- DL manuals
- Oki
- Printer
- ML1120 Plus
- User Manual
Oki ML1120 Plus User Manual
Summary of ML1120 Plus
Page 1
User’s guide ml1120 plus/ml1190 plus ml1120 plus/ml1190 plus.
Page 2: Reface
Ml1120 plus/ml1190 plus user’s guide - perface > 2 p reface every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki printing solutions assumes no responsibility for the results of errors beyond its control. Oki printing solutions also can...
Page 3: Contents
Ml1120 plus/ml1190 plus user’s guide - contents > 3 contents introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 about this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 on-line usage . . . . . . . . . . . . . . . ....
Page 4
Ml1120 plus/ml1190 plus user’s guide - contents > removing continuous forms . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 how to use bottom tractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 setting the paper thickness lever . . . . . . . . . . . . . . . . . . . . . . . 1 o...
Page 5: Otes
Ml1120 plus/ml1190 plus user’s guide - notes, cautions and warnings. > 5 n otes , cautions and warnings . Note a note provides additional information to supplement the main text. Caution! A caution provides additional information which, if ignored, may result in equipment malfunction or damage. Warn...
Page 6: Ntroduction
Ml1120 plus/ml1190 plus user’s guide - introduction > i ntroduction congratulations on purchasing this oki printing solutions printer! The ml1120 plus(9-pin) and ml1190 plus(24-pin) are designed to provide highly reliable letter quality printing and high resolution graphics for the desktop/office pr...
Page 7
Ml1120 plus/ml1190 plus user’s guide - introduction > installation guides: accompany consumable items and optional accessories to describe how to install them. These are paper documents that are packaged with the consumables and optional accessories. On-line help: on-line information accessible from...
Page 8
Ml1120 plus/ml1190 plus user’s guide - introduction > 2. Choose which pages you wish to print: (a) [all pages], (1), for the entire manual. (b) [current page], (2), for the page at which you are looking. (c) [pages from] and [to], (3), for the range of pages you specify by entering their page number...
Page 9: Etting
Ml1120 plus/ml1190 plus user’s guide - getting started > 9 g etting started warning! If you have not already done so, familiarise yourself with the content of the installation safety booklet supplied with your printer. R etaining packing materials after setting up your printer according to the instr...
Page 10
Ml1120 plus/ml1190 plus user’s guide - getting started > 10 3. Platen knob: turn to move or eject the paper. 4. Paper thickness lever: set according to the thickness of the paper. There is also a setting to facilitate ribbon replacement. 5. Control panel: contains button switches and indicators (des...
Page 11
Ml1120 plus/ml1190 plus user’s guide - getting started > 11 r ear view 1. Paper tray: insert cut sheet paper for use by the printer (one sheet at a time) 2. Power connector: connect to printer power cable. 3. Paper guides: can be adjusted as required to locate the left edge of cut sheet paper. 4. Pi...
Page 12
Ml1120 plus/ml1190 plus user’s guide - getting started > 12 l ocating your printer select a firm, solid, level surface on which to site your printer. Allow enough space around your printer (e.G. At least 60 cm from any wall) for easy access to the platen knob and the various paper feed paths. > > ma...
Page 13: Caution!
Ml1120 plus/ml1190 plus user’s guide - getting started > 13 2. Connect the power cable (1) to the power connector (2) on the printer. 3. Connect the power cable to a 220/240 v ac power outlet and switch on the outlet power. 4. Turn the printer power switch to on. 5. Check that the sel and status ind...
Page 14
Ml1120 plus/ml1190 plus user’s guide - getting started > 14 1. Turn the printer power switch to off. 2. Set the paper type lever to cut sheet. 3. Remove the top cover and set the paper thickness lever to position 1. 4. Press and hold the lf/ff and the load/eject buttons and turn the power switch to ...
Page 15: Onnecting
Ml1120 plus/ml1190 plus user’s guide - connecting to a computer > 15 c onnecting to a computer in this section you will interconnect your printer and computer, install the printer driver in your computer and print a test page. I nterfaces your printer is equipped with three data interfaces: caution!...
Page 16
Ml1120 plus/ml1190 plus user’s guide - connecting to a computer > 16 break off the tabs (4) to allow the cables to sit neatly underneath the printer. 3. Turn on the printer. 4. Turn on the computer. I nstalling the printer driver insert the drivers cd into your computer and follow the on-screen inst...
Page 17: Rinting
Ml1120 plus/ml1190 plus user’s guide - printing from a computer > 17 p rinting from a computer when printing to your printer from, for example, a windows application on your computer, make your printing selections from the driver windows that appear on screen. These driver windows have been designed...
Page 18: Tilities
Ml1120 plus/ml1190 plus user’s guide - utilities > 18 u tilities o verview the following utilities are available for your printer. Dot impact printer utilities (oki dipus) status monitor menu setup utility top of form setup utility button setup utility a ccessing you may access the utilities via the...
Page 19: Utilities On The Cd
Ml1120 plus/ml1190 plus user’s guide - utilities > 19 i nstalling the utilities w indows utilities on the cd load the utilities from the cd supplied with your printer. Oki dipus (d ot i mpact p rinter u tilities ) g eneral information this is a set of utilities that allow you to control the printer ...
Page 20
Ml1120 plus//ml1190 plus user’s guide - utilities > 20 m enu s etup u tility this utility lets you change your printer’s menu settings from your computer. You can also save frequently-used settings to a file on your computer for quick resetting. T op of f orm s etup u tility this utility lets you se...
Page 21: Aper
Ml1120 plus/ml1190 plus user’s guide - paper handling > 21 p aper handling this section describes how to use cut sheet paper and continuous forms in your printer. L oading cut sheet paper 1. Ensure that the printer is turned on. Note if there are any continuous forms in the printer, eject them as de...
Page 22: Caution!
Ml1120 plus/ml1190 plus user’s guide - paper handling > 22 3. Set the left paper margin by adjusting the paper guide (1). Position the edge of the paper guide (1) at the tip of the printed line marker arrow (2) on the paper tray. 4. Remove the top cover and set the paper thickness lever (1) to suit ...
Page 23
Ml1120 plus/ml1190 plus user’s guide - paper handling > 23 5. With the printing side facing downwards, into the printer and the left edge aligned with the paper guide (1), carefully insert the paper on the paper tray (2) into the printer until it is gripped. Insert the paper with both hands and push...
Page 24
Ml1120 plus/ml1190 plus user’s guide - paper handling > 24 e jecting cut sheet paper when the printer reaches the end of the cut sheet page it automatically ejects the page. If required, add another sheet for the printer to continue printing from where it left off. To eject a cut sheet left in the p...
Page 25
Ml1120 plus/ml1190 plus user’s guide - paper handling > 25 l oading continuous forms s etting up continuous forms to avoid paper feeding problems, carry out the following: 1. Check your printer is on a surface approximately 75 cm above the floor. 2. Position the continuous forms supply directly belo...
Page 26
Ml1120 plus/ml1190 plus user’s guide - paper handling > 26 3. Remove the top cover and set the paper thickness lever (1) to suit the paper. See "setting the paper thickness lever" on page 41 . Note if the paper thickness lever setting does not match the paper being used, paper feeding and printing m...
Page 27
Ml1120 plus/ml1190 plus user’s guide - paper handling > 27 5. Lift the locking lever (1) of the left pin tractor and slide the pin tractor as required to adjust the paper position. Press the locking lever back down to lock the pin tractor in the desired position. 6. Lift the locking lever (1) of the...
Page 28
Ml1120 plus/ml1190 plus user’s guide - paper handling > 28 7. Open the left and right pin tractor covers and feed the continuous forms in the direction of the arrows, locating the sprocket holes in the forms onto the sprocket pins. Ensure that the forms are properly aligned on the sprocket pins, the...
Page 29
Ml1120 plus/ml1190 plus user’s guide - paper handling > 29 9. Replace the input tray and paper tray by fitting the input tray into the gooves at the back of the printer and pushing gently forward until the tray clips into place. 10. Press the load/eject button. The continuous forms will be taken int...
Page 30
Ml1120 plus/ml1190 plus user’s guide - paper handling > 30 note • specific kind of media may affect the accuracy of relining due to passage load of the media. In this case, use the printer with paper guide erected. • specific kind of media may cause slipping and the last sheet may not be ejected. Co...
Page 31
Ml1120 plus/ml1190 plus user’s guide - paper handling > 31 t earing off continuous forms 1. With the sel indicator illuminated, press and hold the lf/ff button to move the continuous form to the next page. 2. Press tear to align the tear-off perforations on the form with the paper cutter on the prin...
Page 32
Ml1120 plus/ml1190 plus user’s guide - paper handling > 32 (b) to retract the forms, continue to hold down the tear button and the lf/ff button. Note if a movement greater than +- 0.18 mm (1/144 in) for ml1120 plus and +-0.14 mm (1/180 in) for ml1190 plus is specified, the above adjustment cannot be...
Page 33
Ml1120 plus/ml1190 plus user’s guide - paper handling > 33 5. Lift the pin tractor covers and remove the forms. 6. Close the pin tractor covers. 7. Replace the input tray and paper tray by fitting the input tray into the gooves at the back of the printer and pushing gently forward until the tray cli...
Page 34
Ml1120 plus/ml1190 plus user’s guide - paper handling > 34 h ow to use b ottom t ractor 1. Remove the access cover. 2. Remove the pull up assy. Access cover assy pull up assy.
Page 35
Ml1120 plus/ml1190 plus user’s guide - paper handling > 35 3. Remove the sheet guide assy. 4. Remove the left and right knobs of the tractor assy. Sheet guide assy tractor assy knob.
Page 36
Ml1120 plus/ml1190 plus user’s guide - paper handling > 36 6. Fit the u ditch of the tractor assy to post , turn it in the direction of using the post as fulcrum and lock it to the printer proper. 5. Fix the sheet guide assy. Sheet guide assy tractor assy.
Page 37
Ml1120 plus/ml1190 plus user’s guide - paper handling > 37 7. Insert the paper from the paper insertion opening as shown in the diagram. Paper insertion opening 8. Set the paper to the tractor assy. (as regards the ways of choosing the paper size and setting, see the paper setting of the rear tracto...
Page 38: Caution!
Ml1120 plus/ml1190 plus user’s guide - paper handling > 38 9. Turn the ac switch on, push down the lf/ff switch and align the heading position. Caution! In aligning the heading position, if aligned by turning the platen knob in the direction of , the pitch between the first and second lines may get ...
Page 39
Ml1120 plus/ml1190 plus user’s guide - paper handling > 39 cursor 10. Move the cursor in conformity with the width of the paper. * when a sheet of narrow width is to be used, set the cursor as shown in the diagram..
Page 40: Caution!
Ml1120 plus/ml1190 plus user’s guide - paper handling > 40 11. Fix the access cover assy. (the access cover b will not close tightly.) caution! When to use the media of narrow width(3-4inches) by bottom tractor, set the media inside the platen. If the media is set outside the platen, a crease may oc...
Page 41
Ml1120 plus/ml1190 plus user’s guide - paper handling > 41 s etting the p aper t hickness lever there are 6 lever positions, the first 5 for printing purposes and the sixth to facilitate ribbon replacement. Set the paper thickness lever for different paper types as follows: paper type lever position...
Page 42: Perating
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 42 o perating instructions c ontrol panel ml1120 plus the status/alarm indicators and button switches on the control panel allow you to check printer status and control the printer. 1 2.
Page 43: Indicators
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 43 indicators indicator status meaning sel on printer is on-line i.E. Is available to print off printer is off-line i.E. Is not available to print flashing • when flashing together with the alarm indicator, printing cannot be resumed at...
Page 44: Ml1190 Plus
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 44 ml1190 plus the status/alarm indicators and button switches on the control panel allow you to check printer status and control the printer. 1 2 3.
Page 45: Indicators
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 45 indicators indicator status meaning sel on printer is on-line i.E. Is available to print off printer is off-line i.E. Is not available to print flashing • when flashing together with the alarm indicator, printing cannot be resumed at...
Page 46
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 46 b uttons button status function sel on-line sets the printer to off-line. Off-line sets the printer to on-line and disalarms the printer. Lf/ff on-line and off-line feeds paper by one line. Holding the button down results in continuo...
Page 47
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 47 s etting menu values the following information explains the printer settings and how you can change them. Printer items and their values are printed for reference. C onfirming current settings to print the current menu settings, use ...
Page 48
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 48 m enu setting note before changing menu settings, you may wish to print the current menu settings as in "confirming current settings" on page 47 . Set menu item values (printed out for reference as you proceed) as follows: 1. Press s...
Page 49: Ml1120 Plus
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 49 ml1120 plus menu items and settings in the menu settings tables below, factory default settings are shown in bold. Menu item function setting printer control menu emulation mode select epson mode, ibm mode, or ml mode. Ibm epson ml f...
Page 50
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 50 menu item function setting symbol sets menu code page select a code page. Usa canada french multilingual portugal norway brascii abicomp multilingual 858 iso 8859-15 rear feed menu line spacing select line feed pitch. 6 lpi 8 lpi for...
Page 51
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 51 menu item function setting rear feed menu continuous paper top of form select the reference position for the tof position when auto loading continuous form paper from the rear of the printer. (up to the mid-section of characters in t...
Page 52
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 52 menu item function setting top feed menu line spacing select line feed pitch. 6 lpi 8 lpi page length select the page length of cut paper. 279.4 mm(11 ) 296.3 mm(11 2/3 ) 304.8 mm (12 ) 355.6 mm(14 ) 431.8 mm(17 ) 76.2 mm(3 ) 82.6 mm...
Page 53
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 53 menu item function setting top feed menu cut sheet top of form select the reference position for the tof position when feeding cut- paper in manual mode. (up to the mid-section of characters in the first line.) 2.12 mm (1/12 ) 4.23 m...
Page 54
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 54 menu item function setting set-up menu 7 or 8 bits data word set the character code and graphics data units to 7 or 8 bits. (ml emulation only) 8 7 operator panel function select full or limited operation. Full operation limited oper...
Page 55
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 55 menu item function setting set-up menu i/f time out select timeout time for auto interfacing. 15 sec 30 sec 45 sec 1 min 2 min 3 min 4 min 5 min esc si pitch set the contents of esc si commands. (ibm emulation only) 17.1 cpi 20 cpi p...
Page 56
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 56 menu item function setting parallel i/f i-prime set i-prime signal control of the centronics interface. Invalid buffer print buffer clear auto feed xt set whether to enable or disable auto feed xt signal of the centronics interface. ...
Page 57: Ml1190 Plus
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 57 ml1190 plus menu items and settings in the menu settings tables below, factory default settings are shown in bold. Menu item function setting printer control menu emulation mode select epson lq mode, ibm ppr mode, or ibm agm mode. Ep...
Page 58
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 58 menu item function setting symbol sets menu code page select a code page. Usa canada french multilingual portugal norway brascii abicomp multilingual 858 iso 8859-15 rear feed menu line spacing select line feed pitch. 6 lpi 8 lpi for...
Page 59
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 59 menu item function setting rear feed menu continuous paper top of form select the reference position for the tof position when auto loading continuous form paper from the rear of the printer. (up to the mid-section of characters in t...
Page 60
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 60 menu item function setting top feed menu line spacing select line feed pitch. 6 lpi 8 lpi page length select the page length of cut paper. 279.4 mm(11 ) 296.3 mm(11 2/3 ) 304.8 mm (12 ) 355.6 mm(14 ) 431.8 mm(17 ) 76.2 mm(3 ) 82.6 mm...
Page 61
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 61 menu item function setting top feed menu cut sheet top of form select the reference position for the tof position when feeding cut- paper in manual mode. (up to the mid-section of characters in the first line.) 2.12 mm (1/12 ) 4.23 m...
Page 62
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 62 menu item function setting set-up menu operator panel function select full or limited operation. Full operation limited operation reset inhibit set whether to enable or disable an initial command. No yes print suppress effective set ...
Page 63
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 63 menu item function setting set-up menu print style set quiet printing. Normal quiet centering position (continuous) set the centering position for the print head by the number of characters of 10cpi ank. Default mode1 mode2 centering...
Page 64: Tof
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 64 i nitialising menu settings to restore the menu settings to their initial values, carry out the steps below. Note the values adjusted by the adjustment menus are not initialised by the following procedure. 1. Set the power switch to ...
Page 65
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 65 1. Print out the menu settings of the printer as in "confirming current settings" on page 47 and confirm that the tof (in cut sheet mode or continuous forms mode) is 23.28 mm (11/12 in). 2. Set the paper type lever to the required pa...
Page 66
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 66 p rinter speed settings p rinter impact mode when switched on, the printer enters the impact mode selected in the menu. You can change this to normal speed, high speed and quiet printing without using the menus as follows. (this func...
Page 67: Tof
Ml1120 plus/ml1190 plus user’s guide - operating instructions > 67 s etting tof position at the place of user ’ s choice tof position can be set at the place of user’s choice. The reference position refers to the first line of the paper i.E. The position to which the printer feeds the paper when aut...
Page 68: Roubleshooting
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 68 t roubleshooting c learing paper jams c ut sheet paper jammed in printer warning! Do not carry out any operations inside the printer with the power switch set to on. 1. Set the power switch to off. 2. Remove the top cover. 3. Set the paper ...
Page 69
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 69 5. Move the print head away from the paper. 6. Rotate the platen knob in the relevant direction and pull the cut sheet out from the top of the printer. 7. If a paper fragment remains inside the printer: (a) use tweezers to grip and extract ...
Page 70: Warning!
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 70 8. When the paper jams are cleared, replace the ribbon cartridge and replace the printer top cover. 9. Set the power switch to on. C ontinuous forms jammed in printer warning! Do not carry out any operations inside the printer with the powe...
Page 71
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 71 4. Raise each pin tractor cover and remove the continuous forms from the pin tractors. 5. Rotate the platen knob and remove the forms from the front of the printer. 6. If a form fragment remains inside the printer, place two or three forms ...
Page 72
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 72 r esponding to alarm conditions use the following table for guidance on how to respond to indicated alarm conditions. Indicator alarm meanings and actions sel alarm off on paper has run out. Add paper and press the sel button. Off flashing ...
Page 73
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 73 problem cause action sel indicator is illuminated but no printing takes place. Interface cable is disconnected. Reconnect the interface cable. Wrong interface cable has been used. Use correct interface cable. The print head is moving but no...
Page 74
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 74 problem cause action the printout differs from the screen display. Printout of completely different characters or symbols. Incorrect print setup for the user application. Reselect print setup for the applications according to priority. The ...
Page 75
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 75 problem cause action broken and uneven vertical lines. This may happen in bidirectional printing. Use print registration in the adjustment mode to adjust. Too large or small line spacing. Line spacing is not selected correctly. Reselect lin...
Page 76
Ml1120 plus/ml1190 plus user’s guide - troubleshooting > 76 problem cause action paper distortion or jam. Forms are loaded with their left holes out of line with the right ones. Load forms with their left holes in line with the right ones. Inadequate distance between the left and right pin tractors,...
Page 77: Leaning
Ml1120 plus/ml1190 plus user’s guide - cleaning your printer > 77 c leaning your printer to keep your printer in good operating condition, you are advised to clean it regularly. Warning! Set the printer power switch to off and disconnect the power cable from the printer before cleaning the printer. ...
Page 78: Caution!
Ml1120 plus/ml1190 plus user’s guide - cleaning your printer > 78 using a soft cloth, cotton swabs and a vacuum cleaner, clean the interior of the printer as follows: where to clean what to clean the carriage and the area around it clean and remove paper waste, dirt, dust and ribbon shreds. The pape...
Page 79: Onsumables
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 79 c onsumables and accessories c onsumables when the printed image becomes faint or incomplete, replace the ribbon cartridge. C hanging a ribbon cartridge caution! Only use genuine oki original consumables to ensure the best quali...
Page 80: Warning!
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 80 warning! The print head and area around it may be hot after printing. Allow it to cool down before touching it. 4. Grip the ribbon cartridge with your fingers at each end and slope it up and out to remove it from the carriage. 5...
Page 81: Caution!
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 81 7. In the direction indicated by the arrows, insert the pins at both ends of the ribbon cartridge into the u grooves in the printer until the ribbon cartridge is fully locked. Note it may be easier to mount the ribbon cartridge ...
Page 82
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 82 10. Replace the top cover. 11. Set the paper thickness lever to match the paper being used. ( see "setting the paper thickness lever" on page 41. ) 12. Set the printer power switch to on. C onsumable order information item life ...
Page 83: Pecifications
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 83 s pecifications ml1120 plus item specification product name ml1120 plus model no. D22400b print method impact dot matrix print head 9 pins, 0.3 mm (0.0118 in) diameter print direction bi-directional, short-line-seeking printing ...
Page 84
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 84 item specification original oki cartridge ribbon ink color ribbon life black 4 million characters (utility mode) print head life 200 million characters (utility mode) dimensions 349 mm (w) x 150 mm (h) x 232 mm (d) with platen k...
Page 85: Ml1190 Plus
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 85 ml1190 plus item specification product name ml1190 plus model no. D22410b print method impact dot matrix print head 24 pins, 0.2 mm (0.0079 in) diameter print direction bi-directional, short-line-seeking printing print speed hig...
Page 86
Ml1120 plus/ml1190 plus user’s guide - consumables and accessories > 86 item specification dimensions 349 mm (w) x 150 mm (h) x 232 mm (d) with platen knob installed weight approximately 4.4 kg power rating voltage frequency 220 - 240v ± 10% 50/60 hz ± 1 hz power consumption operation (iso/iec 10561...
Page 87: Ndex
Ml1120 plus/ml1190 plus user’s guide - index > 87 i ndex a alarm indications ...................................... 62 aligning perforations ................................ 28 b buttons ..................................................... 37 c cleaning exterior .......................................
Page 88: Ki Contact Details
Ml1120 plus/ml1190 plus user’s guide - oki contact details > 88 o ki contact details oki data (singapore) pte. Ltd. 438 a alexandra road #02-11/12, lobby 3, alexandra technopark singapore (119967) tel:(65) 6221 3722 fax:(65) 6594 0609 http://www.Okidata.Com.Sg oki systems (thailand) ltd. 1168/79, 81...
Page 89
43471827ee rev 2.