OIC Korea VF703GHC Installation and user manual - page 7
Installation and User ’s Guide
Installation and User ’s Guide
http://www.orionimages.com
http://www.orionimages.com
12
13
5-4 Anton Bauer mount battery plate (optional)
Color Temp
6-1 Power & TALLY cable
BB-AB
6. WIRING INSTRUCTIONS
1
2
3
4
5
6
1. XLR (M) connector: to connect the XLR connector on device.
2. DC Power adapter connector.
3. Red: for TALLY red light connector.
4. Green: for TALLY green light connector.
5. Black: for grounding.
6. XLR (F) connector: for the XLR adapter.
Settings: User, 6500º K, 7500º K, 9300º K.
Default: User
On User mode, user can adjust RGB gain and bias.
User mode is recommended for professional users only.
Check Field
Settings: Off, Mono, Red, Green, Blue
Default: Off
Setting Mono, Red, Green or Blue display color
Aspect Ratio
Settings: 4:3, 16:9, Full Screen.
Default: 4:3
Setting screen aspect ratio: 4:3, 16:9 and full screen
6. SETTING MENU
Before setting the functions, please make sure the device is connected correctly.
When power on, press
BRI/MENU knob on the device, function menus will pop-up on the screen.
After confirm the option value, then press
BRI/MENU knob to return to the previous, and press the
BRI/MENU knob again to exit the menu settings.
BRI / MENU knob: to select an option. SAT knob to select the main menu, adjusting option values
and confirm the selection.