Summary of MX230
Page 1
Mx230 user guide pocket-size 4g portable mifi modem.
Page 2: User’S Manual Contents
User’s manual contents 1. Introduction 01 1.1 cautions 1.2 contents in the package. 1.3 device introduction. 1.4 device information 1.5 led indication. 2. Operations 05 2.1 setting up wifi connectivity. 2.2 setting up usb connectivity. 2.3 driver installation for windows xp only (first time installa...
Page 3: 1. Introduction
1. Introduction pocket-size 4g portable mifi modem 01 1.1 caution. Keep away from water and high humidity. Use in clean and dry place. Do not place near hot objects. Place on a stable platform to avoid dropping. Do not keep in areas with electromagnetic waves. Do not place heavy objects on the devic...
Page 4
Pocket-size 4g portable mifi modem 02 1.4 device information the wimax mx230 portable router 1 3 2 4 5 6 no. Device component 1 power button 2 usb / charging connector 3 reset button 4 battery led 5 wifi led 6 4g led.
Page 5
Pocket-size 4g portable mifi modem 03 the operation/battery charging time the mx230 can be charge by using the provided wall adaptor or via the computer usb port. Please refer the table below for charging guidelines. No. Description approximate time 1. Full charging time computer usb port usb wall a...
Page 6
Pocket-size 4g portable mifi modem 04 1.5 led indication battery status–battery led 61-100% green (static) 31-60% amber (static) 0-30% red (static) charging in progress red (static) fully charged green (static) 4g status signal searching for 4g signal / out of zone red (blinking) weak 4g signal red ...
Page 7: 2. Operations
Pocket-size 4g portable mifi modem 05 2. Operations 2.1 setting up wifi connectivity. 1. For 1st time wifi connection, power on the mx230 modem and ensure the wifi led is on(green color). 2. On your wifi-enabled devices, perform a wifi scan or search and select the p14g-spot-xxxxx as printed on the ...
Page 8
Pocket-size 4g portable mifi modem 06 2.2 setting up usb connectivity. 1. Mx230 can connect 1 pc or laptop device to get 4g internet access through the micro usb cable provided. It is recommended that you power up your mx230 first before you connect the usb cable to a pc or laptop device. 2. Open th...
Page 9
Pocket-size 4g portable mifi modem 07 2.3 driver installation for windows xp only (first time installation) to use wimax connection through the micro usb cable directly, you will need to install the rndis driver. Connect the mx230 to your pc/laptop using the micro usb cable provided. Run the install...
Page 10
Pocket-size 4g portable mifi modem 08 5. Once the installation is completed, close it. 6. Press 3 times of the device’s power button continuously within 1.5 seconds again to switch back to usb mode. 7. The installation disk will be disappeared from my computer. 8. You can now start using the device..
Page 11: 3. Configuration Via Web.
Pocket-size 4g portable mifi modem 09 3. Configuration via web. 3.1 connect to device first connect the mx230 to your pc/laptop using the micro usb cable provided or access via wifi. Connect to mx230 web user interface 1. Access to the mx230 web user interface. 1. Open the web browser on your comput...
Page 12
Pocket-size 4g portable mifi modem 10 3. Summary (main interface) display mx230 information and basic configuration of the device..
Page 13
Pocket-size 4g portable mifi modem 11 3.2. Wifi settings 1. Basic settings to enable the ssid broadcast, set wireless mode, channels, signal strength and maximum client connection. 2. Security settings to set wireless security, for example on the authentication method, acl policy and access control ...
Page 14
Pocket-size 4g portable mifi modem 12 3.3 advanced settings 1. Wimax information this will display the wimax information, e.G: device status, connected time, ip address, subnet mask, gateway and dns. 2. Firewall to enable the firewall settings:.
Page 15
Pocket-size 4g portable mifi modem 13 3. Router settings to enable the router settings, e.G: dhcp server, ip reservation, ip lease status, port forwarding and dmz host..
Page 16
Pocket-size 4g portable mifi modem 14 3.4 device setup 1. Password settings to enable user to change mx230 login password 2. Time settings to enable user to view the local time and to enable ntp settings.
Page 17
Pocket-size 4g portable mifi modem 15 3. Reset device to enable user to reset the settings to factory default 4. User firmware auto update upon turning on from standby mode or from shut down, mx230 will search for firmware updates from p1. If a new firmware is found, the mx230 will perform an automa...
Page 18
Pocket-size 4g portable mifi modem your personal 4g wifi.