Oki X400 Assembly Instructions

Manual is about: X400 Programming Command Manual

Page of 4

Download

Bookmark us

Cutter Assembly Installation ........................1

Installation de l'assemblage de coupeuse.....3

Cutter Assembly Installation

The cutter assembly permits the automated cutting of labels, tags, or tickets. It has a back feed function

for retracting the label back to the first print position after cutting. The instructions below assume that

the unit has no other attachments that interfere with the cutter installation.

CAUTION

Printer electronics are susceptible to static discharge. Ensure appropriate grounding

measures are taken before beginning any activity inside the printer.

1. Turn off the power and disconnect the power supply cord.

2. Lift the cover (1) to access the print assembly (2).

3. Simultaneously press the two purple buttons located on the top side of the print assembly (2) and

pivot it upward.

4. Remove the two screws (3) securing the front cover (4) to the cover hinge (5).

58397001

1 2 3 4 Next › »

Page 1
Cutter assembly installation ........................1 installation de l'assemblage de coupeuse.....3 cutter assembly installation the cutter assembly permits the automated cutting of labels, tags, or tickets. It has a back feed function for retracting the label back to the first print position afte...
Page 2
2 5. If the peeler (6) is present, remove the screw (7), then move the peeler to the right and lift it (6) off. 6. Remove the power switch (8) from the housing (9) and disconnect its leads. Tuck them safely away in the housing, leaving them unconnected. 7. Remove the two screws (10) securing the hou...
Page 3
3 installation de l'assemblage de coupeuse l'assemblage de coupeuse permet la découpe automatisée des étiquettes, des étiquettes volantes, des tickets et des billets. Elle propose une fonction d'alimentation inversée pour ramener l'étiquette à la première position d'impression suite à une découpe. O...
Page 4
4 6. Retirez l'interrupteur d'alimentation (8) du boîtier (9) et débranchez ses fils. Rangez-les sécuritairement dans le boîtier, en les laissant débranchés. 7. Retirez les deux vis (10) fixant le boîtier (9) à l'assemblage de base (11), puis soulevez le boîtier (9) pour le sortir de la base (11). N...