PA RL22 Technical Manual
Last Update: 07/07/10
1
RL22
– Spray gun 310 bar – 31 MPa
Technical manual :
E 134
Guns suitable for use up to 310 bar – 31 MPa rated pressure pump.
No fluid passage upon trigger release.
DN10
TECHNICAL SPECIFICATIONS
P/N
RATED
PRESSURE
bar - MPa
PERMISSIBLE
PRESSURE
bar - MPa
MAX FLOW
RATE
I/min
(1) MAX
TEMPERATURE
°C
INLET - OUTLET
WEIGHT
gr
30.0400.00
310 - 31
350 - 35
40
160
G3/8 F - G1/4 F
475
30.0420.00
310 - 31
350 - 35
40
160
G3/8 F - G1/4 F
490
(1)
The gun has been designed for continuous use, at a water temperature of 90°C (195°F). It can resist at
the max temperature of 160°C (320°F) for short peri ods only, as, when the gun shuts off, the heater
continues to transmit the heat to the water, thus increasing both temperature and pressure up to high,
dangerous values.
Using the gun at a water temperature higher than 60°C involves for the operator the use of adequate sa fety
devices, such as gloves, glasses, etc...
Instruction manual, maintenance, installation, spare parts.
For a correct utilization, follow the directions of this manual
Re-print them on the Use and Maintenance booklet of the machine.
n. 12.9134.00
•
30.0400.00 RL22 G3/8 G1/4 FF
•
30.0420.00 RL22 SW8 G3/8 G1/4 FF
- Front hose fitting on handle
- Covered by shockproof plastic semi-housings.
- Seat and Ball in Sst
- Internal structure in brass and Sst.
- Ergonomic construction
- Minimum fatigue for trigger opening