1. DL manuals
  2. Oki
  3. Network Card
  4. OKILAN 3100e
  5. User Manual

Oki OKILAN 3100e User Manual

Manual is about: OKi OKILAN 3100e Network Card User's Guide

Summary of OKILAN 3100e

  • Page 1

    Okilan 3100e network card user’s guide 07026201 3100eugb.Book page i friday, march 16, 2001 1:18 pm.

  • Page 2: Preface

    Ii okilan 320e network card preface every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by o...

  • Page 3: Table Of Contents

    English preface iii table of contents preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ii eec compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . Ii energy star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ii table of contents . . . . ....

  • Page 4

    Iv okilan 320e network card windows nt server 4.0 environment. . . . . . . . 32 netware 3.X environment . . . . . . . . . . . . . . . . . 33 netware 4.X and 5 nds environment. . . . . . . . 33 netware 4.X and 5 bindery environment . . . . . 34 peer-to-peer network environment . . . . . . . . . . 34 ...

  • Page 5

    English preface v printer options properties page. . . . . . . . . . . . . .67 network properties page . . . . . . . . . . . . . . . . . .67 novell properties page . . . . . . . . . . . . . . . . . . . .67 device info properties page . . . . . . . . . . . . . . . .67 quick printer status . . . . . ....

  • Page 6

    Vi okilan 320e network card chapter 7 - cautionary notes . . . . . . . . . . . . . . . . . 91 about selftest (loop back test). . . . . . . . . . . . 91 network enable/disable setting . . . . . . . . . . . . . . . . 91 3100eugb.Book page vi friday, march 16, 2001 1:18 pm.

  • Page 7: Chapter 1 - Introduction

    English chapter 1 - introduction 1 chapter 1 - introduction introduction the okilan 3100e network card enables okipage 14i printers to be used in an ethernet network environment. With this network card installed, the okipage 14i printers can be connected to a network, enabling all network users to t...

  • Page 8: Network Card Functions

    2 okilan 320e network card network card functions this network card supports the following functions: • queue server mode and remote printer mode in netware 3.X. • remote printer mode and queue server mode when the netware 4.X bindery is connected. • remote printer mode and queue server mode when th...

  • Page 9: Chapter 2 - Installation

    English chapter 2 - installation 3 chapter 2 - installation printer installation caution: the network card can be affected by static electricity. Do not remove it from the antistatic bag until you are ready to install it. 1. Turn the printer off and disconnect the power supply cable from the printer...

  • Page 10

    4 okilan 320e network card into contact with the printer housing. Secure with two screws (4). 7. Connect the power supply and interface cables. 8. Turn the printer on and take the printer off-line by pressing on-line button. 9. Press menu1 button for less than two second. 10. When personality appear...

  • Page 11

    English chapter 2 - installation 5 resetting the network card turn the printer power off, then turn it on again, pressing and holding down the test button on the network card until on-line appears in the message window. After about 10 seconds, the printer will re-boot automatically. When the printer...

  • Page 12

    6 okilan 320e network card 3100eugb.Book page 6 friday, march 16, 2001 1:18 pm.

  • Page 13: Network Client - Server

    English chapter 3 - network setup 7 chapter 3 - network setup network client - server correspondence the network card supports the following network environments: server client printer admin tool windows nt server 3.51/4.0 windows 2000 windows nt workstation windows 95/98 general web browsers telnet...

  • Page 14: Setting Up Servers

    8 okilan 320e network card setting up servers windows nt4.0 server log on to windows nt with the administrator account or an account with administrative privileges. Installing as an lpr printer 1. Open the [control panel] and double-click on [network]. 2. Click on [add...] button on [services] scree...

  • Page 15

    English chapter 3 - network setup 9 rom and run setup.Exe from that directory (where d:\ is the drive letter of your cd- rom drive; language is your language). 15. When the printer driver is installed, right-click on the installed printer and select [properties]. 16. Click on [print test page] butto...

  • Page 16

    10 okilan 320e network card note: by default, windows will install the english printer driver. To install a localised printer d r i v e r i n y o u r l a n g u a g e , b r o w s e t o d:\driverst40\language on the cd- rom and run setup.Exe from that directory (where d:\ is the drive letter of your...

  • Page 17

    English chapter 3 - network setup 11 installing as lpr printer 1. Open the [control panel] and double-click on [network and dial-up connections]. 2. Double-click on [local area connection] and click on [properties]. 3. Select [internet protocol (tcp/ip)] on [local area connection properties] screen ...

  • Page 18

    12 okilan 320e network card installing as raw printer 1. Complete the printer driver installation as in “installing as lpr printer” on page 11. 2. Open [control panel] and double-click on [printers]. 3. Right-click the installed printer on [printers] screen and select [properties]. 4. Click on [conf...

  • Page 19

    English chapter 3 - network setup 13 3. Click on [next>] on [locate your printer]. 4. Enter an appropriate name so that this printer can be distinguished from others on the network in the text box [printer] and click on [next>]. 5. Click on [ok] when printer driver installation is displayed. 6. Clic...

  • Page 20

    14 okilan 320e network card 2. Right-click the installed printer and select [sharing…]. 3. Select [shared] and enter a suitable printer name in the [share name:] text box. 4. Click on [ok] and end setting up. Netware3.X file server setting up remote printer mode this section describes connecting the...

  • Page 21

    English chapter 3 - network setup 15 registering a printer in a print queue 1. Open [print server information] from [available options] and select a print server to which you wish to attach a print queue from [print servers]. 2. Open [print server configuration] from [print server information]. 3. O...

  • Page 22

    16 okilan 320e network card 2. Change shell.Cfg file or net.Cfg file so that the workstation dedicated to the print purpose can support adequate connections. Which cfg file you will edit depends on the netware client that has been installed. 3. Type the following line in shell.Cfg or net.Cfg: spx co...

  • Page 23

    English chapter 3 - network setup 17 message display in remote printer mode this network card temporarily stops receiving next queue(s) while receiving a job in the netware remote printer mode. When this happens, the netware server side handles this as temporary disconnection and a message to that e...

  • Page 24

    18 okilan 320e network card 10. To delete the user(s) to be notified, select the target user(s) from the user list opened in step 7 above and press delete key. Select [yes] on [delete object from notify list] and press enter key. 11. To add a user to be notified, press insert key with the user list ...

  • Page 25

    English chapter 3 - network setup 19 (b) click the directory where you wish to set the p r i n t s e r v e r , o n n w a d m i n ’ s m a i n window, to select. (c) select [create...] from [objects] menu and open [new object class] screen. (d) select [print server] from the [object class:] list and p...

  • Page 26

    20 okilan 320e network card (a) click the directory where you wish to set up the print queue on nwadmin’s main window. (b) select [create.] from [objects] menu and open [new object class] screen. (c) select [printer] from the [object class:] list and press [ok]. (d) enter the name of the printer you...

  • Page 27

    English chapter 3 - network setup 21 (e) click on [add...] and open the [select object] screen. (f) open the directory where the printer which you wish to connect to the print server is located from the [directory context:] list. (g) select the printer you wish to connect to the print server from th...

  • Page 28

    22 okilan 320e network card (h) open [user environment setup] and confirm that [printer type] is set to [other/ unknown]. The default of [printer type] is [parallel] and this must be set to [other/ unknown]. Setting up the remote printer using pconsole (except netware 5) in order to use this network...

  • Page 29

    English chapter 3 - network setup 23 3. To create a print server: (a) select [change context] from [items that can be used]. (b) press insert key in the text box [enter context:]. (c) move the cursor to the directory where you will create a print server from [object, class] and press f10 key. The co...

  • Page 30

    24 okilan 320e network card note: you must set this. If you omit this, this network card will not operate. (i) press the esc key to save the change and complete the printer environment setup. 5. To define the printer and connect it to the print queue of the print server: (a) select [change context] ...

  • Page 31

    English chapter 3 - network setup 25 (m) press the esc key in [service printers] to end. Setting up queue server mode this network card can serve as a print server and connect print queues. Set print server, print queue and printer in the file server in the same manner as described in “setting up qu...

  • Page 32

    26 okilan 320e network card this section describes how to do this, using an example in the network which is the nds environment, except for dv2. Type the following in the system console of the netware server: set bindery context = dv2.Design.Company[ret] you can also set the bindery context by direc...

  • Page 33

    English chapter 3 - network setup 27 to log in, you need to log in to the nds server. Select nds server in the netware client32 log-in window, and log in without checking the [bindery connection] check box. After logging in from the admin account (or an account to which an administrator privilege is...

  • Page 34

    28 okilan 320e network card notification message is displayed to the users displayed in the user list opened here. If no user name is displayed here, no notification is issued. To confirm or change the notification interval, proceed to step 8. 8. The settings of the notification interval are display...

  • Page 35

    English chapter 3 - network setup 29 5. To change the notification interval, select the object(s) you wish to change from [notify] list opened in step 4 and press enter key. Change [first] and [next] to desired times on [notify setting] window. 6. To delete the object(s) of notification, select the ...

  • Page 36

    30 okilan 320e network card setting up the unix server ip address and host name in the host table using the following procedure, add the ip address and the host name (printer name) to the host table: 1. Get the ip address, which is not being used, from the network administrator and determine a uniqu...

  • Page 37

    English chapter 3 - network setup 31 example: # printcap entry for okipae 14i pageprinter on network okipage 14i:\ :lp=\ :rm=okipage 14i:\ :rp=okipage 14i:\ :lf=/var/adm/lpd-errs: \ :sd=/var/spool/lpd/ okipage 14i: if there is # at the beginning of the line, this line becomes a comment. If you enter...

  • Page 38: Setting Up The Client

    32 okilan 320e network card setting up the client setting windows95/98/me windows nt server 4.0 environment setting control panel 1. From [control panel], double-click on [network]. 2. Make sure that the following items are in the configuration of [network setup]. If not, click on [add...] to add th...

  • Page 39

    English chapter 3 - network setup 33 6. If you cannot find it in the list, click on [add port...], and click on [browse] from the [add port] screen to select. Netware 3.X environment setting control panel 1. From [control panel], double-click on [network]. 2. Make sure that the following items are i...

  • Page 40

    34 okilan 320e network card adding a printer refer to “windows nt server 4.0 environment” on page 32. Setting up a printer refer to “windows nt server 4.0 environment” on page 32. Netware 4.X and 5 bindery environment setting control panel 1. From [control panel], double-click on [network]. 2. Make ...

  • Page 41

    English chapter 3 - network setup 35 5. On [bindings] tab, check [client for microsoft networks] and [file and printer sharing for microsoft networks]. 6. Click on [ok] and end setting up. Setting up printer network settings the workgroup name and host name must be set to the printer. These names mu...

  • Page 42

    36 okilan 320e network card 2. (firmware ver. 1.06 only) the printer does not support master browser function. At least one pc, which acts as the master browser, should exist and the workgroup name of the printer should match to one of workgroup names existing on the network, otherwise an error is d...

  • Page 43

    English chapter 3 - network setup 37 also, the printer name is set to okipage 14i. If there are several okipage 14i printers in the same zone, the network card automatically adds the numbers in ascending order to the printer names, in the order the printers are turned on. For example, when two zones...

  • Page 44

    38 okilan 320e network card 3100eugb.Book page 38 friday, march 16, 2001 1:18 pm.

  • Page 45: Using Administrative Tools

    English chapter 4 - administrating network printers 39 chapter 4 - administrating network printers using administrative tools okiview refer to “okiview32 for windows 95/98/me/nt4.0/ 2000” on page 65. Web this network card supports web browsers such as netscape navigator and microsoft internet explor...

  • Page 46

    40 okilan 3100e network card general settings system information system contact system name system location protocol options tcp/ip netware ethertalk netbeui frame options frame type tcp/ip method for assigning ip address use fixed ip address specified below dhcp/bootp rarp fixer ip address settings...

  • Page 47

    English chapter 4 - administrating network printers 41 some web browsers do not support frame display and this depends on the version of the web browser, but functionality is not affected. This network card recommends the use of the following browsers: • netscape navigator ver. 3.0 and higher • micr...

  • Page 48

    42 okilan 3100e network card if the change is not successful, the message “oki private mib isn’t updated correctly!” is displayed. Check if the set value is correct. Note 1: web and telnet cannot be connected at the same time. Note 2: the printer status during reception of postscript data will not b...

  • Page 49

    English chapter 4 - administrating network printers 43 frame types. This network card can select the following frame types, but please note that certain network functions will become disabled depending on the setup. Snmp and okiview utility can be used independent of the frame type setting. Please n...

  • Page 50

    44 okilan 3100e network card setup, in some cases, “security information” dialogue is displayed every time the size is changed. If this occurs, uncheck the check box of “show this alert next time” of “security information” dialogue. Telnet you can set up this network card using the telnet in the net...

  • Page 51

    English chapter 4 - administrating network printers 45 q-server (bindery) netware file server set name of file server to connect 1- 8 servers, each 1 - 48 characters. Default: blank netware queue set name of print queue to connect 1- 4 queues for each file server, each 1- 48 characters. Default: bla...

  • Page 52

    46 okilan 3100e network card telnet provides the following commands: • after the settings are made with the set command, they become valid when you log out the telnet. • the kill command severs the connection with the connection no that has been specified with n of “kill n”. The executed command bec...

  • Page 53

    English chapter 4 - administrating network printers 47 used in windows95 and ip address for the printer is 192.36.253.96 and the mac address for the network card is 00808704106c. The above ip address of the printer and the mac address for the network card can be verified by printing the menu with th...

  • Page 54

    48 okilan 3100e network card type “y” to enable dhcp will you use rarp? (y/n): n [enter] type “y” to enable rarp ip addr (old) 192.36.253.96 (new) 192.36.253.100 [enter] subnet mask (old) 255.255.255.0 (new) [enter] default gateway (old) 192.36.253.254 (new) [enter] are you re-setting (y/n): n [ente...

  • Page 55

    English chapter 4 - administrating network printers 49 queue server mode print server name: set the name of the print server. Polling rate: specify an inquiry interval on if there is a print queue in the file server. Queue server mode (bindery) file server name: specify the file server to which the ...

  • Page 56

    50 okilan 3100e network card > select netware print mode auto=1 q-server (bindery)=2 q-server (nds)=3 r- printer=4 exit=0: 1 [enter] > print server name (1-47char) : pserver12i [enter] fileserver1 name (1-47char) : nwserver [enter] fileserver2 name (1-47char) : [enter] fileserver4 name (1-47char) : ...

  • Page 57

    English chapter 4 - administrating network printers 51 status - - ‘2’ netware r-printer mode status - - ‘3’ ethertalk status - - ‘4’ exit - - ‘0’ type “4” and press the enter key. Then the current settings are displayed. 2. Change the settings. Okipage> set protocol [enter] > tcp/ip=1 netware=2 ethe...

  • Page 58

    52 okilan 3100e network card 2. Change the settings. Okipage>set protocol [ret] > t c p/ ip =1; ne tw a re=2 ; e the rtal k=3 netbeui=4; snmp trap=5 exit=0 : 2 [ret] will you use netbeui ? (y/n) : y [ret] enter “n” if you will not use netbeui. Computer name(1-15char) : op04106c [ret] w o r k g r o u...

  • Page 59

    English chapter 4 - administrating network printers 53 1. Confirm the current settings. Okipage>show protocol > netware q-server mode (bindery) status ‘1’ netware q-server mode (nds) status - - ‘2’ netware r-printer mode status - - ‘3’ ethertalk status - - ‘4’ netbeui status - - ‘5’ snmp status - - ...

  • Page 60

    54 okilan 3100e network card snmp manager (hp openview) o k i p a g e 1 4 i a n d t h i s n e t w o r k c a r d s u p p o r t management information base (mib). Mib is information that is sent/received between the managing host and the devices that are managed, with snmp protocol, for the network ma...

  • Page 61

    English chapter 4 - administrating network printers 55 7. Select [private] from [mib object id] window and click on [down tree]. 8. Similarly, using [down tree], select trees in order of [enterprises], [okidata] and [peripheral. 9. [printer] and [printserver] are displayed. Select [printer} to see t...

  • Page 62

    56 okilan 3100e network card 2. Select the object the settings of which you wish to change in [mib object id] and click on [start query]. 3. If you click the currently set values in [mib values] window, the current values are displayed in [mib instance] text box and [snmp set value] text box. 4. Ent...

  • Page 63

    English chapter 4 - administrating network printers 57 4. Select the [netware] tab and click on [operating mode] from the left column. Set the print server operating mode from the given options on the right. 5. If you are running a netware 4.X network, click on [netware directory services] from the ...

  • Page 64: Printer Settings

    58 okilan 3100e network card printer settings for the basic use of the printer’s operator panel, please refer to the user’s guide for the printer. Please wait for a minimum of 30 seconds before turning the power off to the printer. It will take about 30 seconds for the printer to save a menu change ...

  • Page 65

    English chapter 4 - administrating network printers 59 setting tcp/ip to use this network card in the tcp/ip protocol, tcp/ ip must be set to enable on the printer’s operator panel. Tcp/ip enable/disable 1. Confirm that the printer is in the idle state from the lcd panel and the indicator. 2. Press ...

  • Page 66

    60 okilan 3100e network card byte4 using the same procedure above as for sm byte1. Setting gateway address 1. Following the procedure of “setting subnet mask” above, press menu1 button until gw byte1 is displayed. 2. Change the address by pressing left arrow button or right arrow button. (if you hol...

  • Page 67

    English chapter 4 - administrating network printers 61 3. Press menu1 button repeatedly to display network. After network is displayed, press enter button. 4. Tcp/ip is displayed. Press menu1 button repeatedly to move to netware. 5. When you see that the bottom column of the lcd of the netware is en...

  • Page 68

    62 okilan 3100e network card 6. If the bottom column of the lcd is disable*, press left arrow button or right arrow button to have enable displayed in the lcd bottom column. Then press the enter button to have enable* displayed. Then press on-line button to exit the menu. Ethertalk is now enabled. S...

  • Page 69

    English chapter 4 - administrating network printers 63 3. Press menu1 button repeatedly to display network. After network is displayed, press enter button. 4. Tcp/ip is displayed. Press menu1 button repeatedly to move to net mnt and press enter button. 5. Press menu1 button repeatedly to display fac...

  • Page 70

    64 okilan 3100e network card 3100eugb.Book page 64 friday, march 16, 2001 1:18 pm.

  • Page 71: Me/nt4.0/2000

    English chapter 5 - utilities installation 65 chapter 5 - utilities installation okiview32 for windows 95/98/ me/nt4.0/2000 the okiview32 utility provides a simple, quick way of configuring and maintaining oki network printers. The main screen contains the okiview32 printer list of network printers....

  • Page 72

    66 okilan 320e network card of this view enables filtering of the printers in the right screen by various items (manufacturer, model, etc.). Properties page the printer properties menu is the entry point for co mple te pri nte r ma nage ment . A ll s t at us and configuration sub-menus are found her...

  • Page 73

    English chapter 5 - utilities installation 67 printer options properties page the printer option menu is a series of dialogs that allow the user to configure any printer's paper handling and advanced features. Network properties page the network screen has two main sub-menus: proto- cols, frame type...

  • Page 74: Nt4.0/2000/me

    68 okilan 320e network card oki lpr for windows 95/98/ nt4.0/2000/me what is oki lpr utility? Oki lpr utility is a utility for printing to okipage 14i printer connected to ethernet, from windows 95/98/ nt4.0/2000/me, using the lpr function of the tcp/ip protocol. Operating environment the utility ru...

  • Page 75

    English chapter 5 - utilities installation 69 network] tag. If they are not found, add them in the following procedure: (a) click on [add...] in the [set network] tag and open [add network configuration file(s)]. (b) select [protocol] in the [network configuration file to be installed:], then click ...

  • Page 76

    70 okilan 320e network card 5. When setup is completed, the following folders are created: (a) c:\program files\okidata\oki lpr utility (install software folder) (b) c:\program files\okidata\oki lpr spool (spool range of print data) (c) c:\program files\okidata\common (common dll folder). Uninstall ...

  • Page 77

    English chapter 5 - utilities installation 71 2. Select [confirm connections...] in the [remote print] menu. 3. Enter the printer’s ip address in [ip address] of the [confirm connections] window. 4. Click on [ok]. Then the ip address you have entered and the printer are linked. Deleting lpr printer ...

  • Page 78

    72 okilan 320e network card [finish] window displays the total number of print jobs after the lpr utility is activated. This will be cleared when the lpr utility is re-started. [queue] window displays the number of print jobs that are currently spooled. Print job display displays print jobs that are...

  • Page 79

    English chapter 5 - utilities installation 73 confirming printer status you can confirm printer status as follows: 1. Select the printer that you wish to confirm from [oki lpr utility] window (printer name turns blue). 2. Select [printer status...] of the [remote printer] menu on [oki lpr utility] w...

  • Page 80

    74 okilan 320e network card 3100eugb.Book page 74 friday, march 16, 2001 1:18 pm.

  • Page 81: Checking Status Codes

    English chapter 6 - troubleshooting 75 chapter 6 - troubleshooting checking status codes when an error occurs in data reception/transmission using this network card, the printer’s lcd panel displays host/if error. In this case, check the status code using the following procedure, write down the stat...

  • Page 82: Understanding Status Codes

    76 okilan 320e network card understanding status codes this area has 4 bytes and holds the most recent four error states. In the figure, the numbers shown at byte1 are the oldest of the four errors while the numbers shown at byte 4 are the newest error. The number shown in each byte indicates the su...

  • Page 83

    English chapter 6 - troubleshooting 77 troubleshooting by protocol common network functions do not work at all. Does operation panel menu display item “network”? No reload network program. Displayed? No yes end yes yes replace network board set ip address from operation panel and send ping to that a...

  • Page 84

    78 okilan 320e network card tcp/ip related cannot print with ftp. No yes remove cable connected to terminal working normally and connect to this machine. Response? Reload network program. Works? Yes no end replace network card since network is working, refer to other sections on troubleshooting. End...

  • Page 85

    English chapter 6 - troubleshooting 79 are ip address and subnet mask set correctly (printer and host)? No yes set ip address and subnet mask correctly when router exists between host and printer, is router set correctly? No yes set router correctly or access printer from host which does not go thro...

  • Page 86

    80 okilan 320e network card cannot refer to printer settings or change them with telnet. Has network excessive traffic or is there an abnormality? No yes find the source of the problem and bring the network back to a normal state. Refer to common troubleshooting above end can log in with telnet. Use...

  • Page 87

    English chapter 6 - troubleshooting 81 cannot refer to the printer settings or change them using web. 1. Check if you can refer to or change the printer settings using telnet. 2. Check the settings of the browser to be used and accompanying server side settings. Did you enter root for login? If you ...

  • Page 88

    82 okilan 320e network card does not display printer status correctly on web. Change the browser setting from “load from cache” to “load every time”. Can refer to/change the settings in telnet no yes refer to section on telnet. Is telnet logging in? Yes no web is inaccessible while telnet is logging...

  • Page 89

    English chapter 6 - troubleshooting 83 if you access the menu page displayed on the left on web, sometimes the entire page becomes the menu page. On several browsers, sometimes the above display occurs, depending on how you click (a bit of dragging). (browser function.) cannot print with lpr. 1. Che...

  • Page 90

    84 okilan 320e network card is printer server’s usable frame type 802.2 or 802.3 no yes set print server’s frame type to 802.2 or 802.3 is operation panel frame type auto or does it match netware route print server no yes set operation panel frame type to auto or match with router or print server. M...

  • Page 91

    English chapter 6 - troubleshooting 85 cannot connect in q-server mode. Is level 2 menu netware set to enable no yes set level 2 menu netware to enable. Is netware mode set to auto or q-server no yes set netware mode to auto or q-server. Does netware router exist between file server and printer? Yes...

  • Page 92

    86 okilan 320e network card ethertalk related cannot print from macintosh. Is there excessive traffic or an abnormality on the network? Yes no find source of the problem and return network to normal state. Used in netware/ip environment capsulated by ip? Yes no does not support packets capsulated by...

  • Page 93

    English chapter 6 - troubleshooting 87 netbeui related cannot print with netbeui can select okipage 12i or 10i using the okipage 12i or 10i printer driver with chooser? No yes is zone set in ethertalk? No yes refer to common troubleshooting ab is printer driver for okipage 12i or 10i installed in ma...

  • Page 94: Important Points

    88 okilan 320e network card important points common • to set ip address, you must consult the network administrator. If the same ip address is used by multiple machines, a serious error will result on network. • it will take about 30 seconds to change the settings of this network card. When setting ...

  • Page 95

    English chapter 6 - troubleshooting 89 • if the printer connection cutoff message is issued very often in the remote printer mode, change the notification settings with pconsole. See “message display in remote printer mode” on page 17. When setting in netware 4.X and 5 environment • you must set pri...

  • Page 96

    90 okilan 320e network card when using web server • some of the web browsers do not support the frame display, depending on the versions. See “web” on page 39. • you cannot connect web and telnet at the same time. See “web” on page 39. • you can change the frame type of this network card from web br...

  • Page 97: About Selftest (Loop Back

    English chapter 7 - cautionary notes 91 chapter 7 - cautionary notes about selftest (loop back test) the selftest menu of netmnt, which is located in network of menu2 on the printer, is for inspecting the hardware of this network card at factory shipping. General users must not execute selftest. If ...

  • Page 98

    92 okilan 320e network card 3100eugb.Book page 92 friday, march 16, 2001 1:18 pm.

  • Page 99

    English 93 a administration hp jetadmin 56 hp openview 54 okiview 39 snmp manager 54 telnet 44 web 39 appletalk 57 b bindery environment netware 4.X and 5 25 print environment 26 setting up 25 windows 95/98 34 d default settings 62 deleting a printer 70 dhcp ip address setting 29 e ethertalk 50 prin...

  • Page 100

    94 okilan 320e network card m mac address 41 macintosh printer driver 36 printer name 36 printer setup 36 setting up client 36 zone name 36 message display netware 3.X 17 remote printer mode 17, 27 mib values changing 55 network card 55 printer 55 setting 54 n nds environment netware 4.X and 5 18 wi...

  • Page 101

    English 95 client servers 7 novell client 32 netware administrator utility 28 o okilpr 68 deleting a printer 70 installation 69 ip address 70 network adapter 68 operating environment 68 other functions 72 printer driver setup 69 printer setting 68 printing methods 71 registering a printer 70 setting...

  • Page 102

    96 okilan 320e network card windows 2000 13 windows nt4.0 10 printing methods 71 printing the network card settings 5 properties page 66 q queue server mode netware 3.X 16 netware 4.X and 5 25 r raw printer windows 2000 12 registering a printer 70 remote printer mode message display 17, 27 netware 3...

  • Page 103

    English 97 telnet administration 44 ethertalk environment 50 items that can be set 44 logging in 47 netware environment 48 setting tcp/ip environment 47 troubleshooting by protocol 77 ethertalk 86 netbeui 87 netware 83 status codes 75 tcp/ip 78 u unix host name 30 ip address 30 printer data base 30 ...

  • Page 104

    98 okilan 320e network card okilpr 68 okiview 65 printer sharing 10 server environment 32 setting up client 36 setting up server 8 z zone name 36 3100eugb.Book page 98 friday, march 16, 2001 1:18 pm.