P.I. Engineering X-keys Desktop Product Manual - Command Symbol Legend
4
Special Programming Features:
All special programming features on the X-keys are accessed by the same steps:
1. Slide the programming switch to put the X-keys into programming mode (the layer indicator will blink).
2. Tap the key that you want to program (the layer indicator will double-blink).
3. Press and hold the Esc key.
4. Press and release the associated command key (see table and instructions below).
5. Release the Esc key.
6. Confirm programming on the key (the layer indicator will blink).
7. Slide the programming switch back to the operating position (the layer indicator will glow steadily).
Once you become familiar with the special programming features on the following pages, this list of key
commands serves as a useful reference.
Command Symbol Legend
indicates when to press and hold a key down
indicates when to tap a key
indicates when to release the key.
<> Chevrons indicate the key to be pressed
NOTE: All numbers are on the alphanumeric section of the keyboard (not the number pad).
Single Key Programming Features
Feature
Associated Keystrokes
Layer-toggle
Layer-shift
Repeating Key
Separate Press and Release
Pause
Erasing a Key
Entire Keyboard Programming Features
Feature
Associated Keystrokes
Slow Transmission Speed
Normal Speed
Caps Lock/Unlock Memory
Caps Lock/Shift Unlock Memory
No Caps Lock Memory
Resetting the Keyboard
Backlighting on X-keys Stick
Backlighting toggle key
Default backlighting on/off