Oki VB100VK Specifications - Fcc Ce
Cabling Systems & Solutions
UTP = Unshielded Twisted Pair
Rev092007 VGE01
Specification:
Model Number
VB100VK
Environment VGA.
VESA
VP&D 1.0, VIP ver 2.0
Devices
VGA monitors, LCD projection screen, Laptops, PCs.
Input Signals
Video : 1.1V P-P
Horiz & Vert Sync : TTL standard. 300kHz max. bandwidth
Insertion Loss
Less than 3dB per pair over the frequency range
Video Signal Return Loss
-15dB max from DC to 60Mhz
RJ-45 Pin Configuration
R video (Red): Pin 1 (+), Pin 2 (-) Balanced
Gvideo (Green): Pin 4 (+), Pin 5 (-) Balanced
B video (Blue): Pin 7 (+), Pin 8 (-) Balanced
Horizontal Sync: Pin 3, Vertical Sync: Pin 6
Input : RGB 75 ohms (DB15 HD) Unbalanced
Output : RGB 100 ohms (RJ45 shielded) Balanced
Impedance
Horizontal and vertical sync : TTL standard
Transmission Distance
60~135m (depend on image resolution)
Cable
CAT 5 Shielded Twisted Pair Cable
Temperature Operation: 0 to 55
°
C, Storage: -20 to 85
°
C, Humidity: up to 95%
Dimensions W x H x D mm
110 x 77 x 24mm
Application Tips:
Must use STP RJ-45 connector (shielding – metal housing). The correct cable connection is as follows:
If your RJ-45 connector is plastic housing (unshielded), then the cable connection must be as follows:
FCC CE
C-TICK
1. STP (shielding twisted pair) Cable
2. STP (shielding) RJ45 connector
with STP cable connection.
1. The ground cable must pull out
around 5-10cm length to connect
with VGA BALUN’s D-SUB screw
for grounding.