Summary of MH920
Page 1
Mh920 console international installation manual.
Page 2
2 table of contents 1. Preface .......................................................................................................................... 3 2. System requirements ................................................................................................... 3 3. Installing the m...
Page 3: 1. Preface
3 1. Preface this manual describes the usage of "mh920 console international" (maintenance console) for setting wireless communication module and installation procedure of usb driver for wireless communication module. 2. System requirements a pc that the maintenance console is to be installed must s...
Page 4
4 3. Installing the maintenance console the installation procedure of the maintenance console is described below. (1) extract the downloaded file of maintenance console. (2) execute "mh920consoleinternational.Msi" in the extracted files and start the maintenance wizard setup wizard. On the "setup wi...
Page 5
5 (3) read the license agreement to the end with the scroll bar, select "i agree", then press the "next" button. Figure 2. License agreement dialog (4) on the "select installation folder" dialog box, select the installation folder and click "next" button. Default location of an installation folder i...
Page 6
6 figure 3-2 installation folder selection dialog (64 bit os) (5) on the "confirm installation" message box, press the "next" button. Figure 4. Confirm installation message * if a "user account control" dialog box is displayed and asked for confirmation of permission to change, please click the "yes...
Page 7
7 (6) after the "installation complete" message box is displayed, click the "close" button to finish the installation. Figure 5. Installation complete message box.
Page 8
8 4. Installing the usb driver a usb driver is required before connecting the wireless communication module to the pc. The installation procedure of the usb driver is shown below. (1) when using a product with the communication module built-in, connect the usb connector for the maintenance console o...
Page 9
9 for windows 7 or windows 8.1 (4) select "control panel" from the start menu. (5) select "device manager" from the displayed list and expand the "other devices" section. (6) find "usb cdc serial port" in the "other devices" list. Right click the usb cdc serial port to display a menu and select "pro...
Page 10
10 for windows 10 (7) right-click the start button and select "control panel". (8) select "device manager" from the control panel items list. Expand the "ports (com & lpt)" column on the catalog items of device manager. (9) find the "usb serial device (com x)" in the "ports (com & lpt)" list. Right-...
Page 11
11 (10) when the "usb cdc serial port properties" dialog box is appeared, click the "update driver" button to activate the "update driver software" wizard. Figure 7. Usb cdc serial port's property" dialog box (11) on the "update driver software" dialog box, select "browse my computer for driver soft...
Page 12
12 (12) on the "update driver software" dialog box, press "browse" button, select the installation folder of the maintenance console, and click the "next" button. The default location of an installation folder is as following depending on the operating system of the destination pc. · for 32bit os c:...
Page 13
13 (13) if a security warning is displayed, select "install this driver software anyway" and continue installation. Figure 10. Windows security dialog box (14) an "installing driver" message and an "installation completed" messages should be displayed. (15) on the "update driver software" window, co...
Page 14
14 (16) confirm that the port number of "oki usb cdc serial port" is displayed in the "ports (com & lpt)" colum of device manager window. Figure 12. Device manager *) when setting up the maintenance console, com port number should be specified. Remember the com port number set in the procedure (16)....
Page 15
15 document no.： mh920-0102-001 date: october, 2017 oki electric industry co., ltd..