Oki ML320T User Manual - page 59
|
User’s Guide: English
59
Super Speed Draft
To use Super Speed Draft (SSD), enter the Menu Mode and
make changes as follows:
1 Press SHIFT + SEL.
2 Press GROUP twice.
3 Press SET until DRAFT prints as the setting for the Print
Mode.
4 Press ITEM.
5 Press SET (SSD prints).
6 Press SHIFT + SEL to exit Menu Mode and save your
changes.
Printer Reset
When you reset the printer, you reinitialize it.
You will need to reset the printer to clear some error
conditions
To reset the printer:
1 Press and release the SEL key to take the printer off-line.
The SEL light will be out.
2 Then, press and hold the SHIFT key and press the RESET
(CHARACTER PITCH) key.
3 The printer is reset.
!
Important!
A printer reset is NOT the same as a reset to factory
defaults.
A printer reset reinitializes the printer, but does NOT
affect any menu settings.
A reset to factory defaults returns ALL menu settings to
the factory defaults.