Okayo AT-200 Instruction Manual - page 9
AT‐200 Instruction Manual (internal use)
10
If a # track number (
Fig. 8‐1
) is correctly entered, track image (if it is preset in Audio Master)
and text “# + track number” (underneath) (
Fig. 8‐2
) will show up while it is playing. If it is
stopped in the middle (
Fig. 8‐2
) or in the end (
Fig. 8‐3
), text “press stop
then # to return
to the tour.” (
Fig. 8‐4
) comes out. At this time, press
key or # key to return to the
stand‐by screen of # level with text “PRESS #” underneath (
Fig. 8‐5
). Then, press # key again
to return to the timing (01:10) of the tour you just left (
Fig. 8‐6
).
Fig. 8‐1
Fig. 8‐2
Fig.8‐3
Fig. 8‐4
Fig. 8‐5
Fig.
8‐6
If a # track number is incorrectly entered (
Fig. 9‐1
), text “Number is incorrect. Press stop
then # to return to the tour.” (
Fig. 9‐2
) will show up. At this time, press
key or # key to
return to the stand‐by screen of # level with text “PRESS #” underneath (
Fig. 9‐3
). Then, press
# key again to return to the timing (01:10) of the tour you just left (
Fig. 9‐4
).
Fig. 9‐1
Fig. 9‐2
Fig. 9‐3
Fig. 9‐4