1. DL manuals
  2. Oki
  3. All in One Printer
  4. ES5463
  5. User Manual

Oki ES5463 User Manual

Summary of ES5463

  • Page 1

    Mc563/es5463 mfp user’s manual.

  • Page 2

    - 2 - table of contents 1 before starting .............................................................................................. 4 cautions related to safety ............................................................................................................5 general cautions ..........

  • Page 3

    - 3 - creating a shared folder in a computer ....................................................................................................88 registering a destination (profile) .............................................................................................................89 how ...

  • Page 4: Before Starting

    1 before starting cautions related to safety general cautions about this manual trademarks and other information license.

  • Page 5

    - 5 - 1. Before starting cautions related to safety indicates additional information which, if ignored or not followed, may result in personal injury or death. Indicates additional information which, if ignored, may result in personal injury..

  • Page 6

    - 6 - 1. Before starting general cautions do not touch the safety switch inside this machine. High voltage may occur, resulting in electric shock. Also, a gear may rotate, resulting in injury. Do not use a highly combustible spray near this machine. Some parts inside the machine become very hot, pos...

  • Page 7

    - 7 - 1. Before starting note! This product is not intended for use in the immediate visual field on the display work place. To avoid disturbing reflections on the display work place, this product shall not be placed in the immediate field of vision. Do not touch a broken liquid crystal display. Inj...

  • Page 8

    - 8 - 1. Before starting about this manual various information about this manual is provided here. Read these sections before using this manual. • disclaimer every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no ...

  • Page 9

    - 9 - 1. Before starting about illustrations the illustrations of mc563 are used in this manual as examples. Illustrations of the display screen on the operator panel used in this manual are with the factory default settings. The descriptions in this manual may vary depending on your model. [ ] indi...

  • Page 10

    - 10 - 1. Before starting trademarks and other information oki is a registered trademark of oki electric industry co., ltd. Energy star is a trademark of the united states environmental protection agency. Microsoft, windows, windows server, windows vista and internet explorer are registered trademar...

  • Page 11

    - 11 - 1. Before starting • importer to the eu/authorised representative oki europe limited blays house wick road egham surrey, tw20 0hj united kingdom for all sales, support and general enquiries contact your local distributor. • environmental information.

  • Page 12

    - 12 - 1. Before starting license this product contains software developed by the heimdal project. Copyright (c) 1995 - 2008 kungliga tekniska högskolan (royal institute of technology, stockholm, sweden). All rights reserved. Redistribution and use in source and binary forms, with or without modific...

  • Page 13: Setting Up

    2 setting up installation requirements checking the accessories unpacking and installing the machine installing the optional equipment connecting a telephone line connecting the power code connecting a lan cable/usb cable loading paper in the tray checking the setting information setting up this mac...

  • Page 14

    - 14 - 2. Setting up installation requirements • installation environment • installation space install the machine in the following environment. Ambient temperature: 10°c to 32°c ambient humidity: 20% to 80% rh (relative humidity) maximum wet bulb temperature: 25°c • use care to prevent condensation...

  • Page 15

    - 15 - 2. Setting up install the machine on a flat surface that is wide enough to accommodate the legs of the machine. Allow for enough room around the machine as shown in the following figures. • top view • side view • do not install this machine directly on a thick rug or carpet. • do not install ...

  • Page 16

    - 16 - 2. Setting up • side view (when the additional tray unit is installed).

  • Page 17

    - 17 - 2. Setting up checking the accessories check that you have everything shown below. Be sure to use the supplied consumables first. If other consumables are used first, the life time may not be shown correctly or supplied consumables may not be applied. • main body • four image drums (black, cy...

  • Page 18

    - 18 - 2. Setting up unpacking and installing the machine this section describes how to unpack and install the machine. • use extra care when handling the image drum (the green cylinder), because it is fragile. • do not expose the image drum to direct sunlight or strong light (approximately 1,500 lu...

  • Page 19

    - 19 - 2. Setting up 5 press the button (a) and open the output tray (a) until it stops. 6 pinch the tip of blue lever of the toner cartridge and turn forward until the tip aligns on the lug of the cartridge. Turn the levers of all 4 toner cartridges. If you close the output tray without turning the...

  • Page 20

    - 20 - 2. Setting up 9 push the blue lever on the fuser unit and remove the orange safety stopper and film. 10 hold the fuser unit handle and aligning the fuser unit to the grooves behind the toner cartridges, place the fuser unit into the machine. 11 push the levers on the fuser unit to lock. 12 cl...

  • Page 21

    - 21 - 2. Setting up 13 hold the handle (b) to close the scanner unit..

  • Page 22

    - 22 - 2. Setting up installing the optional equipment this section describes how to install optional equipment. • installing the wireless lan module • installing the additional tray unit • setting the printer driver install the wireless lan module when you want to use a wireless connection. After i...

  • Page 23

    - 23 - 2. Setting up 3 eject the connector from the cover and connect with the wireless lan module. 4 install the wireless lan module to the machine. 5 close the wireless lan module cover. Go to "connecting the power code”. Attaching the wireless module cannot connect the machine to the wireless lan...

  • Page 24

    - 24 - 2. Setting up 2 if you want to install two additional trays, fix them together with the lock pieces. 3 slowly stack the machine on the additional tray unit aligning their back sides and right sides. 4 screw the machine and additional tray unit with the lock pieces..

  • Page 25

    - 25 - 2. Setting up when the additional tray unit is installed, be sure to set the number of trays after the printer driver is installed. For the information of installing the printer driver, see "installing a driver and software to a computer". • to follow this procedure, you must log in to a comp...

  • Page 26

    - 26 - 2. Setting up 4 select [get installed options automatically] for [installable options], and then click [setup]. When using a usb connection, select the total number of trays for [available trays] in [installable options]. 5 click [ok]. • setting additional tray(s) to the mac os x printer driv...

  • Page 27

    - 27 - 2. Setting up connecting a telephone line this section describes how to connect a telephone cable for fax transmissions. The telephone line connection method varies depending on your environment. Connect the telephone cable that suits your environment by referring to the illustrations in this...

  • Page 28

    - 28 - 2. Setting up 1 plug one end of the included telephone cable (a) into the line connector (b) of the machine and the other end into a public line (analog) (c). 2 remove the telephone connector cover (d). 3 plug the telephone cable (f) that is connected to the external telephone into the tel co...

  • Page 29

    - 29 - 2. Setting up • only one telephone can be connected to the machine. • do not connect the telephone to the machine in parallel. If you connect the telephone to the machine in parallel, the following problems occur, resulting in the machine not functioning correctly. - if you pick up the handse...

  • Page 30

    - 30 - 2. Setting up besides the included telephone cable, a telephone cable of the same type is needed. 1 plug one end of the included telephone cable (a) into the line connector (b) of the machine and the other end into a phone line splitter (e). If you use a phone-line-splitter-built-in type adsl...

  • Page 31

    - 31 - 2. Setting up 1 plug the included telephone cable (a) that is connected to the public line (analog) (c) into the line connector (b) of the machine. 2 plug the telephone cable (f) that is connected to a control device such as pbx (e) into the tel connector (d) of the machine. • home telephone ...

  • Page 32

    - 32 - 2. Setting up 1 plug the included telephone cable (a) that is connected to the public line (analog) (c) into the line connector (b) of the machine 2 remove the telephone connector cover. 3 plug the telephone cable (f) that is connected to the cs tuner or digital television (e) into the tel co...

  • Page 33

    - 33 - 2. Setting up connecting the power code the power supply must meet the following conditions. Ac: 110 to 127v ac (range 99 to 140v ac) / 220 to 240v ac (range 198 to 264v ac) frequency: 50/60 hz ± 2% • if the power supply is unstable, use a voltage regulator. • the maximum power consumption of...

  • Page 34

    - 34 - 2. Setting up 1 plug the power cord into the power connector. 2 plug the power cord into the outlet..

  • Page 35

    - 35 - 2. Setting up connecting a lan cable/usb cable when using the machine in a wired network connection or connecting to a computer via a usb cable, connect the cable in the following steps. • connecting a lan cable • connecting a usb cable a lan cable (category 5e or higher, twist pair, straight...

  • Page 36

    - 36 - 2. Setting up 4 insert one end of the lan cable into the network interface connector. 5 pass the lan cable under the tab, and then close the interface cover. 6 insert the other end of the lan cable into the hub. Go to the procedure to "loading paper in the tray"..

  • Page 37

    - 37 - 2. Setting up a usb cable (hi-speed usb 2.0) is not supplied. 1 prepare a usb cable. If you want to connect in usb 2.0 hi-speed mode, use a hi-speed usb 2.0 usb cable. 2 check that the machine and computer are turned off. 3 open the interface cover on the back side of the machine pressing the...

  • Page 38

    - 38 - 2. Setting up for windows, do not insert the other end of the usb cable into the computer until the instruction is displayed on the screen when the driver installation is in progress. Go to the procedure to "loading paper in the tray"..

  • Page 39

    - 39 - 2. Setting up loading paper in the tray the procedure when loading paper in tray 1 is used as an example. The same procedure applies to tray 2/3 (optional). For details on available paper, see "about paper types that can be loaded". 1 pull the paper cassette out. 2 slide the paper guide (a) t...

  • Page 40

    - 40 - 2. Setting up 7 replace the paper cassette into the machine. Push the paper cassette until it stops..

  • Page 41

    - 41 - 2. Setting up checking the setting information • fax setting to use the fax function, the following information is needed. • network setting to connect the machine to a network using a lan cable, the following information is needed. • e-mail setting to use functions which require sending and ...

  • Page 42

    - 42 - 2. Setting up setting up this machine the first time the machine is turned on or when the settings are initialized, set up the machine with the necessary information. The factory default display language is english and administration password is "999999". To change the display language and ad...

  • Page 43

    - 43 - 2. Setting up set the administrator password using from 6 to 12 alphanumeric characters. Be careful not to forget the set password. 1 press the (setting) button. 2 press the button to select [admin setup] and press the button. 3 enter the administrator password, and then press the (ok) button...

  • Page 44

    - 44 - 2. Setting up 12 to set up the fax function, press the button to select [2. Fax setting] and press the button. If you do not want to use the fax function, go to step 16. 13 check that [fax number] is displayed, and then press the button. Enter the fax number using the numeric keypad, and then...

  • Page 45

    - 45 - 2. Setting up connecting to a wireless lan • before connecting to a wireless lan • enabling wireless lan connection • connecting to an access point (infrastructure) • connecting to the machine directly • wireless(infrastructure) and wireless(ap mode) cannot be enabled at the same time. • if t...

  • Page 46

    - 46 - 2. Setting up • an ssid is also called a network name, essid or ess-id. • an encryption key is also called a network key, security key, password, or pre-shared key. Connecting to the machine directly you can use the machine as a wireless access point to directly connect wireless devices (comp...

  • Page 47

    - 47 - 2. Setting up • install this machine in a place with a good view and near a wireless access point. (we suggest that the distance between the machine and the wireless device be 30 m or less.) • if there is metal, aluminum sash, or a reinforced concrete wall between the machine and wireless lan...

  • Page 48

    - 48 - 2. Setting up • if the [connection failed. Timeout] message appears, repeat the procedure from step 8. • [overlap] is displayed when multiple wps push buttons are pressed almost at the same time at two or more wireless lan access points and connection is not established. Wait for a while, and...

  • Page 49

    - 49 - 2. Setting up • if the [wpa pre-shared key] message is displayed • if [wep key] is displayed • if neither of the above two cases is applied 15 if the displayed ssid is the same as the ssid that you checked in step 1, press [yes]. When "connection successful." is displayed, press [close]. If "...

  • Page 50

    - 50 - 2. Setting up 12 press the button repeatedly to select [wireless network selection] and press the (ok) button. The machine starts searching for wireless lan access points. Wait for a while. 13 press the button to select [manual setup], and then press the button. 14 check that the ssid entry s...

  • Page 51

    - 51 - 2. Setting up wireless lan (ap mode) directly connects wireless devices (computers, tablets, smartphones, etc.) to the machine without using a wireless lan access point. • up to four devices can be connected to the machine via the wireless lan (ap mode). • if there is metal, aluminum sash, or...

  • Page 52

    - 52 - 2. Setting up if the [do you want to set-up wireless?] message appears, press the button to select [no (do not show next time)], and then press the (ok) button. 2 press the (setting) button. 3 press the button once to select [admin setup] and press the button. 4 enter the administrator passwo...

  • Page 53

    - 53 - 2. Setting up installing a driver and software to a computer install the printer driver, scanner driver, fax driver, etc. From the "software dvd-rom" to the computer. Other utility software can be installed at the same time. • for windows • for mac os x connect the machine and computer via a ...

  • Page 54

    - 54 - 2. Setting up 6 select [network] or [usb connection] in accordance to the connection method of the machine and computer, and then click [next]. If the [windows security alert] dialog box is displayed, click [allow access]. 7 select the model name of the machine, and then click [next]. 8 click...

  • Page 55

    - 55 - 2. Setting up 10 click [complete] . 11 click [next]. If the following dialog box is displayed, click [yes]..

  • Page 56

    - 56 - 2. Setting up 12 click [exit]. This section describes how to install the ps printer driver and scanner driver. For installation of utilities, see the following. Installing software (advanced manual) • install the mac os x scanner driver. 1 make sure that the machine and a computer are connect...

  • Page 57

    - 57 - 2. Setting up 6 read the license agreement, and then click [continue]. 7 click [agree]. 8 click [install]. To change the driver installation location, click [change install location]. 9 enter the administrator name and password, and then click [install software]. 10 click [continue installati...

  • Page 58

    - 58 - 2. Setting up 8 click [+]. Select [add printer or scanner...] when the menu is displayed. 9 click [default]. 10 select the machine , and then make sure that [oki mc563 ps] is displayed for [use]. To change the name, enter a new name into [name:]. 11 click [add]. 12 if [installable options] is...

  • Page 59

    - 59 - 2. Setting up 13 make sure that the machine is added to [printers] and [oki mc563 ps] is displayed for [kind]. If [oki mc563 ps] is not displayed for [kind] correctly, click [-], delete the machine from [printers], and then newly perform steps 8 to 12. 14 click [open print queue...]. 15 selec...

  • Page 60: Basic Operations

    3 basic operations names of components basic operations on the operator panel turning the machine on or off loading paper setting a document this section describes basic operations of this machine..

  • Page 61

    - 61 - 3. Basic operations names of components the chapter describes the name of each component. • front view • rear view • inside of the machine front view symbol name a auto document feeder (adf) b document tray c scanner unit d operator panel basic operations on the operator panel e usb port f mp...

  • Page 62

    - 62 - 3. Basic operations symbol name j document glass k document glass cover l wireless lan module cover symbol name m output tray n tray 1 rear view symbol name a telephone connector (for connecting an external telephone) b line connector c rear output tray d power connector e interface connector...

  • Page 63

    - 63 - 3. Basic operations inside of the machine symbol name a led head b fuser unit c toner cartridge / image drum (y: yellow) d toner cartridge / image drum (m: magenta) e toner cartridge / image drum (c: cyan) f toner cartridge / image drum (k: black).

  • Page 64

    - 64 - 3. Basic operations basic operations on the operator panel this section describes the operator panel of the machine. • names and functions • name and functions on the operator panel • adjusting the angle of the display screen • entering characters this section describes the names and function...

  • Page 65

    - 65 - 3. Basic operations to access the keyboard, open the one-touch-button panel. Use to enter alphabetic characters. When this machine turns on, the home screen is displayed on the operator panel. • setting screen the screen below is used as an example. • when an error occurs if an error occurs i...

  • Page 66

    - 66 - 3. Basic operations the display screen can be tilted to improve the visibility. 1 hold the upper center of the display screen and pull it forward. • entering characters • deleting entered characters entering characters if the character entry is required while setting an item, the entry screen...

  • Page 67

    - 67 - 3. Basic operations 1 press the , , or button on the operator panel to select a character, and then press the (ok) button. Or press the keyboard for alphabetic characters or numeric keypad for numbers. 2 after entering all the characters, select [enter], and then press the (ok) button. Deleti...

  • Page 68

    - 68 - 3. Basic operations turning the machine on or off this section describes how to turn on and off the machine. • turning the machine on • turning the machine off 1 check that no documents are set on the document glass or in the adf, and the adf cover is closed. 2 press the power switch for appr...

  • Page 69

    - 69 - 3. Basic operations • check that the machine is not receiving data before shutting down. • press and hold the power switch for 5 seconds or more to force shut down the machine. Use this method only if a problem occurs. For troubleshooting of this machine, see "troubleshooting". 1 press the po...

  • Page 70

    - 70 - 3. Basic operations loading paper this chapter describes various information about paper that can be loaded in a paper tray of this machine. To set paper type and weight, press the (setting) button on the operator panel > [paper setup] and press the tray you want to use, and then select [medi...

  • Page 71

    - 71 - 3. Basic operations • envelope • label • other type of paper about paper sizes, weight, and number of sheets that can be loaded available paper sizes and types, and tray capacity are as follows. • tray 1 *1 paper cannot be used for duplex printing. *2 width: 100 to 216 mm (3.9 to 8.5 inches),...

  • Page 72

    - 72 - 3. Basic operations • mp tray *1 paper cannot be used for duplex printing. *2 width: 64 to 216 mm (2.5 to 8.5 inches), length: 90 to 1,321 mm (3.5 to 52 inches) recommended paper the machine supports a variety of print media, including a range of paper weights and sizes. This section describe...

  • Page 73

    - 73 - 3. Basic operations the procedure when loading paper in tray 1 is used as an example, and the same procedure applies to tray 2/3 (optional). 1 pull the paper cassette out. 2 slide the paper guide (a) to the width of paper to be loaded. 3 slide the paper stopper (b) to the length of paper to b...

  • Page 74

    - 74 - 3. Basic operations 7 push the paper cassette until it stops. 8 press the (setting) button on the operator panel. 9 press [paper setup]. 10 press the tray in which paper is loaded. 11 set [paper size], [media type], and [media weight]. 12 press [back] until the home screen is displayed. • do ...

  • Page 75

    - 75 - 3. Basic operations 3 open the sub support. 4 adjust the manual feeding paper guide to the width of paper to be loaded. 5 make sure that the paper feed roller stays in the proper position. If the paper feed roller has fallen, push it upward and fix it. 6 insert the paper with the print side u...

  • Page 76

    - 76 - 3. Basic operations store paper under the following conditions to maintain quality. • inside a cabinet or other dry and dark place • on a flat surface • temperature: 20°c • humidity: 50% rh (relative humidity) do not store paper in the places as shown below: • directly on the floor • where pa...

  • Page 77

    - 77 - 3. Basic operations setting a document this chapter describes how to set the document on this machine. • about documents that can be set • setting in the adf • setting on the document glass • about where to set a document set a document in the adf or on the document glass when copying, scanni...

  • Page 78

    - 78 - 3. Basic operations • documents still wet with ink or correction fluid observe the following to avoid damaging the document glass. • when copying a thick document, do not press on it on the document glass. • place a hard document gently. • do not set a document that has sharp protrusions. • a...

  • Page 79

    - 79 - 3. Basic operations 3 close the adf cover. 4 set a document face up in the adf. If [direction] is set to [landscape], set the document so that its left edge is pulled into the adf first. If [direction] is set to [portrait], set the document so that its top edge is pulled into the adf first. 5...

  • Page 80

    - 80 - 3. Basic operations 1 open the document glass cover. 2 set a document face down on the document glass. If [direction] is set to [portrait], align the top edge of the document with the upper-left corner of the glass. If [direction] is set to [landscape], align the right edge of the document wi...

  • Page 81: Copy

    4 copy copying cancelling copying specifying the number of copies.

  • Page 82

    - 82 - 4. Copy copying 1 press the (copy) button on the operator panel. 2 set a document in the adf or on the document glass. 3 set the copy setting if necessary. Useful functions (advanced manual) for a better finish (advanced manual) color settings (advanced manual) advanced copy settings (advance...

  • Page 83

    - 83 - 4. Copy cancelling copying you can cancel copying before a message is displayed to inform you that copying is complete. 1 press the (stop) button when scanning the document..

  • Page 84

    - 84 - 4. Copy specifying the number of copies 1 press the (copy) button on the operator panel. 2 set a document in the adf or on the document glass. 3 enter the number of copies by using the numeric buttons. • you can enter the number of copies from 1 to 99. • if you enter an incorrect value, press...

  • Page 85: Scan

    5 scan sending scanned data as an e-mail attachment saving scanned data in a shared folder cancelling scanning.

  • Page 86

    - 86 - 5. Scan sending scanned data as an e-mail attachment this section describes how to send scanned data as an e-mail attachment. • before using scan to e-mail • entering e-mail address to send e-mail if the machine is set up from [easy setup] > [e-mail setting], skip before using scan to e- mail...

  • Page 87

    - 87 - 5. Scan 1 press the (scan) button on the operator panel. 2 set a document in the adf or on the document glass. 3 check that [e-mail] is selected, and then press the (ok) button. 4 check that [add destination] is selected, and then press the (ok) button. 5 check that [to] is selected, and then...

  • Page 88

    - 88 - 5. Scan saving scanned data in a shared folder this section describes how to save scanned data in a shared folder on a network. • creating a shared folder in a computer • registering a destination (profile) • how to use scan to shared folder if you create a shared folder in the following step...

  • Page 89

    - 89 - 5. Scan create a shared folder and register to the machine as a destination. Up to 50 profiles can be registered. 1 press the (setting) button on the operator panel. 2 press the button to select [profile], and then press the (ok) button. 3 press the button to select a profile number you want ...

  • Page 90

    - 90 - 5. Scan scanned data is converted into a pdf, jpeg, tiff, or xps file, and then sent to the shared folder. Pdf is set by factory default. Connect the machine to a network and create a shared folder on the computer before using the scan to shared folder function. Connecting a lan cable/usb cab...

  • Page 91

    - 91 - 5. Scan cancelling scanning you can cancel scanning while a message is being displayed to inform you that scanning is in progress. 1 press the (stop) button on the operator panel..

  • Page 92: Print

    6 print printing from a computer (windows) printing from a computer (mac os x) cancelling a print job about screens and functions of each printer driver.

  • Page 93

    - 93 - 6. Print printing from a computer (windows) • for windows pcl printer driver • for windows ps printer driver 1 open the file to print. 2 select [print] from the [file] menu. 3 select the printer driver. 4 click [preferences]. For windows pcl printer driver.

  • Page 94

    - 94 - 6. Print 5 change the settings in each tab to suit your needs. 6 click [ok]. 7 click [print] on the [print] screen. 1 open the file to print. 2 select [print] from the [file] menu. 3 select the ps printer driver. 4 click [preferences]. For windows ps printer driver.

  • Page 95

    - 95 - 6. Print 5 change the settings in each tab to suit your needs. 6 click [ok]. 7 click [print] on the [print] screen..

  • Page 96

    - 96 - 6. Print printing from a computer (mac os x) • for mac os x you can set a paper size, paper tray, and paper weight, and paper type with the printer driver. 1 open the file to print. 2 select [print] from the [file] menu. 3 select the machine from [printer]. 4 select the paper size from [paper...

  • Page 97

    - 97 - 6. Print if setting details are not displayed in the print dialog box for mac os x10.8.5 to 10.11, click [show details] at the bottom of the dialog box. 6 click [print]..

  • Page 98

    - 98 - 6. Print cancelling a print job to cancel printing an ongoing job, press (stop) on the operator panel. You can cancel a print job by deleting the job in the job list displayed on the operator panel. • the pages that are ready to be printed on this machine cannot be cancelled. • if the operato...

  • Page 99

    - 99 - 6. Print about screens and functions of each printer driver this section describes screens and functions of the printer drivers. • windows pcl printer driver • windows ps printer driver • mac os x ps printer driver • [setup] tab windows pcl printer driver item description 1 driver setting sav...

  • Page 100

    - 100 - 6. Print • [job options] tab • [extend] tab item description 1 quality specifies the resolution for printing. 2 scale specifies the enlargement/reduction rate for printing. 3 copies specifies the number of copies to print. 4 job type specifies the print type. 5 advanced sets other printing s...

  • Page 101

    - 101 - 6. Print • [layout] tab • [paper/quality] tab windows ps printer driver item description 1 orientation specifies the printing direction. 2 print on both sides specifies this setting when you want to perform duplex printing. 3 page order specifies a page order to print. 4 page format specifie...

  • Page 102

    - 102 - 6. Print • [job options] tab • [color] tab item description 1 quality specifies the resolution for printing. If you set [toner saving], the print density decreases to save toner. 2 job type specifies the job type and the number of copies to print. [job type option] can be used if [shared pri...

  • Page 103

    - 103 - 6. Print • [layout] panel • [color matching] panel • [paper handling] panel mac os x ps printer driver item description 1 pages per sheet selects the number of pages that is printed on a sheet of paper. 2 layout direction specifies the layout that is applied when printing multiple pages on a...

  • Page 104

    - 104 - 6. Print • [paper feed] panel • [cover page] panel 2 pages to print specifies pages to print. 3 page order specifies a page order to print. 4 scale to fit paper size prints to fit a paper size. A document may not be printed correctly depending on the setting. Enlarges or reduces a document t...

  • Page 105

    - 105 - 6. Print • [color] panel • [print options] panel item description 1 grayscale specifies to use monochrome printing. 2 color specifies alignment to color mode when printing in color. Item description 1 quality1, quality2, feed, paper specifies the print quality, toner saving, paper type, etc..

  • Page 106

    - 106 - 6. Print • [user authentication] panel • [secure print] panel item description 1 use user authentication select this check box if you set user authentication when printing. 2 user name the user name for user authentication. 3 password the password for user authentication. 4 authentication ty...

  • Page 107

    - 107 - 6. Print • [supply levels] panel item description 1 consumables displays the remaining amount of consumables..

  • Page 108: Fax

    7 fax basic operations of fax functions setting for receptions.

  • Page 109

    - 109 - 7. Fax basic operations of fax functions this section describes basic operations when sending and receiving a fax. • entering fax number to send a fax • cancelling a fax transmission 1 press the (fax) button on the operator panel. 2 set a document in the adf or on the document glass. 3 check...

  • Page 110

    - 110 - 7. Fax • cancelling during a transmission • cancelling a reserved transmission cancelling during a transmission you can cancel a fax transmission when a message is displayed and scanning is in progress. 1 press the (stop) button. Cancelling a reserved transmission if you select broadcast, th...

  • Page 111

    - 111 - 7. Fax setting for receptions this section describes various settings when receiving a fax. • setting the reception mode • drd • setting the waiting time from when an incoming call arrives to when reception starts (response waiting time) [fax ready mode] is set by factory default. Change the...

  • Page 112

    - 112 - 7. Fax the factory default administrator name and password are "admin" and "999999" respectively. 5 select [enter], and then press the (ok) button. 6 press the button to select [user install], and then press the (ok) button. 7 press the button to select [reception mode], and then press the (...

  • Page 113

    - 113 - 7. Fax the factory default value is 1 ring. Change the value if faxes cannot be received. 1 press the (setting) button on the operator panel. 2 press the button to select [admin setup] and press the (ok) button. 3 enter the administrator password. The factory default administrator name and p...

  • Page 114: Maintenance

    8 maintenance replacing consumables cleaning each part of the machine this section describes how to maintain the machine to keep the machine comfortable and extend its life..

  • Page 115

    - 115 - 8. Maintenance replacing consumables this section describes how to replace consumables. • cautions when replacing consumables • replacing the toner cartridges • replacing the image drum • replacing the image drum and toner cartridge at the same time observe the following cautions when replac...

  • Page 116

    - 116 - 8. Maintenance • use oki data genuine consumables to ensure optimum performance of the products. • charges for services for problems caused by the use of consumables other than oki data genuine consumables are incurred, regardless of the warranty or in the maintenance contract. (although the...

  • Page 117

    - 117 - 8. Maintenance 3 press the button (a) and open the output tray (b) completely. 4 identify an empty toner cartridge by its label color. 5 pinch the tip of blue lever (c) of the toner cartridge and turn it toward you until the tip aligns on the lug of the cartridge. 6 lift the toner cartridge ...

  • Page 118

    - 118 - 8. Maintenance 8 shake the cartridge several times vertically and horizontally. 9 remove the tape (e) from the toner cartridge. 10 insert a new toner cartridge (d) by aligning its left side indentation (f) with the protrusion (g) on the image drum so the toner cartridge and image drum color ...

  • Page 119

    - 119 - 8. Maintenance 11 hold the cartridge, pinch the tip of blue lever (c) of the toner cartridge, and turn forward until the tip aligns on the lug of the cartridge. • if you close the output tray without turning the blue lever when installing the toner cartridge into the image drum, it may cause...

  • Page 120

    - 120 - 8. Maintenance do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. 15 please recycle toner cartridges. If you have to dispose of us...

  • Page 121

    - 121 - 8. Maintenance you can set when to display the "[color] image drum near life" message. Press the (setting) button > [admin setup] > [user install] > [drum near life timing] on the operator panel to change the setting. Available values are from 500 to 3,000 (in 500 increments). 1 prepare new ...

  • Page 122

    - 122 - 8. Maintenance 7 lift the toner cartridge (e) from the right side, and remove it from the image drum. 8 unpack a new image drum and place it on a flat surface. 9 remove the desiccant pack. 10 remove the toner cover. 11 insert the toner cartridge (e) removed in step 7 by aligning its left sid...

  • Page 123

    - 123 - 8. Maintenance 13 check the label color of the new image drum and place the drum into the machine. 14 close the output tray (b) slowly and push the center of the output tray for confirmation. 15 hold the handle (b) to close the scanner unit (a). Do not close the scanner unit vigorously. It m...

  • Page 124

    - 124 - 8. Maintenance this section describes how to replace the image drum and toner cartridge with new ones at the same time. • use extra care when handling the image drum (the green cylinder), because it is fragile. • do not expose the image drum to direct sunlight or strong light (approximately ...

  • Page 125

    - 125 - 8. Maintenance while removing consumables, be careful not to hit them to the led head. 6 unpack a new image drum and place it on the flat surface. 7 remove the desiccant pack. 8 remove the toner cover. 9 unpack a new toner cartridge. 10 shake the cartridge several times vertically and horizo...

  • Page 126

    - 126 - 8. Maintenance 12 insert a new toner cartridge (e) by aligning its left side indentation (f) with the protrusion (g) on the image drum so that the toner cartridge and image drum color label align. Then insert the right side gently into place. For the installation method, refer to "replacing ...

  • Page 127

    - 127 - 8. Maintenance do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. 17 please recycle image drums and toner cartridges. If you must ...

  • Page 128

    - 128 - 8. Maintenance cleaning each part of the machine this section describes how to clean the machine and parts. • cleaning the document glass • cleaning the led head clean the document glass once a month to maintain image quality of the printouts. Do not use benzine, thinners, or alcohol. They m...

  • Page 129

    - 129 - 8. Maintenance if the document glass surface and document holding pad are very dirty, wipe gently with a soft cloth that has been moistened with neutral detergent and squeezed well, and then wipe again with a soft cloth that has been slightly moistened with water and squeezed well. 3 close t...

  • Page 130

    - 130 - 8. Maintenance 2 press the button (a) and open the output tray (b) completely. 3 wipe the four lenses of the led heads with a soft tissue paper lightly. 4 close the output tray (b) slowly and push the center of the output tray for confirmation. 5 hold the handle (b) to close the scanner unit...

  • Page 131: Troubleshooting

    9 troubleshooting if paper jams occur if a document jam occurs copy problems print problems scan problems fax problems if an error message is displayed on the operator panel.

  • Page 132

    - 132 - 9. Troubleshooting if paper jams occur this section describes how to handle when a paper jam occurs. Check the error code on the operator panel and see the corresponding page. • if the error code is "370", "371", "372" • if the error code is "380", "381", "382", "385", "389" • if the error c...

  • Page 133

    - 133 - 9. Troubleshooting 3 press the button (a) and open the output tray (b) completely. 4 remove the four image drums from the machine and place the image drums on a flat surface. While removing consumables, be careful not to hit them to the led head. 5 cover the removed image drums with paper so...

  • Page 134

    - 134 - 9. Troubleshooting 7 if paper jams in the fuser unit, press the jam release lever (c) on the fuser unit and slowly pull the jammed paper toward you. 8 tilt back the lock levers (d) on the both sides of the fuser unit toward you. 9 hold the fuser unit handle and lift the fuser unit out of the...

  • Page 135

    - 135 - 9. Troubleshooting 10 turn the lock levers (e) on the both sides of the belt unit toward you and remove the belt unit by holding the lock levers. 11 remove the jammed paper slowly by pulling the edge of paper. 12 hold the lock levers of belt unit and place the belt unit into the machine. 13 ...

  • Page 136

    - 136 - 9. Troubleshooting 14 hold the fuser unit handle and place the fuser unit into the machine. 15 tilt the lock levers (c) on the both sides of the fuser unit. 16 replace the four image drums into the machine 17 close the output tray (b) slowly and push the center of the output tray for confirm...

  • Page 137

    - 137 - 9. Troubleshooting do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. 1 if documents are set in the adf or on the document glass, ...

  • Page 138

    - 138 - 9. Troubleshooting 3 press the button (a) and open the output tray (b) completely. 4 remove the four image drums from the machine and place the image drums on a flat surface. While removing consumables, be careful not to hit them to the led head. 5 cover the removed image drums with paper so...

  • Page 139

    - 139 - 9. Troubleshooting 7 if paper jams in the fuser unit, press the jam release lever (c) on the fuser unit and slowly pull the jammed paper toward you. 8 tilt back the lock levers (d) on the both sides of the fuser unit toward you. 9 hold the fuser unit handle and lift the fuser unit out of the...

  • Page 140

    - 140 - 9. Troubleshooting 11 hold the fuser unit handle and place the fuser unit into the machine. 12 tilt the lock levers (d) on the both sides of the fuser unit. 13 put all four image drums back into the machine. 14 close the output tray (b) slowly and push the center of the output tray for confi...

  • Page 141

    - 141 - 9. Troubleshooting do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. 1 if documents are set in the adf or on the document glass, ...

  • Page 142

    - 142 - 9. Troubleshooting 3 hold the handle (b) and open the scanner unit (a) completely. 4 press the button (a) and open the output tray (b) completely. While removing consumables, be careful not to hit them to the led head. 5 remove the four image drums from the machine and place the image drums ...

  • Page 143

    - 143 - 9. Troubleshooting 7 open the transparent cover (c) inside the machine, remove the jammed paper slowly by pulling the edge of paper. 8 put all four image drums back into the machine. 9 close the output tray (b) slowly and push the center of the output tray for confirmation. 10 when loading p...

  • Page 144

    - 144 - 9. Troubleshooting do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. A paper jam has occurred while feeding paper from a paper tr...

  • Page 145

    - 145 - 9. Troubleshooting if jammed paper cannot be found, check the positions of the paper guides and paper stopper in the cassette and ensure that paper is correctly loaded. 3 replace the paper cassette into the machine. 4 hold the handle (b) and open the scanner unit (a) completely. 5 press the ...

  • Page 146

    - 146 - 9. Troubleshooting 7 hold the handle (b) and close the scanner unit (a). Do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover. Openin...

  • Page 147

    - 147 - 9. Troubleshooting 3 press the button (a) and open the output tray (d) completely. 4 remove the four image drums from the machine and place the image drums on a flat surface. While removing consumables, be careful not to hit them to the led head. 5 cover the removed image drums with paper so...

  • Page 148

    - 148 - 9. Troubleshooting 7 if paper jams in the fuser unit, press the jam release lever (e) on the fuser unit and slowly pull the jammed paper toward you. 8 tilt the lock levers (f) on the both sides of the fuser unit toward you. 9 hold the fuser unit handle and lift the fuser unit out of the mach...

  • Page 149

    - 149 - 9. Troubleshooting 10 turn the lock levers (g) on the both sides of the belt unit toward you and remove the belt unit by holding the lock levers. 11 remove the jammed paper slowly by pulling the edge of paper. 12 hold the lock levers of belt unit and place the belt unit into the machine. 13 ...

  • Page 150

    - 150 - 9. Troubleshooting 14 hold the fuser unit handle and place the fuser unit into the machine. 15 tilt the lock levers (f) on the both sides of the fuser unit. 16 put all four image drums back into the machine. 17 close the output tray (b) slowly and push the center of the output tray for confi...

  • Page 151

    - 151 - 9. Troubleshooting do not close the scanner unit vigorously. It may cause the document feed roller of adf to fall and get in the way of loading documents. If the document feed roller of adf has fallen, open and close the adf cover..

  • Page 152

    - 152 - 9. Troubleshooting if a document jam occurs this section describes how to handle when a document jam occurs. • if a document is visible in the paper path • if a document is invisible in the paper path 1 open the adf cover (a). 2 pull out the document upward. Sticky notes and labels attached ...

  • Page 153

    - 153 - 9. Troubleshooting 1 open the adf cover (a). 2 remove the jammed document. Proceed to step 4 if you cannot remove the jammed document. Do not try to remove the document by force. 3 if you were able to remove the document, proceed to step 8. 4 open the inner cover (b). 5 if you can see the ed...

  • Page 154

    - 154 - 9. Troubleshooting 6 if the edge of document jammed under the document tray (c) can be seen, lift up the document tray and gently pull out the document to remove. 7 if you were able to remove the document, close the inner cover. 8 close the adf cover slowly. Remove the document on the docume...

  • Page 155

    - 155 - 9. Troubleshooting copy problems this section describes problems with the copy function. If you cannot solve a problem with the following solutions, contact your dealer. • unable to copy • unable to copy unable to copy point to check solution reference is the machine turned on? Turn the mach...

  • Page 156

    - 156 - 9. Troubleshooting • unable to change copy ratios • unable to copy mixed size documents • unable to sort copies is another job in progress? Start copying after the other job is complete. - is a print job from a computer or other device in progress? Wait until printing is complete. - is a fax...

  • Page 157

    - 157 - 9. Troubleshooting print problems this section describes problems with printing from a computer. • if you cannot solve a problem with the following solutions, contact your dealer. • for problems caused by an application, contact the manufacturer of the application. • unable to print • common...

  • Page 158

    - 158 - 9. Troubleshooting the output port of the printer driver is incorrect. Select the output port for connecting the lan cable or usb cable. - the machine is processing data from another interface. Wait until printing is complete. - [received invalid data] is displayed on the operator panel and ...

  • Page 159

    - 159 - 9. Troubleshooting scan problems this section describes problems with the scan function. If you cannot solve a problem with the following solutions, contact your dealer. • unable to scan unable to scan point to check solution reference is the machine turned off? Turn the machine on. Turning ...

  • Page 160

    - 160 - 9. Troubleshooting fax problems this section describes problems with the fax function. If you cannot solve a problem with the following solutions, contact your dealer. • unable to send a fax • unable to receive a fax • unable to send a fax • a document cannot be sent continuously unable to s...

  • Page 161

    - 161 - 9. Troubleshooting • after dialing, even if the (mono) button is pressed, the machine cannot send a fax • unable to send a fax manually • a document cannot be scanned during memory transmission • unable to receive a fax • unable to receive a fax manually • fcode polling reception is not avai...

  • Page 162

    - 162 - 9. Troubleshooting if an error message is displayed on the operator panel if an error occurs in this machine, an error message and/or an error code (a 3-digit number) is displayed on the operator panel and (status) on the operator panel blinks or lights up. • error message list error message...

  • Page 163

    - 163 - 9. Troubleshooting wait a moment. Executing maintenance. The programs on the machine are being updated. Do not turn the machine off until the update completes. The machine automatically restarts after the update completes. Toner low. The toner indicated on the screen is low. Have a new toner...

  • Page 164

    - 164 - 9. Troubleshooting [tray] empty. No paper is loaded in the indicated tray. Load paper. File system is full. Memory in the file system is full. Delete unnecessary files. File system is write protected. The file system is write-protected. Contact the administrator of the mfp. Memory overflow i...

  • Page 165

    - 165 - 9. Troubleshooting wait a moment. Network configuration writing ... Network settings for this machine is changed. The new settings are being stored. Wait for a while. Wait a moment. Network initializing ... Network settings for this machine are initializing. Wait for a while. Please install ...

  • Page 166

    - 166 - 9. Troubleshooting paper jam: 391, 392, 393 please open the scanner unit and the output tray. A paper jammed via the paper feed path from the indicated tray. Pull out the cassette, and then remove paper. If multiple sheets of paper are fed at a time, remove paper and reload paper. Make sure ...

  • Page 167

    - 167 - 9. Troubleshooting please check the output tray.: 310 indicated cover is open. Close the cover. Error: 310 the output tray. Power off/on turn the machine off, and then back on. If the same error occurs, contact your dealer. Inspection is required. Turn the machine off, and then back on. If t...

  • Page 168

    - 168 - 9. Troubleshooting smtp auth. Unsupported the smtp server does not support the authentication system. Check the network settings. Pop3 login failed. An attempt to log into the pop3 server ended up an authentication error. Check the network settings. Getting target ip failed. Please check dhc...

  • Page 169

    - 169 - 9. Troubleshooting please remove the connected usb device. Unsupported usb device is connected. An unsupported usb device is connected. Remove the usb device. Please remove the connected usb device. Usb device has not been recognized. The connected usb device was not recognized. Remove the u...

  • Page 170

    - 170 - 9. Troubleshooting toner empty the indicated cartridge ran out of toner. Replace the empty toner cartridge with a new one. Wait timeout is disabled. If your printer is connected to usb port, it may become unable to print a job without via the usb port. Wait timeout is disabled. Memory overfl...

  • Page 171

    - 171 - 9. Troubleshooting duplex print error. Duplex printing is not available on the specified paper. Check the size and thickness of paper. Press [close]. Changing language. Panel operation is disabled. Display language is being changed. Wait for a while. Language change failed. Error num: [code]...

  • Page 172

    10 operating management/specifications changing the administrator password saving power consumption with the power save function specifications this section describes how to manage the machine and its specifications..

  • Page 173

    - 173 - 10. Operating management/specifications changing the administrator password it is recommended to change the administrator password to protect your security. Set the administrator password using from 6 to 12 alphanumeric characters. Be careful not to forget the set password. 1 press the (sett...

  • Page 174

    - 174 - 10. Operating management/specifications saving power consumption with the power save function the machine has three power save modes: power save, sleep, and deep sleep. In power save mode, the display screen turns off and the power saving indicator lights up or blinks. Press the (power save)...

  • Page 175

    - 175 - 10. Operating management/specifications 1 press the (setting) button on the operator panel. 2 press the button to select [admin setup] and press the (ok) button. 3 enter the administrator password. The factory default administrator name and password are "admin" and "999999" respectively. 4 s...

  • Page 176

    - 176 - 10. Operating management/specifications in a network environment where a large number of packets are sent, the machine automatically exits deep sleep mode to sleep mode and responds. Also, if a terminal that runs searches with bonjour, such as mac or iphone, is connected to the same network,...

  • Page 177

    - 177 - 10. Operating management/specifications 7 press [auto power off]. 8 select the value. 1 press the (setting) button on the operator panel. 2 press the button to select [admin setup] and press the (ok) button. 3 enter the administrator password. The factory default administrator name and passw...

  • Page 178

    - 178 - 10. Operating management/specifications specifications this section describes the specifications of the machine. • general specifications • copier specifications • fax specifications • scanner specifications • printing specifications • network specifications • wireless lan specifications (op...

  • Page 179

    - 179 - 10. Operating management/specifications copier specifications item mc563/es5463 mfp document size adf a4, a5, a6, b5, b6, letter, legal 13/13.5/14, executive, statement, 8.5 sq, folio document glass a4, a5, a6, b5, b6, b6 half, letter, executive, statement, 8.5 sq, 16k (197 x 273 mm, 195 x 2...

  • Page 180

    - 180 - 10. Operating management/specifications scanner specifications item mc563/es5463 mfp type document glass with adf function image sensor color cis light source led scanning resolution 600 × 600 dpi, 300 × 600 dpi document thickness adf 64 - 105 g/m 2 (17 - 28 lb) document glass 20 mm adf docu...

  • Page 181

    - 181 - 10. Operating management/specifications paper loading capacity • tray 1 250 sheets (less than 80 g/m 2 ), total thickness 25 mm or lower. • mp tray 100 sheets (less than 80 g/m 2 ) and total thickness 10 mm or lower, 10 envelopes (85 g/m 2 ). • additional tray unit (optional) 530 sheets of s...

  • Page 182

    - 182 - 10. Operating management/specifications regulatory wireless lan statements - fcc statement - ic statement - europe-ce declaration of conformity. Fcc statement fcc warning changes or modifications not expressly approved by the party responsible for compliance could void the user's authority t...

  • Page 183

    Menu list - 1/15 menu list reports ———————— ┬ configuration ├ system │ ├ file list │ ├ demo page │ ├ error log │ ├ scan to log │ ├ usage report │ ├ network information │ ├ supplies report │ └ job log ├ fax │ ├ speed dial list │ ├ group list │ ├ fax tx log │ ├ fax rx log │ ├ fax tx/rx log │ ├ daily t...

  • Page 184

    Menu list - 2/15 paper setup —————— ┬ tray1 │ ├ paper size (a4) │ ├ media type (plain) │ └ media weight (medium) ├ tray2* │ ├ paper size (a4) │ ├ media type (plain) │ └ media weight (medium) ├ tray3* │ ├ paper size (a4) │ ├ media type (plain) │ └ media weight (medium) ├ mp tray │ ├ paper size (a4) │...

  • Page 185

    Menu list - 3/15 phone book —————— ┬ speed dial │ ├ edit/register │ │ ├ name │ │ ├ fax number │ │ └ group no. │ ├ delete │ ├ sort by name │ ├ sort by number │ └ search └ group no. ├ edit/register │ ├ name │ └ speed dial ├ delete ├ sort by name ├ sort by number └ search profile ———————— ┬ edit/regist...

  • Page 186

    Menu list - 4/15 network scan destination ┬ edit/register │ ├ destination │ ├ destination address │ └ port no. ├ delete ├ sort by name ├ sort by number └ search store document settings ┬ store │ └ fcode bulletin board ├ delete │ └ fcode bulletin board └ print ├ fcode box └ received documents view in...

  • Page 187

    Menu list - 5/15 easy setup —————— ┬ 1. Date/time setting │ ├ time zone │ ├ daylight saving │ └ day and time │ ├ server │ │ ├ sntp server (primary) │ │ └ sntp server (secondary) │ └ manual │ ├ date │ └ time ├ 2. Fax setting │ ├ fax number │ └ sender id ├ 3. Network setting │ ├ auto │ └ manual │ ├ ip...

  • Page 188

    Menu list - 6/15 admin setup ————— ┬ copy setup │ └ default settings │ ├ scan size (a4) │ ├ duplex copy (off(simplex)) │ ├ zoom (100%) │ ├ sort (on) │ ├ image settings │ │ ├ density (0) │ │ ├ document type (text&photo) │ │ ├ resolution (normal) │ │ ├ background removal (auto) │ │ ├ show-through remo...

  • Page 189

    Menu list - 7/15 │ │ ├ rx reduc. Rate (auto) │ │ ├ reduc. Margin (24 mm) │ │ ├ ecm mode (on) │ │ ├ prefix │ │ ├ received time stamp (off) │ │ ├ print check message (on) │ │ ├ duplex (off) │ │ └ distant station priority (type1) │ └ fax setting │ ├ service bit (off) │ ├ country code (lnternational) │ ...

  • Page 190

    Menu list - 8/15 │ │ │ └ rgb │ │ │ ├ red (0) │ │ │ ├ green (0) │ │ │ └ blue (0) │ │ ├ continuous scan (off) │ │ ├ grayscale (off) │ │ ├ file format │ │ │ ├ color (multi-pdf) │ │ │ ├ mono (grayscale) (multi-pdf) │ │ │ └ mono (binary) (multi-pdf) │ │ ├ encrypted pdf setting │ │ │ ├ document open passw...

  • Page 191

    Menu list - 9/15 ├ print setup │ ├ print menu │ │ ├ print setup │ │ │ ├ copies (1 set) │ │ │ ├ duplex (off) │ │ │ ├ media check (enable) │ │ │ ├ override a4/letter (yes) │ │ │ ├ resolution (600dpi) │ │ │ ├ toner save level (off) │ │ │ ├ mono-print mode (auto) │ │ │ ├ orientation (portrait) │ │ │ ├ e...

  • Page 192

    Menu list - 10/15 │ ├ color menu │ │ ├ density control (auto) │ │ ├ adjust density │ │ ├ color tuning/print pattern │ │ ├ cyan tuning │ │ │ ├ cyan highlight (0) │ │ │ ├ cyan mid-tone (0) │ │ │ └ cyan dark (0) │ │ ├ magenta tuning │ │ │ ├ magenta highlight (0) │ │ │ ├ magenta mid-tone (0) │ │ │ └ mag...

  • Page 193

    Menu list - 11/15 │ ├ xps setup │ │ ├ digitalsignature (off) │ │ ├ discardcontrol (auto) │ │ ├ mc mode (on) │ │ ├ unzip mode (speed) │ │ └ white page skip (off) │ ├ sidm setup │ │ ├ sidm manual id# (2) │ │ ├ sidm manual2 id# (3) │ │ ├ sidm mp tray id# (4) │ │ ├ sidm tray1 id# (1) │ │ ├ sidm tray2 id...

  • Page 194

    Menu list - 12/15 │ │ │ ├ dhcpv6 (disable) │ │ │ ├ dns server (primary) (0.0.0.0) │ │ │ ├ dns server (secondary) (0.0.0.0) │ │ │ ├ wins server (primary) (0.0.0.0) │ │ │ ├ wins server (secondary) (0.0.0.0) │ │ │ ├ proxy (disable) │ │ │ ├ proxy server │ │ │ ├ proxy server port no. (8080) │ │ │ ├ proxy...

  • Page 195

    Menu list - 13/15 │ │ │ ├ e-mail address (mail) │ │ │ └ additional filter │ │ ├ authentication │ │ │ ├ method (anonymous) │ │ │ ├ userid │ │ │ └ password │ │ └ encryption (none) │ └ secure protocol server setting │ └ domain ├ manage unit │ ├ default mode (copy) │ ├ operation clear │ │ ├ operation ti...

  • Page 196

    Menu list - 14/15 │ └ print statistics │ ├ maintenance counter (disable) │ ├ reset main counter │ └ reset supplies counter └ user install ├ time zone (+00:00) ├ set daylight saving (off) ├ time setup (02/01/2000 00:00) │ ├ auto setup │ │ ├ sntp server (primary) │ │ └ sntp server (secondary) │ └ manu...

  • Page 197

    Menu list - 15/15 status menu —————— ┬ system status └ device information ├ job lists ├ fax job view/cancel ├ supplies status │ ├ black drum (100%) │ ├ cyan drum (100%) │ ├ magenta drum (100%) │ ├ yellow drum (100%) │ ├ belt (100%) │ ├ fuser (100%) │ ├ k toner(7.0k) (100%) │ ├ c toner(6.0k) (100%) │...

  • Page 198

    Oki systems (uk) ltd. Blays house wick road egham surrey tw20 0hj tel: +44 (0) 1784 274300 website: www.Oki.Com/uk oki systems (ireland) ltd a7 calmount park ballymount dublin 12 d12 tx94 ireland tel: +353 (0) 1 4049590 fax: +353 (0)1 4049591 website: www.Oki.Com/ie oki systems (czech and slo- vak),...

  • Page 199

    46590302ee rev 2.