P&E Microcomputer Systems DEMOQE128 User Manual - System Setup

20

DEMOQE128 User Manual

dialog. If the startup dialog is not shown, it may be opened from the 

CodeWarrior menu by clicking “File” and then “Startup Dialog… ”.

3.

From the Freescale CodeWarrior Tutorials menu select the tutorial 

you would like to view.

4.

Select “Click here to start tutorial” and follow on-screen instructions. 

4

SYSTEM SETUP

4.1

Overview

P&E’s Embedded Multilink driver is required to operate the DEMOQE128 

using a PC. The Embedded Multilink driver should be installed with the 

CodeWarrior Development Studio software or from the DEMOQE Resources 

in the DVD-ROM before the PC is connected to the DEMOQE128.

4.2

Operating System Requirements 

The following are the resources required to run the CodeWarrior 

Development Studio and the DEMOQE128:

•

A PC-compatible system running Windows 2000, Windows XP, or 

Windows Vista

•

128MB of available system RAM, and 1GB of available hard disk 

space

•

A DVD-ROM drive for software installation

•

A USB port

4.3

Software Setup

4.3.1

Installing CodeWarrior Development Studio

To install the CodeWarrior Development Studio, Follow the instructions in the 

Section 3.1 - Quick Start Guide.

4.3.2

Installing P&E Resources

Use the DEMOQE Resources in the DVD-ROM to access and install P&E