PA Tech QSM-606AZ User Manual - page 6
QSM-606AZ, QSM-612AZ AND QSM-624AZ Technical Specifications
Type
Mixer Amplifier
Model
QSM-606AZ
QSM-612AZ
QSM-624AZ
Mains Voltage
AC 115V/ 230V, 50 / 60Hz ± 10% Switchable
Supply
Battery Voltage
DC 24V (MAX 10% deviation)
Output power Max:
90W
180W
380W
Rated:
60W
120W
240W
Output
Speaker outputs:
Music/speech: , 8Ω, 70V, 100V
Tape output: 1V 150KΩ
Aux output: 1V, 150Ω
Inputs
Mic 1~5: sensitivity. Adjustable (1mV), 600Ω Unbalanced.
Phono : sensitivity Mono 4mv 100K
Aux 1~3: 150mV, Mono 22K,
Frequency response
Mic 1~Mic 5: 60Hz ~ 15KHz ± 3dB
Aux 4~ 6: 50Hz ~ 20KHz ± 3dB
Phono:cmrr
Total harmonic distortion
Less than 1% at 1KHz, rated power
Signal to noise ratio
All Volume Controls C.C.W.: 80dB below rated power
Mic 1~ 5: 60dB below rated power
Phono:55 db below rated power
Aux: 80dB below rated power
Tone Controls
Bass: ± 10dB at 100Hz
Treble: ± 10dB at 10KHz
Controls
Front Panel
Power switch
5 zone control and all call push switch
Channel 1~5 volume control
Tone controls (Bass, Treble)
Master volume control
Rear Panel:
Mic 3/Phono Slide switch
Mic 4/Auxl Slide switch
Aux 3 volume control
AC 115V / 230V voltage Selector switch
Indicators
Power indicator (LED), output level indicators (6 LEDS)
AC power consumption
160W
320W
640W
DC power consumption
4A
8A
15A
Priority
Priority level ( Mic 1: 0.3mv)
Channel 1 can mute Channel3 ~5, Aux3
Dimensions ( H x W x D )mm
88(H)x425(W)x305(D)
Weight
8.2 kgs
9.5 kgs
11.5 kgs
Color
Black
Mounting options
Table top or 19” rack mountable
(5)