Oki OKIPAGE10e Quick Start Manual - page 11

Quick Start Guide

E-11

|

Loading Paper

1 Slide the tray out of the printer.

!

 The paper gauge (1) indicates how much paper remains

in the tray; you don’t have to slide the tray out to check.

2 Adjust the tray guides for the correct paper size.

3 Fan a stack of paper and place it in the tray under the tabs.

Do not fill above the “PAPER FULL” mark.

!

Recommended paper weight for the tray is 16 to 28 lb

(60 to 105 g/m

2

).

4 Place the tray into the printer then push closed until the

tray locks in place.

Using Legal Size Paper

To load legal size paper, open out the tray extender and

adjust the rear paper guide.