OIC Korea CMK-01 Installation And User Manual - page 3
Installation and User’s Guide
http://www.oickorea.com
Tel: 82-70-7510-2809 / Fax: 82-70-8240-4403 / Email: sales@oickorea.com
pg3
CMK-01 Installation
STEP1
Screw the CMK-01 coupling adapter to the adjustable suspension adapters or 1½" (NTP) Pipe.
Secure the coupling with the M6 security screw (supplied). Figure 1.
Coupler
Coupler
Swivel lock (Located
inside Coupler)
Keyhole mounting
opening
VESA 75 / 100
Mounting points
Adjustable Ceiling Adapter
Single Stud Installation
STEP2
Secure the ceiling plate to the ceiling structure (see WARNING).
STEP3
Use suitable hardware (commercially available) depending on your installation environment to
secure the two (2) mounting points found on the ceiling plate to the ceiling structure (Figure 2).
STEP4
Refer to ceiling adapter installation instructions.
Figure 2
This hardware is commercially
available and is not included
in the hardware pack.
Relocate adjustment screw
Cable access opening
(Commercially
Available) Suitable
Hardware minimum
of 1/4” x 2” Lag bolt
required
Lower tube
Upper tube
Adjustment screw
Use the two (2) slots on the ceiling
Plate for single stud mounting
Ceiling structure
(See warning)
Minimum of 2” x 4”
Wood stud