PAC F100 Instructions For Use Manual - page 15
Other manuals for F100:
Instructions For Use Manual
Manual is about: ELECTRONIC FENCE
of
34
Joining the Loop wire
13
Standard connector:
a) Strip both ends of the wire to 5mm (¼”)
b) Slide shrink-sleeve over one of the wires
c) Join the two ends together using the metal connector
d) Wrap joint tightly with the PVC tape
e) Slide sleeve over the assembly and shrink it with gentle heat.
Heatseal
tm
Connector: i) strip as above, ii) place both ends into
centre of connector iii) crimp with crimping tool iv) heatseal