PA Tech PMA-200 User Manual - page 10
of
11
10
Binding post outputs:
1. Strip back insulation not more than 13mm(1/2 inch)
2. Insert wire fully so that none of the conductor is exposed: tighten barrel (use coin if
necessary)
3. Non-European models only…
4. Spade lugs must have insulated barrels to prevent electric shock.
Warning: To prevent electric shock, do not operate the amplifier with any of the
conductor portion of the speaker wire exposed.
Connections for stereo and parallel operations
Connections for bridged mono operation
SPEAKER CABLING
Larger wire sizes and shorter length minimize both loss of power and degradation of
damping factor. Do not place speaker cables next to input wiring.