PA Strong PAB-9120 Installation and user instructions manual - page 5
of
8
5
3.2. (optional) Install unit in rack.
The PAB-9120/9240/9360 is designed for table top use.
If user wants to use in the rack, please screw on rack mounting bracket .
Please refer to the drawing.
3.3. Set correct AC line in voltage
Refer to the AC line in voltage select switch (4)
Set the slide switch to correct AC line in voltage.
3.4. Plug in AC power cord
Plug the AC power cord to the AC socket.
Before switch on the unit, please confirm all the installation system is properly connected.
4
Connections and settings
4.1. Balanced/unbalanced signal input
There are two types of input:
One is balanced signal, the other is unbalanced.
It is convenient for connecting the signal from external music source or preamplifiers.
Mixing Console