Oki OF5250 Quick Start Manual - page 7
Quick Reference
E-7
|
Changing Resolution
Change resolution by pressing YES
§
§
§
§
§. The resolution (photo,
extra fine, fine, or standard) is marked by an LED display just
above the YES
§
§
§
§
§ key.
Changing Contrast
Change contrast by pressing
©NO. The contrast (light,
normal, or dark) is marked by an LED display just to the right
of the
©NO key.
Send to Single Location / Keypad
Dialing
1 Load your documents.
2 On the numeric keypad, dial as you would on a normal
telephone.
3 Press Start to begin the transmission.
One-Touch
How to Program
1 Press Select Function.
2 Press 8/+/Location Program.
3 Press a One Touch key to program.
4 Enter the main fax number.
5 Press Start.
6 Enter the location ID (up to 16 characters).
7 Press Start.
8 Enter the optional alternate fax number, if desired. Refer to
steps 4 and 5.
9 Press Start to finish programming.
10 To continue programming One Touch keys, go back to
step 3. When you are finished, press Select Function.
How to Use
1 Load your documents.
2 Press the One Touch key.
3 Press Start to begin the transmission.