OHM bicycle User Manual - One >
ohmcycles.com
O
N
E
>
B
E
F
O
R
E
Y
O
U
R
ID
E
7
ONE >
BEFORE YOU RIDE
>>
NOTE: As already strongly recommended, please read
this Manual in its entirety. Here we explain the importance of
fitting the bike, safety and general maintenance. Be sure you
understand each point in this section before setting out on your
first ride. Refer to specific sections of the Manual for detailed
content to ensure you are prepared and ready for a safe and
enjoyable ride.
1.1
BIKE FIT
1
>
The fit of your bicycle is extremely important. If the bicycle is
too large or too small, this may pose a danger in causing you to
lose control or fall. In addition, proper fit is essential for maximum
performance and comfort. To determine the right size of bike that
suits your body, go to Sections 3.1 and 3.2. Your dealer will also
be able to assist you in finding the right size. When referring to size,
bicycles are measured according to the frame size. This number
(e.g., 18,19,or 20 inches) signifies the size of the frame and the
overall size of the bike.
2
>
With the right sized frame, you can now adjust accessories to
maximize safety, comfort and performance. Start with determining
whether your seat height is set correctly. To check this and/or make
adjustments, go to Section 3.3.
3
>
Now check to ensure the saddle is securely fastened to the post
(see Section 3.3) and the post clamp is secured (see Section 4.2).
A securely fastened saddle does not move in any direction and a
secure post clamp prevents the post from sliding up or down.
4
>
Check to see if the handlebars and stem are set at the right
height for you and are secure. To confirm, go to Section 3.4.
5
>
Now check the brakes. Squeeze the brake levers. Can you
operate them with ease? Do you see the front brake pads grasping
the disc when you squeeze the brake levers? It is also a good idea to
lift your bicycle, spin each wheel, grasp the brake and ensure proper
function. If the brake does not function with ease have your local
dealer/mechanic adjust them.
6
>
Lastly, ensure you fully understand how to operate your new
OHM bicycle (see Section 4.9). Your new bicycle offers features
unlike regular pedal operated bicycles. Contact your local dealer to
have any features or functions explained to you before your first ride.
1.2
SAFETY FIRST!
1
>
ALWAYS WEAR AN APPROVED HELMET WHEN RIDING
YOUR OHM BICYCLE. Please refer to your helmet manufacturer’s
instructions for proper fit, use and care of the helmet. Helmets are
available from your dealer.
2
>
Check to see that you have all required and recommended
safety equipment for your first and future rides. Also, be sure that
you know all laws pertaining to cycling in your region. The laws may
include where you can cycle, the use of hand signals or the need for
mandatory equipment while cycling.
3
>
Next, are your wheels securely fastened to the frame/forks?
Wheels that are not safely secure can wobble and impede the bicycle
performance or worse, dislodge while riding and cause injury or
death. For your OHM bicycle, the front wheel has a quick release