1. DL manuals
  2. Oki
  3. All in One Printer
  4. ES7170dnf
  5. Basic Manual

Oki ES7170dnf Basic Manual

Summary of ES7170dnf

  • Page 1

    This manual contains cautions on how to use this product safety. Before you use this product, please make sure that you read this manual. User’s manual basic guide.

  • Page 2: About The Manuals

    - 2 - this manual supports the following models. Mb760dnfax, mb770dn, mb770dnfax, mb770dfnfax, es7170dn mfp, es7170dfn mfp, mb760, mb770, mb770f, mps5502mb, mps5502mbf ● about the manuals the following user manuals are included with this product. An electronic manual is included in the software dvd-...

  • Page 3: Topaccess Guide

    - 3 - read these guides as necessary. (continue) 3 step using the topaccess using the e-filing topaccess guide this guide describes how to use the topaccess. E-filing guide this guide describes how to use the e-filing. • overview • [device] tab page • [job status] tab page • [logs] tab page • [regis...

  • Page 4: About This Manual

    - 4 - ● about this manual notation used in this manual the following notations may be used in this manual. If there is no special description, windows 7 is used as windows, mac os x 10.7 is used as mac os x, and mb770dn is used as the machine for examples in this document. Depending on your os or mo...

  • Page 5: Table of Contents

    - 5 - table of contents about the manuals....................................2 about this manual....................................4 notation used in this manual................................4 terms in this document........................................4 illustrations in this document.............

  • Page 6

    Table of contents - 6 - checking and canceling the communications...............................71 checking communications ................................71 checking reserved transmissions .......................... 71 checking communication status (log) .................... 71 canceling the transm...

  • Page 7: Convenient Functions

    - 7 - 1 2 3 4 5 6 convenient functions ● convenient functions automatically rotate sent or received document data images are rotated when documents are sent by fax, and the optimum paper size is automatically selected from the available paper, even if the orientation of received fax documents differ...

  • Page 8

    1 2 3 4 5 6 convenient functions - 8 - use the machine as a network printer high-quality images can be printed at high speed from various applications (printing a4, black documents : mb760:47pages/min, mb770:52pages/min). The machine can be connected to networks and used to print documents from mult...

  • Page 9

    1 2 3 4 5 6 convenient functions - 9 - restrict the types of users who can use the machine, or the types of functions that they can use. Configuring user authentication means the machine can only be used by users who have been authorized by an administrator. This reduces the likelihood that the mach...

  • Page 10

    1 2 3 4 5 6 convenient functions - 10 - increase the types and amounts of paper that can be used. Store frequently used functions and settings in memory. • [template] a series of operations that is used regularly can be stored in [template] on the touch panel. For example, the following steps- "redu...

  • Page 11: Printing

    1 2 3 4 5 6 1 printing installing drivers on your computer ··························· p.12 operating environment ············································ p.13 preparations to print from windows ·························· p.14 preparations to print from mac os x·························· p.19 pr...

  • Page 12

    1 2 3 4 5 6 installing drivers on your computer - 12 - ● installing drivers on your computer connect the machine to your computer for macintosh for windows connected via a network connected via usb connected via a network configure the ip address and other settings in windows configure the ip addres...

  • Page 13: Operating Environment

    1 2 3 4 5 6 operating environment - 13 - ● operating environment windows operating environment • windows 8/windows 8 (64-bit version) • windows 7/windows 7 (64-bit version) • windows server 2008 r2 • windows vista/windows vista (64-bit version) • windows server 2008/windows server 2008 (64-bit versi...

  • Page 14

    1 2 3 4 5 6 preparations to print from windows - 14 - ● preparations to print from windows setup via a network (windows) setup procedures set up the equipment if there is no dhcp server on the network, you will need to configure the ip address of the computer and printer manually. If you have been i...

  • Page 15

    Preparations to print from windows - 15 - 1 2 3 4 5 6 (5) select [internet protocol version 4 (tcp/ ipv4)] and click [properties]. (6) enter the numbers for the ip address, subnet mask, default gateway, and dns server, and click [ok]. Memo • if an ip address is to be obtained automatically from a dh...

  • Page 16: Setup Via Usb (Windows)

    Preparations to print from windows - 16 - 1 2 3 4 5 6 (6) read "environmental advice for users" and click "next". (7) select the driver you want to install and click the "multi installation" button to install them all at once. (8) click network to search the device. (9) when the target device is det...

  • Page 17

    Preparations to print from windows - 17 - 1 2 3 4 5 6 2 load the "software dvd-rom" supplied with the machine. 3 when [autoplay] is displayed, click [run setup.Exe]. 4 select the language and click "next". 5 select the device you want to use and click "next". 6 read the license agreement and click "...

  • Page 18

    Preparations to print from windows - 18 - 1 2 3 4 5 6 10 click "next". 11 click "exit" button to finish. 12 select [start] - [control panel] - [devices and printers]. Setup is complete when an icon appears in the "devices and printers" folder. Memo • to use this machine as a printer, install any of ...

  • Page 19

    1 2 3 4 5 6 preparations to print from mac os x - 19 - ● preparations to print from mac os x setup via a network (mac os x) note • mac os x and printer drivers may differ from information listed here due to driver updates. The print method (protocol) there is a method available to print from mac os ...

  • Page 20

    Preparations to print from mac os x - 20 - 1 2 3 4 5 6 (3) click [+]. (4) click [default] and select the machine name is displayed, then click [add]. (5) in [name] box, the name that you selected in the list is displayed automatically. Memo • clicking [device settings] in the control panel, and [pri...

  • Page 21: Printing From Windows

    1 2 3 4 5 6 printing from windows - 21 - ● printing from windows before using the printer driver before printing, you have to configure the following options: • configuration settings to use optional devices such as optional trays or the finisher, you must first configure these devices. The features...

  • Page 22

    Printing from windows - 22 - 1 2 3 4 5 6 3 display the [device settings] tab menu, and set the following options. Model selection — this sets the model type. The setup items of the printer driver are changed according to the model selected. Option — this option sets whether the following optional de...

  • Page 23

    Printing from windows - 23 - 1 2 3 4 5 6 note • when the user management setting is enabled, it is used to manage a print job instead of the department code management setting. In this case, a user name that has been entered to log in to your computer is used for the authentication of the print job....

  • Page 24: Printing From Application

    Printing from windows - 24 - 1 2 3 4 5 6 copying the ppd file for windows the software dvd-rom contains a printer description file for popular windows applications. For applications not allowing the automatic installation of ppd files, copy the ppd file to a proper directory in order to enable print...

  • Page 25

    Printing from windows - 25 - 1 2 3 4 5 6 3 setting the print options on each tab according to how you want to print. • setting the print options varies depending on how you want to print a document. • you can also set the print options using setting profiles. 4 click [ok] to save the settings. 5 cli...

  • Page 26: Printing From Macintosh

    1 2 3 4 5 6 printing from macintosh - 26 - ● printing from macintosh printing from application on mac os x considerations and limitations • if any double-byte character is included in the user name or document name when printing is performed, the printing job is displayed with [osx user] or [osx doc...

  • Page 27: Copying

    1 2 3 4 5 6 2 copying how to make copies ··········································· p.28 basic copy modes ··············································· p.43.

  • Page 28: How To Make Copies

    1 2 3 4 5 6 how to make copies - 28 - ● how to make copies before making copies forgery prevention function this equipment has a forgery prevention function. Therefore, scan or copy function might not operate correctly. Placing originals acceptable originals when the radf (reversing automatic docume...

  • Page 29

    How to make copies - 29 - 1 2 3 4 5 6 book-type originals you can place book-type originals on the original glass. Do not place any heavy objects (8 kg(18lb.) or over) on the original glass and do not press on it with force. Breaking the glass could injure you. 1 raise the radf. 2 open the desired p...

  • Page 30

    How to make copies - 30 - 1 2 3 4 5 6 continuous feed mode the feeding mode is set at “continuous feed mode” by default. Once you set the originals and then press the [start] button, they are scanned page by page continuously. It is useful when you want to copy more than one original at one time. 1 ...

  • Page 31: Making Copies

    How to make copies - 31 - 1 2 3 4 5 6 3 if there is another original, insert it in the same way. 4 after all the originals are pulled in, press [job finish]. Memo • if you want to stop copying, press [job cancel]. Making copies basic copying procedure make copies following the procedure below. 1 mak...

  • Page 32

    How to make copies - 32 - 1 2 3 4 5 6 5 press the [start] button on the control panel. Copying starts. The paper exits with its copied side down. Note • be careful because the paper exiting area and the paper itself are hot. The menu shown below may appear when you are using particular modes. This m...

  • Page 33

    How to make copies - 33 - 1 2 3 4 5 6 scanning the next original during copying even if copying is in progress or “ready (warming up)” is displayed on the touch panel, you can scan the next original (auto job start). 1 place the original(s). 2 set the number of copy sets and the copy modes as requir...

  • Page 34

    How to make copies - 34 - 1 2 3 4 5 6 note • if you want to change settings such as the reproduction ratio, density, original mode or 1/2-sided copying, you must finish the proof copy first. Then change these settings and scan the original again. 1 place paper in the tray(s). 2 place the original(s)...

  • Page 35: Bypass Copying

    How to make copies - 35 - 1 2 3 4 5 6 bypass copying when you make copies on ohp film, sticker labels, envelopes or non-standard size paper, place the copy paper on the multi- purpose tray (mpt). Bypass copying is also recommended for copying on standard size paper which is not set in any of the tra...

  • Page 36

    How to make copies - 36 - 1 2 3 4 5 6 bypass copying on standard size paper copying on a4, a5 and b5 size paper (in equipment other than for north america) / letter and legal size paper (in equipment for north america) 1 place the original(s). 2 place the paper with its copy side face up on the mult...

  • Page 37

    How to make copies - 37 - 1 2 3 4 5 6 6 select the paper type. 1) select the paper type. 2) press [ok]. Note • if you select a wrong paper type, this could cause a paper misfeed or significant image trouble. • when you select a paper type, you can confirm it with the icons displayed on the equipment...

  • Page 38

    How to make copies - 38 - 1 2 3 4 5 6 3 press the button of the same size as the paper you placed on the multi-purpose tray. The selected size will be registered as an “other” size. 4 press [other] under “copy”. The paper size is now set to the one registered as “other” size. Note • if the paper siz...

  • Page 39

    How to make copies - 39 - 1 2 3 4 5 6 copying on an envelope note • the acceptable envelope sizes are as follows: dl (110 mm x 220 mm), com9 (3 7/8" x 8 7/8"), com10 (4 1/8" x 9 1/2"), monarch (3 7/8" x 7 1/2"), cho-3 (120 mm x 235 mm), cho-4 (90 mm x 205 mm), you-4 (105 mm x 235 mm) notes for using...

  • Page 40

    How to make copies - 40 - 1 2 3 4 5 6 6 press the button of the same size as the envelope you placed on the multi-purpose tray. The size of the selected envelope will be registered as an “other” size. 7 press [other] under “copy”. The paper size is now set to the size of the envelope placed on the m...

  • Page 41

    How to make copies - 41 - 1 2 3 4 5 6 4 press [custom paper] on the touch panel. 5 key in the dimension. 1) press [length] and key in the value. (127mm to 356mm) 2) press [width] and key in the value. (64mm to 216mm) 3) press [ok]. Length and width are indicated as shown on the right: to call up the...

  • Page 42: Using The Offline Stapler

    How to make copies - 42 - 1 2 3 4 5 6 using the offline stapler you can use the stapler when installing the offline stapler. 1 insert paper deep into the stapler. Paper is automatically stapled..

  • Page 43: Basic Copy Modes

    1 2 3 4 5 6 basic copy modes - 43 - ● basic copy modes before using copying functions default settings this equipment is under its “default settings” when the power is turned on, namely, if no setting change has been applied yet, the equipment’s settings return to the default ones when the energy sa...

  • Page 44: Paper Selection

    Basic copy modes - 44 - 1 2 3 4 5 6 paper selection automatic paper selection (aps) when copying from the radf (reversing automatic document feeder), this equipment detects the size of an original and selects paper of the same size automatically. This function is called automatic paper selection (ap...

  • Page 45

    Basic copy modes - 45 - 1 2 3 4 5 6 copying mixed-size originals in one operation you can copy a set of originals whose widths are the same and lengths are different, using the radf (reversing automatic document feeder). The original sizes that can be mixed are as follows: other than north america: ...

  • Page 46: Setting Original Modes

    Basic copy modes - 46 - 1 2 3 4 5 6 setting original modes you can make copies with the optimal image quality by selecting the following modes for your original. 1 press [original mode] on the touch panel. 2 select the original mode, and then press [ok]. Density adjustment this equipment detects the...

  • Page 47: Enlargement and Reduction

    Basic copy modes - 47 - 1 2 3 4 5 6 enlargement and reduction copying you can change the reproduction ratio of copied images in the following procedures: automatic magnification selection (ams): you need to specify the copy paper size in advance. Then this equipment will detect the original size and...

  • Page 48

    Basic copy modes - 48 - 1 2 3 4 5 6 specifying both the original size and the copy paper size separately 1 place paper in the tray(s). 2 place the original(s). 3 press [zoom] on the touch panel. 4 select the desired sizes for the original and copy paper, and then press [ok]. Memo • if you want to se...

  • Page 49: Selecting Finishing Mode

    Basic copy modes - 49 - 1 2 3 4 5 6 specifying reproduction ratio manually 1 place paper in the tray(s). 2 place the original(s). 3 press [zoom] on the touch panel. 4 press the buttons below to select the desired reproduction ratio. [ up] and [ down] buttons the reproduction ratio changes by 1% ever...

  • Page 50

    Basic copy modes - 50 - 1 2 3 4 5 6 finisher • inner finisher use the table below to check the available finishing modes. Name of each part of the finisher • do not let your hand come close to the tray moving up or down. The hand may get caught, which may result in personal injury. Sort/group mode w...

  • Page 51

    Basic copy modes - 51 - 1 2 3 4 5 6 4 select [sort] or [group], and then press [ok]. 5 key in the desired number of copies. 6 select other copy modes as required, and then press the [start] button on the control panel. Staple sort mode when you make more than one set of copies, the copied paper can ...

  • Page 52: Duplex Copying

    Basic copy modes - 52 - 1 2 3 4 5 6 maximum number of sheets available for stapling the maximum number of sheets available for stapling differs depending on the type of the finishing device installed, paper size or paper weight. Inner finisher note • 2 cover sheets (106 to 209g/m 2 (29 lb. Bond to 1...

  • Page 53

    Basic copy modes - 53 - 1 2 3 4 5 6 2-sided original -> 1-sided copy ( p.53 ) 1-sided original -> 2-sided copy ( p.54 ) 2-sided original -> 2-sided copy ( p.54 ) note • use plain or thick 1 for duplex copying. Making a 1-sided copy memo • when you copy 2-sided portrait originals which open to the...

  • Page 54: Performing Copy & File

    Basic copy modes - 54 - 1 2 3 4 5 6 4 select the desired mode, and then press [ok]. [1->1 simplex]: 1-sided original to 1-sided copy [2->1 split]: 2-sided original to 1-sided copy 5 select other copy modes as required, and then press the [start] button on the control panel. Making a 2-sided copy mem...

  • Page 55

    Basic copy modes - 55 - 1 2 3 4 5 6 memo • you can store data in an e-filing box with the store to e- filing function. For details, refer to the e-filing guide. 1 place the original(s). 2 press [storage] on the touch panel. 3 press [copy & file] on the touch panel. 4 press the necessary buttons for ...

  • Page 56

    Basic copy modes - 56 - 1 2 3 4 5 6 setting share folder when a user who has the privilege of setting a share folder has pressed [remote 1] or [remote 2], the menu for specifying a directory appears. The setting items differ depending on the file transfer protocol to be used. Ftp, smb, netware ipx/s...

  • Page 57: Fax

    1 2 3 4 5 6 3 fax sending/receiving a fax····································· p.58 checking and canceling the communications ············································································· p.71.

  • Page 58: Sending/receiving A Fax

    1 2 3 4 5 6 sending/receiving a fax - 58 - ● sending/receiving a fax note initializing the fax is required to use the fax for the first time. For details, refer to the advanced guide. Sending a fax basic procedures this section describes the basic procedures to send a fax. For details of in-depth op...

  • Page 59

    Sending/receiving a fax - 59 - 1 2 3 4 5 6 5 to display the preview screen, press [preview]. 6 press [send]. The fax is sent or reserved. Memo • alternatively, you can press the [start] button on the control panel. • in the memory transmission mode, the original is scanned into memory. Once a connec...

  • Page 60

    Sending/receiving a fax - 60 - 1 2 3 4 5 6 note • do not place any heavy objects (8 kg(18lb.) or over) on the original glass and do not press on it with force. Original scanning range the following figures show the original scanning area. Any information in the shaded area is not printed on the pape...

  • Page 61

    Sending/receiving a fax - 61 - 1 2 3 4 5 6 placing the original(s) on the radf this section describes how to set the original(s) on the radf (reversing automatic document feeder). When the originals are placed on the radf, the uppermost page is the first to be scanned and sent. • when scanning the d...

  • Page 62

    Sending/receiving a fax - 62 - 1 2 3 4 5 6 setting the transmission conditions you can set the fax transmission conditions. Memo • the transmission conditions are only applied to the current transmission. They return to the default settings after the transmission. • each default setting of resolutio...

  • Page 63

    Sending/receiving a fax - 63 - 1 2 3 4 5 6 ecm switch the ecm (error correction mode) communication on or off. Ecm is an internationally standardized communication mode that automatically corrects errors that occur during fax transmissions. With this setting option on, even when the transmitted data...

  • Page 64

    Sending/receiving a fax - 64 - 1 2 3 4 5 6 specifying the recipient there are various ways to specify the recipient, such as direct entry with the control panel and address book entry. Memo • to use the address book, you need to register recipients’ fax numbers to the book in advance. For details of...

  • Page 65

    Sending/receiving a fax - 65 - 1 2 3 4 5 6 • in the memory transmission mode, you can specify multiple recipients to send the same document at once. Repeat the recipient selection operation until all the recipients are selected. For the multi-address transmission, you can also specify recipients by ...

  • Page 66

    Sending/receiving a fax - 66 - 1 2 3 4 5 6 • in the memory transmission mode, you can specify multiple recipients to send the same document at once. Repeat the recipient selection operation until all the recipients are selected. For the multi-address transmission, you can also specify recipients by ...

  • Page 67

    Sending/receiving a fax - 67 - 1 2 3 4 5 6 confirming the recipients you can confirm the recipients which you specified or delete unnecessary recipients. 1 press [destination]. 2 the recipient list screen is displayed. Select the recipient you want to delete, and then press [delete]. • press or to s...

  • Page 68

    Sending/receiving a fax - 68 - 1 2 3 4 5 6 3 press [option] and set the transmission conditions. P.62 "setting the transmission conditions" 4 pick up the handset of the external telephone. 5 use the external telephone to dial the fax number. P.64 "specifying the recipient" note • when you use the ex...

  • Page 69: Receiving A Fax

    Sending/receiving a fax - 69 - 1 2 3 4 5 6 receiving a fax reception mode this section describes how to receive a fax. Refer to the appropriate section for your current reception mode. The reception mode can be set on the admin menu. For details of the current setting, ask your administrator. Beside...

  • Page 70

    Sending/receiving a fax - 70 - 1 2 3 4 5 6 when an original is longer than the paper printing area it is printed according to the following priority: • when an original is up to 10 mm (0.4 inch) longer than the printing area: the part of the originals that exceeds the paper printing area is discarde...

  • Page 71: Checking Communications

    Checking and canceling the communications - 71 - 1 2 3 4 5 6 ● checking and canceling the communications checking communications checking reserved transmissions you can check reserved fax transmissions. 1 press [job status]. 2 select [fax]. • reserved transmission jobs are listed in the reversed chr...

  • Page 72: Canceling The Transmission

    Checking and canceling the communications - 72 - 1 2 3 4 5 6 • to print the log of transmissions or receptions, press [journal]. Advanced guide • in the “status” column, the status is indicated as follows: registering recipients’ fax numbers to the address book to register recipient's fax numbers in...

  • Page 73

    Checking and canceling the communications - 73 - 1 2 3 4 5 6 2 the confirmation screen for the next original is displayed. Press [job cancel]. • if you press [job finish], the scanned originals are sent. • if you leave the screen for the next original unattended for the period of the auto clear sett...

  • Page 74

    Checking and canceling the communications - 74 - 1 2 3 4 5 6 3 the confirmation screen for the deletion is displayed. Press [delete]..

  • Page 75: Scanning

    1 2 3 4 5 6 4 0. Scanning basic operation ················································· p.76.

  • Page 76: Basic Operation

    1 2 3 4 5 6 basic operation - 76 - ● basic operation viewing touch panel for scan menu when you press the [scan] button on the control panel, the scan menu is displayed on the touch panel. Note • if the equipment is managed by the department management or user management features, you need to enter ...

  • Page 77: Scan to E-Filing

    Basic operation - 77 - 1 2 3 4 5 6 the available settings in the scan mode and their factory defaults are listed in the table below. Memo • to display a list of the selected options for scan settings, press [settings]. P.76 "viewing touch panel for scan menu" • the default settings can be changed us...

  • Page 78

    Basic operation - 78 - 1 2 3 4 5 6 • to store the scan in the equipment’s shared folder, proceed to step 4. • to store the scan in a network folder, proceed to step 5. Note • storing data in a network folder requires the administrator to set the equipment configuration. For details, refer to the top...

  • Page 79

    Basic operation - 79 - 1 2 3 4 5 6 8 select a folder for the remote destination. 1) select ftp, smb, netware ipx, netware ip, or ftps as a protocol to transfer the file. 2) press [server name], [network path], [login user name], [password] and/or [command port] and specify the file destination. 3) f...

  • Page 80

    Basic operation - 80 - 1 2 3 4 5 6 memo •pressing adds a meaningful number, such as date and time, to the file name. The number is assigned according to the format selected for the date format setting, which is available for the administrator on topaccess. For details, refer to the topaccess guide. ...

  • Page 81: Scan to E-Mail

    Basic operation - 81 - 1 2 3 4 5 6 • if the number of jobs waiting to store scans in the equipment's hard disk exceeds 20, a message appears to indicate that the equipment’s memory is full. In this case, wait a while until memory becomes available again or delete unnecessary jobs from [job status]. ...

  • Page 82

    Basic operation - 82 - 1 2 3 4 5 6 6 specify the e-mail address(es) that you want to send to. 1) press [input @]. 2) enter an e-mail address using the keyboard and digital keys, and then press [ok] to set the entry. 3) finally, press [ok]. You can specify e-mail addresses in various ways. For detail...

  • Page 83

    Basic operation - 83 - 1 2 3 4 5 6 memo •xps files are supported only by the following operating systems: - windows vista - windows 7 - windows 8 - windows server 2012 - windows server 2008 sp1 or later versions - windows xp sp2 or later versions with .Net framework 3.0 installed - windows server 20...

  • Page 84: Scan to Usb

    Basic operation - 84 - 1 2 3 4 5 6 • when the temporary workspace is full on the equipment’s hard disk, a message appears and the job is canceled. The available workspace can be viewed on the topaccess [device] tab. Scan to usb the scan to usb function stores scans to a usb storage device. To store ...

  • Page 85

    Basic operation - 85 - 1 2 3 4 5 6 note •pressing adds some numbers such as date and time to the file name. These numbers can be set in the format selected in the date format setting of the topaccess menu, which can be set by the administrator. For details, refer to the topaccess guide. •the trailin...

  • Page 86: Web Service (Ws) Scan

    Basic operation - 86 - 1 2 3 4 5 6 • if the number of jobs waiting to store scans in the equipment's hard disk exceeds 20, a message appears to indicate that the equipment’s memory is full. In this case, wait a while until memory becomes available again or delete unnecessary jobs from [job status]. ...

  • Page 87: Using Saved Scan Data

    Basic operation - 87 - 1 2 3 4 5 6 memo • to cancel the operation, press [cancel]. Note • if the above screen does not appear, make sure that the selected client is running. Using saved scan data using scan data saved as e-filing documents you can display a list of the scan data stored in e-filing a...

  • Page 88: Log

    Basic operation - 88 - 1 2 3 4 5 6 using scans saved in network folders (remote 1/2) when you select [remote 1] or [remote 2] to store data, they are stored in the scan folder automatically created in the specified network folder. When these data contain a template, they are stored in a folder that ...

  • Page 89: Utilities That Can Be

    1 2 3 4 5 6 5 utilities that can be used with this machine list of utilities························································· p.90

  • Page 90: List of Utilities

    List of utilities - 90 - 1 2 3 4 5 6 ● list of utilities common utilities for windows/macintosh you can use the following utilities. For details, refer to the utility guide. • addressbook viewer • filing box backup/restore • twain driver • file downloader • remote scan driver • wia driver.

  • Page 91: Index

    1 2 3 4 5 6 6 index.

  • Page 92

    - 92 - 1 2 3 4 5 6 a advanced guide ................................... 2 alert message display area ............... 76 ams (automatic magnification selection) ........................................................ 47 [aps] ................................................... 44 aps (automatic pape...

  • Page 93

    - 93 - 1 2 3 4 5 6 original size .................................. 62 original size ........................................ 77 original stopper .................................. 30 originals acceptable originals .................... 28 mixed-size originals .................... 45 placing ...........

  • Page 94

    May 2013 45611202ee rev1.