OHM CRED Mark 2 2-4 User Manual - Cred Mark 2 2-4/2-6
of
30
CRED Mark 2 2-4/2-6
Gain
0.0dB
In A
A
Delay
1.50ms
In A
DSP processing
Input Channels
Gain
Delay
! Knob A: Gain, adjustable in 0.2dB steps from -80dB to +20dB
! Knob A: Delay, adjustable in variable steps from 0 to 400ms
The delay parameter is adjustable in fine steps at low values; the adjustment becomes progressively
coarser as the value increases. The velocity sensitive Parameter Knobs therefore provide accurate
setting of driver offset delays (typically below 10ms) and rapid setting of longer system alignment
delays.
Freq
20.0Hz
In A
High Pass Filter
B
HPF
Shape
LR24
A
B
C
A
B
C
A
B
C
A
A
!
Knob A: Gain, adjustable in 0.2dB steps from -80dB to +20dB
Knob B: High Pass Filter type
!
3
13