Oki MPS610c User Manual

1

MPS610c

Safety, Warranty and Regulatory Information . . . . . . . 1

Informations de sécurité, de garantie, et de 

réglementation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Safety Information, 

120-Volt Models

Your OKI product has been carefully designed to give you 

years of safe, reliable performance. As with all electrical 

equipment, there are a few basic precautions you should 

take to avoid hurting yourself or damaging the product.

• Carefully read the provided setup and operating 

instructions.

• Save all provided documentation for future reference.

• Read and follow all warning and instruction labels on the 

product itself.

• Unplug the product before you clean it. Use only a damp 

cloth; do not use liquid or aerosol cleaners.

• Place your product on a firm, solid surface. If you put it on 

something unsteady, it may fall and be damaged. If you 

place it on a soft surface, such as a rug, sofa, or cushion, 

the vents may be blocked, causing the product to 

overheat.

• Protect your product from overheating. Make sure no 

obstructions block the openings of the product. Do not put 

the product on or near a heat source (such as a radiator 

or heat register). Keep the product out of direct sunlight.

• Always use this product in a well ventilated area. Allow 

enough room around the product for adequate ventilation 

and easy access to the paper trays. If you put the product 

in any kind of enclosure, make sure the enclosure is well 

ventilated.

• Do not use your product near water. Do not spill liquid of 

any kind into it. 

• Be certain that your power source matches the rating 

listed on the back of the product. If you are not sure, 

check with your dealer or with your local power company.

• Do not connect this product to an uninterruptible power 

supply (UPS). For further information please contact Oki 

Data at 1-800-OKI-DATA.

• Your product has a grounded, three-prong plug as a 

safety feature. This plug only fits into a grounded outlet. 

If the plug does not fit, the outlet may be an older, 

non-grounded type. Contact an electrician to have the 

outlet replaced. Do not use an adapter to defeat the 

grounding.

• Install the product near an easily accessed power outlet.

• Avoid damaging the power cord. Do not put anything on it 

or place it where it will be walked on. If the cord becomes 

damaged or frayed, replace it immediately.

• If you are using an extension cord or power strip with the 

product, make sure that the total of the amperes required 

by all the equipment on the extension is less than the 

extension’s rating. The total ratings of all equipment 

plugged into the outlet should not exceed 15 amperes.

• Important! A telephone cable using 26 AWG wire or larger 

must be used with this equipment.

• Do not poke anything into the ventilation slots of the 

product. You could get an electrical shock or cause 

hazardous electrical arcing, which could cause a fire.

• Aside from the routine maintenance described in the 

documentation, do not try to service the product yourself. 

Removing the cover may expose you to shocks or other 

hazards. 

• Do not make any adjustments other than those outlined 

in the documentation. You may cause damage that will 

require extensive repair work. The provided 

documentation explains how to get your product serviced 

by qualified Oki Data technicians.

If anything happens that indicates that your product is not 

working properly or has been damaged, unplug it 

immediately and follow the procedures in the provided 

documentation for having your product serviced. 

Here are some of the things to look for.

• The power cord or plug is frayed or damaged.

• Liquid has been spilled into the product, or the product 

has been exposed to water.

• The product has been dropped, or the cabinet is 

damaged.

The product does not function normally when you are 

following the operating instructions.