Oki 70042501 Manual - Installing The Software

Manual is about: 8/16 MB FLASH DIMM KIT Flash DIMM Option Kits

Summary of 70042501

  • Page 1

    Flash dimm option kits oki 8 mb flash dimm kit #70042501 oki 16 mb flash dimm kit #70042601.

  • Page 2

    Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki data assumes no responsibility for the results of errors beyond its control. Oki data also cannot guarantee that changes in software and equipment made by other manufacturers and ref...

  • Page 3: Contents

    Contents contents i introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 installing the flash dimm card. . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ve...

  • Page 5: Introduction

    Introduction 1 introduction important! The flash dimm option kits allow downloading pcl fonts and forms to the printer. How these fonts and forms are used in printed documents depends on the particular operating system and software application in use. This requires programming experience and an unde...

  • Page 6: General Information

    2 general information general information the flash dimm card can be used to store fonts and overlays (pcl macros), both of which are downloaded to the dimm using the storage device manager (sdm) software supplied on the cd with the kit. Fonts fonts in either of the following formats can be stored: ...

  • Page 7: Caution!

    Installing the flash dimm card 3 installing the flash dimm card caution! To avoid damage by static electricity or rough handling, keep the flash dimm in its packaging until you’re ready to install it. Note : the printer has only one slot in which to install an optional flash dimm card or the optiona...

  • Page 8

    4 installing the flash dimm card b. Remove the access panel. 3. Locate the slot:.

  • Page 9: Caution!

    Installing the flash dimm card 5 caution! To avoid damage to the flash dimm from static electricity, ground yourself (touch metal) before handling it. 4. Remove the flash dimm from its packaging. 5. Hold the flash dimm with the gold contact edge down and the notched corner ( 1 ) to the right..

  • Page 10

    6 installing the flash dimm card 6. Place the dimm in the slot and press down firmly until it snaps into place..

  • Page 11

    Installing the flash dimm card 7 7. Replace the access panel: a. Align the tabs at the bottom of the access panel with the slots in the printer. B. Swing the panel up and tighten the screw to secure it in place. 8. Reattach the interface cord and power cable, then turn on the printer..

  • Page 12: Note

    8 verifying correct installation verifying correct installation 1. Print a menumap: a. Press on line to place the printer off line. B. Press menu one or more times until information menu appears. C. Press item + one or more times until print menu map appears. D. Press select. The menumap prints. 2. ...

  • Page 13: Installing The Software

    Installing the software 9 installing the software the cd supplied with your flash dimm installs the storage device manager software, used to download fonts and pcl macros to the flash dimm: 1. Place the cd in your cd-rom drive and wait for it to autorun. (if the cd does not autorun, click start → ru...

  • Page 14: Pcl Macro Control Codes

    10 pcl macro control codes pcl macro control codes the following table summarizes the control codes for pcl macros. For a complete list of control codes supported by the printer, see the reference pdf file in the root directory of the cd supplied with the flash dimm. Command explanation esc&f#y macr...

  • Page 16

    Oki data americas, inc. 2000 bishops gate blvd. Mt. Laurel, nj 08054-4620 phone: (800) 654-3282 fax: (856) 222-5320 www.Okidata.Com 58366601.