Oki MICROLINE ML320 Maintenance Manual - page 220
of
354
Yes The ALE (pin
PSEN (pin
the same as shown in Figure
RD (pin
(pin 12) and BUS signals of
are
The signal level of the bus line should be stabilized to high or low
level at the full of
or at the rise of
No Replace Q7.
Yes The LAMP SD (pin 5) and LAMP SD CLK (pin 7) signals are the same as shown
in Figure
LAMP SD CLK
0.38
Figure 6
The signal level of LAMP SD should be stabilized to high or low level
at the rise of SD CLK.
No Replace
Yes Replace
1-7