PA NOVA 400 Technical Manual
Last Update: 14/02/12
1
NOVA 400 inox
Spray gun - 400 bar – 40 MPa (AISI 303))
Technical manual :
E 119
Guns suitable for use up to 400 bar – 40 MPa rated pressure pumps.
No fluid passage upon trigger release.
DN10
TECHNICAL SPECIFICATIONS
P/N
RATED
PRESSURE
bar - MPa
PERMISSIBLE
PRESSURE
bar - MPa
MAX FLOW
RATE
I/min
(1) MAX
TEMPERATURE
°C
INLET
OUTLET
WEIGHT
gr
30.5650.00
400 - 40
440 - 44
40
160
G3/8 G1/4 FF
840
30.5650.50
400 - 40
440 - 44
40
160
3/8NPT 1/4NPT FF
840
(1) The gun has been designed for continuous use, at a water temperature of 90°C (195°F). It can resist a t the max
temperature of 160°C (320°F) for short periods only , as, when the gun shuts off, the heater continues to transmit the heat
to the water, thus increasing both temperature and pressure up to high, dangerous values.
Using the gun at a water temperature higher than 60°C involves for the operator the use of adequate sa fety devices,
such as gloves, glasses, etc.
Instruction manual, maintenance, installation, spare parts.
For a correct utilization, follow the directions of this manual
Re-print them on the Use and Maintenance booklet of the machine.
n. 12.9119.00
•
30.5650.00 NOVA 400 G3/8 G1/4 FF
•
30.5650.50 NOVA 400 3/8NPT 1/4NPT FF
- Covered by shockproof plastic semi-housings
- Seat and shutter in Sst
- Totally built in stainless steel AISI 303
- Ergonomic construction
- Minimum fatigue for trigger opening and use