Ohlins TPX Owner's Manual - Adjustments
Adjustments
Compression and Rebound Damping
Tool 01822-03
Rebound Damping Adjuster
Rebound damping on TTX 44 is
adjusted by turning the golden slotted
screw located in the black end-piece .
Total number of clicks on the rebound
adjuster is approximately 18-20.
Rebound damping on TPX 44 is
adjusted with the special tool (01822-
03) which is delivered with the damper.
The total number of clicks is more than
60 but the useful range is 20-40. It is
recommended to adjust rebound in steps
of 2-3 clicks.
Compression Damping Adjuster
Low speed compression is adjusted by
using a 3mm Allen key.
High speed compression is adjusted
with a 12 mm wrench.
It is recommended to adjust low
speed compression in steps of 2-3 clicks
and high speed 3-5 clicks to fi ne tune
the set up. The low speed adjuster has
approximately 40 clicks and high speed
50 clicks.
TTX shock absorber
TPX McPherson
Low speed
compression
damping
High speed
compression
damping
Rebound
damping
TPX McPherson
High speed
compression
damping
Low speed
compression
damping
Rebound
damping
7