OKBABY SIRIUS Instructions For Use And Assembly - page 5
ENGLISH
ENGLISH
Chapter 6/7
Childʼs bicycle seat OKBABY SIRIUS
Page 69
Chapter 6
Childʼs bicycle seat OKBABY SIRIUS
Page 68
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
Instructions for use and assembly
LIB006R06EU Edition: 09-2007
Figure 8:
When the backrest is in an upright positi-
on, loosen the screws (20) using the sup-
plied wrench.
WARNING! Do not unscrew the screw
(20) completely, just loosen it enough to
slide the seat on the plate. Slide the seat
forwards or backwards until you reach
the recommended barycentre position.
Tighten the screws (20). Your child seat
is now correctly fitted onto your bicycle.
Ad just the vertical position following the
instructions in the diagram, when the seat
is correctly in place, tighten the screws (9)
slowly and evenly until the fastening block
stops rotating around the frame.
Slide the front cover (18) over the front
part of the block. Cover the fastening
counter-block (7) with the protection
cover (11).
Figure 9:
Fastening the footrests.
To fasten the footrest insert it in the
highest position on the shaped adjuster
slot, while keeping the fixing bridges of
the safety belt on the outside of the seat.
Insert the regulating pin (21) from the
outside of the seat towards the inside as
illustrated, making sure that the right pin
meets the right side and vice versa. Both
of the pins and sides of the seat are mar-
ked with DX=right and SX=left. Slide the
footrests (4) down.
4
DX
DX
21
9
20
8
Figure 10:
Extracting the footrests.
To extract the footrests, turn the adjuster
lever (21) upwards, move the footrest (4)
upwards as far as possible, remove the
adjuster lever outwards to free the sup-
port.
7
User instructions
Figure 1:
Setting the inclination of the child seat.
Press and turn the inclination knob (16)
until the backrest is in the desired posi-
tion.
DANGER! When adjusting the incli-
nation of the backrest, the child seat
moves forward and the footrests may
catch when pedalling.
Figure 2:
Adjusting the footrests.
To adjust the height of the footrests (4),
turn the adjuster lever (21) upwards, once
you have found the right position, turn the
adjuster lever downwards to fix the foot-
rests in place
4
21
90°
120°
21
4
10
1
2