- 1 - user manual qsm-606e qsm-612e qsm-624e mixer amplifier.
- 2 - warning: this appliance must be earthed important the wires in the mains lead are coloured in accordance with the following code: green and yellow: earth (e) blue: neutra (n) brown: live (l) as the colours of the wires in the mains lead of this apparatus may not correspond with the coloured ma...
- 3 - qsm-6xxe amp 60w/120w/240w mixer amplifier front panel 1. Channel 1 volume control 2. Channel 2 volume control 3. Channel 3 volume control 4. Channel 4 volume control 5. Channel 5 volume control 6. Master tone control (bass) 7. Master tone control (treble) 8. Master volume control 9. Power on ...
- 4 - rear panel 1. Mains input socket 12. Mic 4/aux 1 selector switch 2.Power fuse 13. Mic 4 input (xlr jack) 3. Earth connection screw 14. Mic 3/tel selector switch 4. Dc power supply terminals 15. Mic 3 input (xlr jack) 5. Speaker output terminals 16. Mic 2 input (xlr jack) 6. Aux output (rca jac...
- 5 - microphone connection mic1~5 inputs are balanced standard xlr jack , rear panel. Mic1 input has vox priority which will override channel 3~6 and line input signals but not the channel 2 input. Line (aux/cd) connection the equipment provides an auxiliary input which may be used for connecting o...
- 6 - aux out connects the mixer/preamplifier stage to the power amplifier stage. The connecting link must be plugged in for normal operation as a mixer/amplifier. “aux out” is after the tone controls and the master volume control. Power outline voltage comply with power input voltage (iec voltage)....
- 7 - tel: 150mv, adjustable 600Ω, balanced frequency response mic 1~mic 5: 60hz ~ 15khz ± 3db aux 4~ 6: 50hz ~ 20khz ± 3db tel: 50hz ~ 15khz ± 3db(cmrr) total harmonic distortion less than 1% at 1khz, rated power signal to noise ratio all volume controls c.C.W.: 80db below rated power mic 1~ 5: 60d...
- 8 -.
