PA RL26 30.1790.00 Technical Manual
Last Update: 07/07/10
1
RL26
Weeping –
Spray gun 250 bar – 25 MPa
Technical manual :
E 138
Guns suitable for use up to 250 bar – 25 MPa rated pressure pumps.
DN10
Always leaks a small quantity of fluid.
TECHNICAL SPECIFICATIONS
Maximum temperature 160°C (1)
P/N
RATED
PRESSURE
bar - MPa
PERMISSIBLE
PRESSURE
bar - MPa
MAX FLOW
RATE
I/min
WEEPING WITH
PRESSURE
2.8 bar – 0.3 MPa
l/min
INLET
OUTLET
WEIGHT
gr
30.1790.00
250 - 25
280 - 28
30
1.1 ÷ 1.3
G3/8 G1/4 FF
380
30.1790.50
250 - 25
280 - 28
30
1.1 ÷ 1.3
3/8NPT 1/4NPT FF
380
30.1792.00
250 - 25
280 - 28
30
1.1 ÷ 1.3
G3/8 G1/4 FF
400
30.1795.00
250 - 25
280 - 28
30
0.6 ÷ 0.8
3/8NPT 1/4NPT FF
380
30.1794.00
250 - 25
280 - 28
30
0.6 ÷ 0.8
G3/8 G1/4 FF
400
(1) The gun has been designed for continuous use, at a water temperature of 90°C (195°F). It can resist a t the max
temperature of 160°C (320°F) for short periods only , as, when the gun shuts off, the heater continues to transmit the heat
to the water, thus increasing both temperature and pressure up to high, dangerous values.
Using the gun at a water temperature higher than 60°C involves for the operator the use of adequate sa fety devices,
such as gloves, glasses, etc.
Instruction manual, maintenance, installation, spare parts.
For a correct utilization, follow the directions of this manual
Re-print them on the Use and Maintenance booklet of the machine.
n. 12.9138.00
•
30.1790.00 RL26 Weeping G3/8 G1/4 FF
•
30.1790.50 RL26 Weeping 3/8NPT 1/4NPT FF
•
30.1792.00 RL26 Weeping + SW8 G3/8 G1/4 FF
•
30.1795.00 RL26 Weeping (0.6) G3/8 G1/4 FF
•
30.1794.00 RL26 Weeping (0.6) + SW8 G3/8 G1/4 FF
- Covered by shockproof plastic semi-housings.
- Sst seat and ball.
- Internal structure in brass and Sst.
- Ergonomic construction.
- Minimum fatigue for trigger opening and use.