA736

C-spanner single

00710-02

Sticker Memo notes

01180-01

Sticker set Öhlins

Owner’s manual

07241-02

Page 1
Shock absorber for kawasaki z650 ka 736 mounting instructions otee! 1 please note that there can be small differences between your product and the images in these instructions. Otee! 1 please note that during storage and transport, especially at high ambient temperature, some of the oil and grease u...
Page 2: Mou Ti G I Structio S
2 1 put the motorcycle on a work stand so that the rear wheel barely touches the ground. 2 remove seat, right and left side fairing. 3 remove the coolant expansion reservoir screws to gain access to the upper shock absorber attachment screw if necessary. 4 remove the shock absorbers front attachment...
Page 3: Mou Ti G I Structio S
3 mou ti g i structio s this page intentionally left blank.
Page 4: Setup Data
Öhlins racing ab box 722 s-194 27 upplands väsby, sweden phone +46 8 590 025 00 fax +46 8 590 025 80 © Öhlins racing ab. All rights reserved. Any reprinting or unauthorized use without the written permission of Öhlins racing ab is prohibited. Öhlins products are subject to continuous improvement and...